◀ Specification ▶ This balanced 1/4inch to 3pin XLR Male cable is 10FT long. The wire is nylon braided, it's strong and heavy duty. 1/4inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission. | ◀ Noise Free ▶ This TRS to XLR male cable is full covered with spiral OFC(oxygen free copper) inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI. | ◀ Not Use for Guitar ▶ This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 1/4" instrument jack, but not XLR jack. 1/4inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc. | ◀ Package Items ▶ The package include two 6.35mm to XLR male cable, each cable is 10 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake. | ◀ 2-year Warranty ▶ Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed.

◀ Specification ▶ This balanced 1/4inch to 3pin XLR female cable is 3.3FT long. The wire is nylon braided, it's strong and heavy duty. 1/4inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission. | ◀ Noise Free ▶ This TRS to XLR female cable is full covered with spiral OFC(oxygen free copper) inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI. | ◀ Package Items ▶ The package include two 6.35mm to XLR female cable, each cable is 3.3 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake. | ◀ Applications ▶ This quarter inch to XLR female cable is usually used to transmit XLR output signal to mixer, audio interface, speaker, studio monitor, preamp and others that has balanced 1/4 inch input jack. | ◀ 2-year Warranty ▶ Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed.

◀ Specification ▶ This balanced 1/4inch to 3pin XLR Male cable is 3.3FT long. The wire is nylon braided, it's strong and heavy duty. 1/4inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission. | ◀ Noise Free ▶ This TRS to XLR male cable is full covered with spiral OFC(oxygen free copper) inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI. | ◀ Not Use for Guitar ▶ This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 1/4" instrument jack, but not XLR jack. 1/4inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc. | ◀ Package Items ▶ The package include two 6.35mm to XLR male cable, each cable is 3.3 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake. | ◀ 2-year Warranty ▶ Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed.

◀ Specification ▶ This balanced 1/4inch to 3pin XLR Male cable is 6.6FT long. The wire is nylon braided, it's strong and heavy duty. 1/4inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission. | ◀ Noise Free ▶ This TRS to XLR male cable is full covered with spiral OFC(oxygen free copper) inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI. | ◀ Not Use for Guitar ▶ This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 1/4" instrument jack, but not XLR jack. 1/4inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc. | ◀ Package Items ▶ The package include two 6.35mm to XLR male cable, each cable is 6.6 feet long. One cable has red rings and the other has blue rings, with different color rings, you will not insert the connector into wrong jack by mistake. | ◀ 2-year Warranty ▶ Each cable will be tested carefully before packing. We offer 2-year warranty for each of them. If the cable meet any problem within the warranty, you don't have to wait for long for return and repair. We'll arrange new cable for replacement once the issue confirmed.

◀ TS XLR female cable ▶ Unbalanced 1/4inch to XLR female cable is used to output XLR microphone signal to audio equipment with 1/4" MIC jack. This microphone cable is mostly used on karaoke machine, powered speakers, home studio, DJ mixing console, etc. | ◀ Important notification ▶ Please do not use this cable to link a wired microphone to a 1/4" LINE IN Jack. Due to mis-match impedance issue, the LINE IN jack won't receive clear signal. | ◀ Specification ▶ This unbalanced 6.35mm to XLR female cable is 10 feet long. The wire is nylon braided, it's super strong and heavy duty. The cable is thick but will give a flexible feeling. The core conductor is full covered with spiral OFC (free oxygen copper), under this OFC layer there is also an aluminum foil layer. This two layter can protect the cable from the environmental interference. The 1/4" connector is gold plated design, it can reduce signal distortion. | ◀ 10feet, 2Pack ▶ Package will come with two mono 1-4" to XLR female cable. One is with red ring, the other is with blue ring. Different ring color can help you to insert the plug into right jacks. Please also carefully check if this length is suitable for your connection. | ◀ Customer Support ▶ We provide two years warranty for this cable. If you meet any problem before the deadtime, you can contact us for assistance. Our team member will give response within 12 hours.