17 mm ball joint - fits all iBOLT car-docks | 32x38 mm industry standard hole pattern (=AMPS) | Use as alternative to suction mount | Perfect for KUDA, Arkon, Garmin or any Pedestal type Mount | Double sided tape included and 4 screws

Easily add additional Camera accessories with this triple camera screw slider bar. This bar attaches to a tripod or mount with a ¼ inch female camera screw thread or a ⅜ inch female thread. | This camera slider bar is 10.5 inches long, is made out of sturdy aluminum, and features 3 ¼ camera screw attachments for LED lights, microphones, monitors, flash, strobe etc. | Great for viewing or recording with multiple devices at once! Great for live streamers who use multiple devices at once or someone recording side by side video for comparisons or 3D. | Easy to Use! This tripod adapter is great your the camera enthusiast, and anyone that uses an external microphone with their camcorder. | Includes Smartphone Holder with Tripod adapter. Smartphone holder fits phone and case combinations 2.2”-3.8” wide (58mm - 97mm) (From the size of an iPhone to a Samsung Note Series device)

The iBOLT 17mm Clamp for Handlebars Poles and posts is great for mounting your Garmin GPS system or any other 17mm accessory where you need it most. Use your device as a dash-cam on your motorcycle or bicycle or mount your Garmin GPS system with the 17mm ball to get directions. | INCLUDES- This kit includes an industry standard 17mm Clamp mount only INCLUDES- This kit includes an industry standard 17mm Clamp mount only | SPECS: The mount fits on bicycle or motorcycle handlebars measuring 12mm to 40mm in diameter and is easy to install with a twist of a knob. Great for mounting on tripod legs, handlebars, poles, golf carts, rails, wheelchairs, etc. | FUNCTIONALITY: Place clamp on handlebar, post, or pole fully opened and use the tightening knob to secure. | COMPATIBILITY: Works with all industry standard 17mm smartphone holders and Garmin GPS devices.

The iBOLT 17mm Dual Ball Drill Base Mount is great for mounting your GPS system or any other 17mm accessory at the optimal viewing position. Use your device as a dash-cam in your vehicle or mount your GPS system with the 17mm ball to get directions. | UNIVERSAL: This iBOLT 25mm / 1 inch ball dual AMPS Pattern Drill base mount is made out of heavy-duty composite material and is compatible with all industry-standard 1 inch / 25 mm mounting arms. Ball joints are coated in rubber material. With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. | FEATURES: a 30mmx38 mm industry-standard 4 hole pattern (=AMPS) that will work with all industry-standard AMPS adapter plates and vehicle-specific mounts. | COMPATIBILITY: Works with all industry-standard 17mm smartphone holders and is compatible with Garmin GPS devices (Garmin Drive 52 Garmin dēzl OTR series: OTR500, OTR700, OTR800, OTR1000 Garmin RV series: RV 1090, RV890 Garmin Overlander Garmin Catalyst Driving Performance Optimizer Garmin zūmo XT). | Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry-standard 1 inch / 25 mm / B size adapters and arms. | INCLUDES- This kit includes an industry-standard 1 inch / 25mm / B Size AMPS Pattern Drill Base, a 3.75 inch long 1 inch / 25mm / B Size dual ball mounting arm, a 25mm to 17mm ball adapter, screws, and VHB adhesive.

Discover the iBOLT 20mm to 25mm Dual Ball Mount Arm - the ultimate solution designed to bridge your mounting needs seamlessly. Engineered with sturdy aluminum and featuring a robust rubber-coated ball joint, this adapter is perfect for converting industry-standard 1 inch / 25mm and 20mm mounting systems. | The diameter of the ball joint is 1 inch or 25mm and the other side is 20mm. The measurement is not to describe the length of the entire adapter. Measure the diameter of the ball from the top of one end to another. | This iBOLT 20mm to 25mm Dual Ball Mount arm is made out of sturdy aluminum material and is compatible with all industry-standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material. | Commonly used as an extension arm with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch and 20mm dual ball mounts/arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount. | With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. | The length of this arm/adapter is 2.5 inches measuring from one end of the arm to the other and is made out of sturdy aluminum material.

HEAVY DUTY - The FlexPro is a heavy duty floor pedestal mounting solution that is compatible with 1 inch / 25 mm / B Size Dual Ball arms and adapters. It is designed to install directly on the passenger seat's front left mounting screws. The FlexPro allows the driver to strategically position the tablet to the right of the center console. | STURDY- The Strong but flexible gooseneck mount is ideal for industrial and work vehicles / trucks. Includes 2 mounting brackets for either seat rail or drill-base mounting options. | COMPATIBILITY: Commonly used with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mounts. | GREAT FOR BUSINESS OR PERSONAL USE - Works with most vehicles, including large trucks. Flexible mount is 18" tall and is great to Telematic systems and Fleets | ADJUSTABLE - Rotates 360 degrees for optimal viewing positions. You choose whether to move the mount's flexible arm up, down or to the left or right to the location that's best.

This iBOLT 25mm / 1 inch ball dual “Sticky-Suction” Cup base is made out of heavy duty composite material and is compatible with all industry standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material. *This product is only the iBOLT 25mm Suction Cup Base. Other images shown are to show the use of the product. | This heavy-duty mount is ideal for flat surfaces windshields, dashboards, mirrors, tables, etc. Suction base is 80mm in diameter and is completely reusable. SImply rinse the suction cup base with water and let air dry to make it reusable. | With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. | The Ball size is 1 inch (25mm) and is to be used with other industry standard 1 inch (25mm) ball mounts

This iBOLT 25mm / 1 inch ball dual VHB Adhesive base is made out of heavy duty composite material and is compatible with all industry standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material. *This product is only the iBOLT 25mm VHB Adhesive base. Other images shown are to show the use of the product. | This heavy-duty mount is ideal for flat surfaces. The adhesive is a very strong VHB and is a permanent mounting solution. To apply the adhesive disk, simply remove the red plastic from the back of the 3M VHB mounting disk, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) | With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. | The Ball size is 1 inch (25mm) and is to be used with other industry standard 1 inch (25mm) ball mounts

This iBOLT 25mm Metal ball suction cup base is made out of sturdy Aluminum, composite, and rubber material (for the suction cup base) compatible with all industry standard 25mm mounting arms, such as the iBOLT Bizmount Series. | COMPATIBILITY: The Ball size is 1 inch (25mm) and is to be used with other industry standard 1 inch / 25mm / B size ball mounts | Commonly used with IBBZ-33921 or IBBZ-33754 and other industry standard 25mm dual ball mounts / arms. This heavy-duty mount is ideal for flat surfaces windshields, dashboards, mirrors, tables, etc. Suction base is 90mm in diameter and is completely reusable. | FEATURES: a Heavy Duty 90mm non-sticky suction cup base with metal tightening lever that is great for heavy duty conditions such as truck or commercial vehicle windshields. | INCLUDES: 25mm Metal ball Non-Sticky Suction Cup Base

This iBOLT 25mm to 17mm Dual Ball Mount arm is made out of a sturdy composite material and is compatible with all industry standard 1 inch / 25 mm mounting arms. | Commonly used as an converter with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms to any industry standard 17mm bracket including Garmin GPSand iBOLT smartphone holders. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount. | With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. Converts a 1-inch/B Size/25mm Mount to a 17mm mounting pattern for Garmin GPS, iBOLT Phone holders, or any other 17mm mounting pattern device. | Length of this adapter is 2.5 inches measuring from one end of the arm to the other and is made out of sturdy composite material.*Mounts, holders, and devices sold separately

This iBOLT 25mm / 1-inch / B size AMPS Plate is made out of sturdy composite material and is compatible with all industry-standard 1 inch / 25 mm mounting arms. Ball joints are coated in rubber material. | COMPATIBILITY: Commonly used with IBBZ-33921 or IBBZ-33791 and other industry-standard 25mm / 1-inch dual ball mounts/arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry-standard compatible mount. | FEATURES: a 2 hole AMPS Diamond pattern that will work with all industry-standard AMPS (30mmx38 mm industry-standard 4 hole pattern) adapter plates and vehicle-specific mounts. | INCLUDES: 25mm / 1-inch / B Size Composite Diamond AMPS adapter plate (No screws or mounting hardware included)

17 mm ball joint - fits all iBOLT car-docks | 32x38 mm industry standard hole pattern (=AMPS) | Strong and sturdy, made out of Aluminum Metal | Perfect for KUDA, Arkon, Garmin, Proclip or any industry standard AMPS pattern mount or vehicle specific bracket | Double sided tape included and 4 screws *iBOLT Holder not included

HEAVY DUTY- Double Socket arm is made out of a strong composite material and works with all industry standard 1 inch / 25mm / B Size ball adapters. | COMPATIBILITY: Commonly used with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount. | LENGTH of this arm is 2.75 inches measuring from one end of the arm to the other. Works with 1 inch ball adapters, such as VESA 75/100 / 2T / 4 Prong / AMPS Pattern / Device Holders / 1 inch ball mount bases / etc. | FEATURES: With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees.

HEAVY DUTY- This 20mm Socket arm to 20mm Metal ball is made out of a strong aluminum material and works with all industry standard 20mm ball adapters, mounts and accessories. | COMPATIBILITY: Commonly used to extend IBBZ-33768 or IBBZ-33943 and other industry standard 20mm ball adapters, mounts and accessories. Compatible with all 20mm mounts and adapters including the iBOLT FixedPro Series and other industry standard 20mm ball mounts and adapters. | LENGTH of this arm is 4.5 inches measuring from one end of the arm to the other. | EXTEND YOUR MOUNT - Great for extending your 20mm mount without an additional ball adapter. With the 20mm metal ball end it's easy to connect and expand your current 20mm mount system. | INCLUDES: 4.5 inch 20mm ball aluminum arm and optional heavy duty ratcheting knob for heavier devices

The iBOLT Forklift overhead guard / cage mount is great for mounting and securing devices, such as, smartphones, tablets, barcode scanners, and radios. These heavy duty brackets are made out of heavy gauge steel to last in tough environments . These brackets are made to mount on forklifts, pallet jacks, or any other warehouse vehicle. | INCLUDES- Kit contains two steel plates with black powdercoat finish and metal mounting bolts | SPECS- Forklift cage mount weights 3 pounds and measures 10” x 7” x 1/8” | COMPATIBLE- with all standard 4-Hole AMPS, VESA 75, VESA 100, and Gamber-Johnson 2” x 4.09” pattern mounts and adapters, including iBOLT Mounts, Ram mounts, Proclip, Arkon Mounts, Panavise, Garmin, Gamber Johnson, etc. | MOUNT MULTIPLE DEVICES- The iBOLT Forklift Guard mount allows you to mount up to (3) 4-Hole AMPS Pattern mounts or devices at once. Completely configurable to fit your device mounting needs. *Barcode scanner adapter and mounts shown in pictures are not included

WORKS WITH ANY FLAT SURFACE: The Moto-Vise AMPs is a Heavy Duty Metal Drill base mount with an AMPS Plate pattern. This drill base mount is strong and sturdy and will fit with all industry standard AMPS Pattern adapters. The AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). Simply drill this mount onto any flat surface for a secure hold. | COMPATIBILITY: Works with all Smartphones, Midsize tablets (up to 7-8 inch tablets), and gaming devices ranging from 2.75 inches to 5 inches wide. Compatible with Smartphones- Apple iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, iPhone 6S and 6S Plus, Samsung Galaxy S9, S8, and S7, Galaxy Note 9, Note 8 Tablets, Huawei MediaPad M5 (8 inch), Samsung Galaxy Tab A 7.0, Amazon Fire 7, Asus Zenpad C 7.0 | FUNCTIONALITY: Moto-Vise holder has a strong and sturdy Spring-loaded grip, designed to hold your device in the most rugged conditions. With the secure grip, this mount can be used with motorcycles, bikes, and off-road vehicles. We recommend using two hands to insert and remove the device from the holder, this insures that your device will not be accidentally removed when adjusting the viewing angle. | HEAVY DUTY: AMPS Patterns drill base mount is constructed of heavy duty aluminum and the rugged device holder has a strong string loaded grip designed for commercial environments. The iBOLT Moto-Vise AMPS is perfect for Commercial vehicles, trucks, off-road vehicles, motorcycles, cars, wall mounting, or mounting on any flat or smooth surface. | KIT INCLUDES: This mounting kit includes : 17mm Metal Aluminum AMPS pattern mounting plate, Rugged device holder for devices 2.75 inches to 5 inches wide, set of screws, and VHB adhesive. Compatible with vehicle-specific mounts, including those offered by ProClip, Pro.Fit, Arkon and others

This iBOLT Dual Ball Mount arm is made out of heavy duty composite material and is compatible with all industry standard 1.5 inch / 38 mm ball attachments. This includes 38mm / 1.5 inch AMPS plates , VESA 75 / VESA 100 Adapters, 2T and 4 Prong adapters, 38 mm to Camera screw adapters, etc. | Commonly used as an extension arm with IBBZ-33935 or IBBZ-33934 and other industry standard 38mm / 1.5 inch / C Size ball mounts | With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. | Length of this arm is 6 inches measuring from one end of the arm to the other and is made out of heavy duty composite material. | Includes 6 inch Composite 38mm arm only

Create high quality overhead or front facing videos using your DSLR camera and the iBOLT Stream-Cast Mount. This mount installs directly onto your ceiling or wall mount stud for an installed studio set-up. This mount will support DSLR cameras and lens combinations, projectors and smartphones weighing up to 4 lbs. | FEATURES multiple adjustment arms to get optimal views and angles. Each knob features a ratchet tightening system to insure a secure hold at every adjustment point. No more vibration from clamp mounts! | HEAVY DUTY- This DSLR camera mount is made out of sturdy aluminum, including extension arms, ball joints, ¼ 20” camera screw and drill base (Phone holder and ball adapter for phone holder is made out of composite plastic) | COMPLETE YOUR SET-UP- Great for live streaming, taking overhead photos or videos, holding microphones, mini projectors, recording unboxings and more! | COMPATIBLE with phones from 2.25 to 3.75 inches wide and all industry standard ¼ 20” cameras, adapters, and accessories weighing up to 4 lbs. | INCLUDES: Metal 22 inch Stream-Cast Ceiling mount, Metal Medium extension arm, Metal Small extension arm, Metal ¼ 20” Camera screw adapter, composite ball to phone adapter, composite phone holder, and mounting screws.

HEAVY DUTY - The TabDock Bizmount AMPS is a heavy duty Multi-Angle Drill Base pedestal mounting solution for Tablets. It is designed to install directly on a table, cart, desk, in a vehicle, or on any flat surface. The TabDock Bizmount AMPS allows you to mount your tablet where you need it most. | STURDY- Has four points of contact holding on your phone and works with most cases including life proof and otter box cases. TabDock AMPS mount is incredibly strong and will stay where you mount it. Place your tablet in a horizontal position, clamp the holder into place then rotate it to a horizontal or vertical position. | UNIVERSAL DESIGN - fits all Tablets 7"-10". ( iPad , Nexus , Sony Xperia , Kindle , Samsung Galaxy Tab ). This kit includes: TadDock tablet Holder, 5” dual ball joint adjustable pedestal, screw pack and adhesive for drill base. Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry standard 1 inch / 25 mm / B size adapters and arms. | GREAT FOR BUSINESS OR PERSONAL USE - Works with most smooth surfaces, in a vehicle or a building. Has 2 adjustable points for optimal viewing positions. The TabDock Bizmount AMPS is great for business, homes, vehicles, or schools. | ADJUSTABLE - Rotates 360 degrees for optimal viewing positions. The 2 adjustable points offer freedom to completely adjust the arm to the optimal viewing position.

HEAVY DUTY - The TabDock Dock'n Lock AMPS is a heavy duty Composite locking tablet holder with a composite plastic Drill base pedestal mounting solution for Tablets. It is designed to install directly on a wall, table, cart, desk, in a vehicle, or on any flat surface. The TabDock Dock'n Lock Bizmount AMPS allows you to mount your tablet where you need it most. | SECURITY- This Heavy-duty locking tablet mount is made of strong composite plastic and is ideal for environments where keeping your tablet secure is essential. Lock your tablet in a secure position with the included keys, and replace all removable knobs with our security hardware hex key bolt (included). | UNIVERSAL DESIGN - Completely adjusts to fit all Tablets 7"-10". ( iPad , Nexus , Sony Xperia , Samsung Galaxy Tab A, Samsung Tab E, iPad Air, Google Nexus, Asus VivoTab). Dual Ball joint rotates 360 Degrees for optimal viewing positions.Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry standard 1 inch / 25 mm / B size adapters and arms. | GREAT FOR BUSINESS OR PERSONAL USE - Works with most vehicles, including large trucks, and can also be used as a secure point of sale mounting solution. The 25mm or 1 inch Shaft is made out of heavy duty composite material and will hold-up in industrial applications. | INCLUDES: This kit includes Composite locking tablet holder with keys, 6 inch dual ball adjustable mount (end to end), and Security hardware to replace all removable knobs if desired.

HEAVY DUTY - The TabDock Point of Purchase is a heavy duty Point of sale / Point of purchase mount for all 7- 10 inch tablets. It is designed to mount directly on a wall, or any flat surface. The TabDock Point of Purchase mount allows you to mount your tablet where you need it most. | STURDY- Has for points of contact for each tablet holder for a secure hold. This Point of sale tablet mount features four tablet holders that are perfect for running delivery applications, such as, DoorDash, Uber Eats, Postmates, Yelp, etc. | DESIGNED FOR POINT OF SALE - fits all 7 to 10 inch tablets in an easy-to-view position (Mount is compatible with iPad Pro 10.5 inch / 9.7 inch, iPad 7, 6, 5 ,4, 3, 2, iPad Original, iPad Air 2, iPad Air Samsung Galaxy Tab A, etc.). This kit includes an expandable drill base wall mount, screws and four tablet mounts. | GREAT FOR BUSINESS OR PERSONAL USE - Works with most smooth surfaces, perfect for wall mounting and the Pole expands from 17.5” tall to 28.5” long. The TabDock Point of Purchase is great for business, homes, point of sale location, kiosk stands, displays. | ADJUSTABLE - Each tablet holder rotates 360 degrees for optimal viewing positions. Tablets and the pole can be mounted in a vertical or horizontal position. Insert Tablet into holders horizontally and then rotate to desired viewing position. Clamps your tablet in a secure hold, but is easy to remove as needed.