🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Grey is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite 3D print ABS Grey is a good choice for functional parts that require durability or high temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Grey( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV resistant feature, we recommed our UV resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Grey ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with dessicant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 3D filament ABS 1.75 requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and odor when printed is stronger than with PLA. Using raft or brim or reduce the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Orange is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite 3D print ABS Orange is a good choice for functional parts that require durability or high temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Orange( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV resistant feature, we recommed our UV resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Orange ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with dessicant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 3D printing filament ABS requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and odor when printed is stronger than with PLA. Using raft or brim or reduce the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Teal is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite 3D print ABS Teal is a good choice for functional parts that require durability or high temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Teal( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV resistant feature, we recommed our UV resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Teal ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with dessicant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. ABS filament 1.75 requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and odor when printed is stronger than with PLA. Using raft or brim or reduce the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm White is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite 3D print ABS White is a good choice for functional parts that require durability or high temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament White( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV resistant feature, we recommed our UV resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker White ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with dessicant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 1.75 filament ABS requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and odor when printed is stronger than with PLA. Using raft or brim or reduce the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Army Brown is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Army Brown Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Army Brown ASA filament 1.75mm ( similar to Army Brown ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Army Green is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Army Green Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Army Green ASA filament 1.75mm ( similar to Army Green ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Black is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Black Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Black ASA filament 1.75mm ( similar to Black ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Blue is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Blue Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Blue ASA filament 1.75mm ( similar to Blue ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant ASA Filament Pack】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistant and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside applications such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA bundle is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and of high quality. (Matter surface than regular 3D ABS Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: ASA filament bundle of 2 (Black+White) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm environment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant ASA Filament Pack】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistant and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside applications such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA bundle is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and of high quality. (Matter surface than regular 3D ABS Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: ASA filament bundle of 2 (Black*2) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm environment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Dark Grey is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Dark Grey Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Dark Grey ASA filament 1.75mm ( similar to Dark Grey ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS and is weather resistant. Our ASA is UV resistant and resistant to environmental stress cracking. PolyLite ASA is perfect for outdoor applications such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Grey is a 3D filament ASA with a special matte finish that makes the final print look very smooth and of high quality. (Matter surface than regular 3D ABS Grey Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Grey ASA filament 1.75mm ( similar to Grey ABS filament 1.75mm ) | 🌕 【ASA 5kg Roll】 - 5kg ASA filament 1.75mm, enough for your big project, more budget-friendly and efficient | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm environment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Natural is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Natural Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Natural ASA filament 1.75mm ( similar to Natural ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Orange is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Orange Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Orange ASA filament 1.75mm ( similar to Orange ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Purple is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Purple Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Purple ASA filament 1.75mm ( similar to Purple ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Red is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Red Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Red ASA filament 1.75mm ( similar to Red ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS and is weather resistant. Our ASA is UV resistant and resistant to environmental stress cracking. PolyLite ASA is perfect for outdoor applications such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA teal is a 3D filament ASA with a special matte finish that makes the final print look very smooth and of high quality. (Matter surface than regular 3D ABS teal Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: teal ASA filament 1.75mm ( similar to teal ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm environment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA White is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS White Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: White ASA filament 1.75mm ( similar to White ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

✨ 【Dual Color Silk PLA】 - This dual-color PLA silk filament contains 2 beautiful colors (Lime-Magenta) for its left and right half, and the colors are chosen carefully by us to make it looks amazing when put together. The print looks very shiny and the colors transit smoothly. Perfect for printing some metal feel prints, anime figures, Christmas decoration pieces, gift prints, and festival ornaments | 🧵 【Tangle Free & Moisture Free】 - PolyLite Dual Color Silk Lime-Magenta 1.75 PLA filament is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Good Layer Adhesion】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite Two Color Silk Lime-Magenta PLA filament 1.75mm is a worry-free 3D printing filament that has great bed adhesion, very consistent color, and dimensional accuracy 【Note - turn off the fan for the first layer for improved bed adhesion】 | ♻️ 【Cardboard Spool】 - This Two Color Lime-Magenta PLA silk filament comes in upgraded 3.0 version packaging with a fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 210~240˚C; Bed: 50˚C; Speed: 60mm/s. 【Please use higher printing temperature to 230~240 °C and flow rate to avoid clogs】 ( Silk PLA Filament Two Tone Lime-Magenta ) | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🔮 【Matte Finish】 - PolyTerra PLA is a PLA filament 1.75 featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Brown PLA filament 1.75mm ( PLA Brown Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Dark Brown is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Eco-Friendly】 - PolyTerra PLA is a material made from greenhouse gases and comes in a fully recycled cardboard packaging | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s | ⚠️ 【IMPORTANT NOTE】 - Please make sure to double check the diameter of your order as it may automatically change when selecting a color. Selected diameter: PolyTerra PLA filament 1.75mm Brown ( PLA filament Chocolate Brown )

🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Galaxy Orange is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Galaxy Orange 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Galaxy Orange ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Galaxy Orange ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with desiccant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Our Polymaker ABS 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and the odor when printed is stronger than with PLA. Using a raft or brim or reducing the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength ( Selected Color: 3D filament ABS balck ) | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⚠️ 【Nozzle Note】 - To avoid clogging the nozzle 0.6mm or larger diameter nozzle is necessary for printing galaxy filament | 🌌 【Galaxy Shiny PLA】 - Our Polymaker PLA glitter 3D printer filament contains a special shiny metal raw material that reflects light like the shiny stars in the galaxy. It can also be a Blue marble PLA to print stone effect print | 🧵 【Tangle Free & Moisture Free】 - PolyLite sparkle PLA filament 1.75mm is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite glittery 1.75 PLA filament is a worry-free product that has great bed adhesion, very consistent color, and dimensional accuracy. It is more rigid than almost all the competitive 3D printing filaments such as PLA+ filament 1.75mm | ♻️ 【Cardboard Spool】 - PolyLite galaxy filament PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundBlues of thousands of Polymaker customers | ⚙️ 【Printing Settings】 - Nozzle: 190~230˚C, Bed: 25~60 ˚C, Speed: 40~60 mm/s. Selected color: PolyLite 3D filament glitter PLA Galaxy Dark Blue | 🛡️ 【Lifetime Warranty】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🐊 【Matte Finish Army Series】 - PolyTerra PLA is a 1.75 filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra Army Series are specially developed for military enthusiasts, which include army light green and dark green, army blue, army red, army brown and army beige. You can creat tanks, military caps, soldiers, military vehicles and camouflage prints, back to army life and enjoy with Polymaker army 3D filaments | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament 1.75mm (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Army Dark Green is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Army Military Green ( PLA filament Olive Green ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Black PLA filament 1.75mm ( PLA Black Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Black is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament Black ( PLA filament Black ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Cappuccino PLA filament 1.75mm ( PLA Cappuccino Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Black is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament Cappuccino ( PLA filament Cappuccino ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 1.75 mm filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Grey PLA filament 1.75mm ( PLA Grey Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Grey is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Grey ( PLA filament Grey ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra 1.75mm PLA is a 3D printer filament 1.75mm featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Orange PLA filament 1.75mm ( PLA Orange Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA + (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Orange is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Orange ( PLA filament Orange ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a PLA 3D printer filament featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Sakura Pink PLA filament 1.75mm ( PLA Sakura Pink Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament 1.75mm (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Sakura Pink is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Sakura Pink ( PLA filament Sakura Pink ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 1.75 PLA filament featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Red PLA filament 1.75mm ( PLA Red Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA pro (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Red is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Red ( PLA filament Red ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: White PLA filament 1.75mm ( PLA White Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA, perfect for printing some anime figures, daily decorations, bone models, lithophanes light, and so on | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament White is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament White ( PLA filament White ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printer filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Yellow PLA filament 1.75mm ( PLA Yellow Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA plus filament 1.75 (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Yellow is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Yellow ( PLA filament Yellow ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

PolyLite ABS Neon is a new series that have 4 florescent colors: Magenta, Orange, Yellow and Green. Fluorescent colors appear intense in daylight and becomes visible to a black light in the dark (UV light) | 🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Neon Magenta is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Neon Magenta 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Neon Magenta ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Neon Magenta ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with desiccant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Our Polymaker ABS 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and the odor when printed is stronger than with PLA. Using a raft or brim or reducing the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

PolyLite ABS Neon is a new series that have 4 florescent colors: Magenta, Orange, Yellow and Green. Fluorescent colors appear intense in daylight and becomes visible to a black light in the dark (UV light) | 🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Neon Yellow is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Neon Yellow 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Neon Yellow ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Neon Yellow ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with desiccant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Our Polymaker ABS 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and the odor when printed is stronger than with PLA. Using a raft or brim or reducing the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

😀 【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG 3D printer filament is designed for your special inventions and strong gadgets. PETG features 80˚C (144˚F) heat resistance and higher toughness than regular PLA | 🧵 【Tangle Free & Moisture Free】 - PolyLite PETG 1.75mm is carefully winded to avoid any tangling issues, dried, and vacuum-sealed in a resealable ziplock bag with desiccant. Buy in bulk and save more | 🛠️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG bundle is a worry-free 3D Printer Filament that has great bed adhesion, very consistent color, and dimensional accuracy【Note - turn off the fan for the first layer for improved bed adhesion】 | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 235˚C; Bed: 70˚C; Speed: 60mm/s (Selected color: 1.75mm PETG filament bundle of 2 - 2*Black) | 🛡️ 【 Risk-Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. This PETG is designed to be an all-rounder 3D Printer Consumables. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

😀 【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG is designed for your special inventions and strong gadgets. PETG features 80˚C (144˚F) heat resistance and a higher toughness than regular PLA Selected color: Clear PETG filament 1.75mm ( PETG Clear Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyLite PETG is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue | 🛠️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG is a worry-free 3D Printer Filament Clear which has great bed adhesion, very consistent color and dimensional accuracy.【Note - turn off the fan for the first layer for improved bed adhesion】 | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙ 【Printing Settings】 - Nozzle: 235˚C; Bed: 70˚C; Speed: 60mm/s | 🛡️ 【Risk Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. This PETG is designed to be an all rounder 3D Printer Consumables. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

😀 【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG is designed for your special inventions and strong gadgets. PETG features 80˚C (144˚F) heat resistance and a higher toughness than regular PLA Selected color: Green PETG filament 1.75mm ( PETG Green Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyLite PETG is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue | 🛠️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG is a worry-free 3D Printer Filament Green which has great bed adhesion, very consistent color and dimensional accuracy.【Note - turn off the fan for the first layer for improved bed adhesion】 | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙ 【Printing Settings】 - Nozzle: 235˚C; Bed: 70˚C; Speed: 60mm/s | 🛡️ 【Risk Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. This PETG is designed to be an all rounder 3D Printer Consumables. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

😀 【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG is designed for your special inventions and strong gadgets. PETG features 80˚C (144˚F) heat resistance and a higher toughness than regular PLA Selected color: Teal PETG filament 1.75mm ( PETG Teal Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyLite PETG is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue | 🛠️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG is a worry-free 3D Printer Filament Teal which has great bed adhesion, very consistent color and dimensional accuracy.【Note - turn off the fan for the first layer for improved bed adhesion】 | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙ 【Printing Settings】 - Nozzle: 235˚C; Bed: 70˚C; Speed: 60mm/s | 🛡️ 【Risk Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. This PETG is designed to be an all rounder 3D Printer Consumables. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need