PLA silk rainbow 1.75mm, automatic color change by machine ,3 colors,purple red,green,blue and colors between them, 17 meters each color; | High-quality PLA rainbow, manual color change, color change red, orange, yellow, green, blue, purple and transition colors between the two colors, theoretically each color lasts 5-9 meters in length ,can be used in all kinds of FDM 3D printers, director extrusion or Bowden extruder. Printing smoothly, no jam, no warp, no cracking, no bad smell. | The surface of the material has a very bright color, as smooth as silk, layer strips invisible. | It is suggested that the nozzle should be used at a temperature of 195-215 ℃. If hairy when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃ | The cooling speed of silk materials is faster than that of ordinary PLA, so the machine can be adjusted slightly, such as the distance between raft and body, the distance between support and body, moving and cooling speed, etc

PLA silk rainbow 1.75mm, automatic color change in single extruder, 5 colors,purple red,red,yellow, green,blue and colors between them, 15 meters each color; | High-quality PLA rainbow, manual color change, color change red, orange, yellow, green, blue, purple and transition colors between the two colors, theoretically each color lasts 5-9 meters in length ,can be used in all kinds of FDM 3D printers, director extrusion or Bowden extruder. Printing smoothly, no jam, no warp, no cracking, no bad smell. | The surface of the material has a very bright color, as smooth as silk, layer strips invisible.PLA raw material is imported from European, no recycled material or reworks material, stable diameter control and no jam | It is suggested that the nozzle should be used at a temperature of 195-215 ℃. If hairy when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃ | The cooling speed of silk materials is faster than that of ordinary PLA, so the machine can be adjusted slightly, such as the distance between raft and body, the distance between support and body, moving and cooling speed, etc

PLA vertigo galaxy multicolors,pla multicolors filament 1.75mm.PLA filament 1.75mm,the glitter produced by the unique surface suspension technology has a strong flickering effect and evenly covers surface. The glitter is only as small as 0.050mm, but the commonly used particle size on the market is bigger as 0.1-0.2mm, our filament with very small chance to block the nozzle | PLA raw material is imported from European, no recycled material or reworks material, stable diameter control and no jam | It is suggested that the nozzle should be used at a temperature of 195-215 ℃. If hairy occur when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃ | Layer heigh 0.2mm or bigger .We suggest 0.2mm or bigger layer height ,bigger nozzle will be better. It is the same as normal PLA formulation, just print with standard PLA parameter setting.

Luxy mirror chrome powder fill pure pla, blue / purple throw luster, color change from different angle, the shiny side is top ,bigger layer height better result. | The glitter created by the unique surface suspension technology has a strong flicker effect and covers the surface evenly. The glitter is only as small as 0.020mm, but the particle size commonly used in the market is larger than 0.1-0.2mm. Our filament has very little chance of blocking the nozzle | Printing Tips: Recommend heat bed 50-60 ° C, Recommend printing temperature: 195-220 ° C, To avoid tangling, insert filament into spool holes to fix after each use, don't intend to bend the filament when you do this Find out that the filament breaks while printing. Contact us. We give support to show how you can improve and avoid it. | Better flow, no clogging premium 1.75mm PLA filament. It has a constant diameter and a uniform roundness, fewer threads and warps, and strong layer adhesion. Item-free and free from contamination. No contamination, no clogging, vacuum packing with zipper bag, net weight 1kg / spool | 100% satisfaction guarantee: response within 24 hours, 100% satisfaction guarantee. If for any reason you are not completely satisfied, contact us and we will help you return and refund

Luxury mirror chrome powder fill pure pla, most fantastic magic filament,sparkling with green/blue shiny sparkling glitter flakes, color change from different angle, the most shiny side is on top ,bigger layer height better result. | PLA filament 1.75mm, the glitter created by the unique surface suspension technology and strong flicker effect and covers the surface evenly. The particle size commonly used in the market is larger than 0.2mm,our glitter is only as small as 0.02mm,smaller and free jamming,shiny as well . | Printing Tips: recommend heatbed 50-60 ℃, nozzle temperature: 190-215 ℃, speed 23-45mm/s,to avoid tangling, insert filament into spool holes to fix after each use.To achieve best sparkling result,the filament is not good tough enough for your intend bending . | Better flow, no clogging ,premium 1.75mm PLA filament. It has a constant diameter and a uniform roundness, strong layer adhesion,without knots ,warps . Impurities-free , no clogging, vacuum packing with zipper bag, net weight 1kg / spool | 100% satisfaction guarantee: response within 24 hours, 100% satisfaction guarantee. If for any reason you are not completely satisfied, contact us and we will help you return and refund.

Unique product design, 2 different formula effects in one filament, silk and glitter effects, black, red, purple,,silky smooth surface and glitter starly sparkling | PLA silk and pla glitter galaxy effect ,the finished 3D printed Item perfect for arts, crafts, DIY, etc.Compliant for many 3d printers | Printing tips: recommend heat bed 50-60°C, nozzle: 195-215°C, speed 25-50mm/s,rectration length 3-5mm,rectration speed 40-50mm/s,support flow 70%,support Z top distance 0.6mm | Better flow ,premium 1.75mm PLA filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package with zipper Bag, net weight 1KG/Spool | 100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you

Strong metal texture, with silky smooth surface and glitter starly sparkling | PLA silk gold and pla glitter galaxy red effect ,the finished 3D printed Item perfect for arts, crafts, DIY, etc.Compliant for many 3d printers | Printing tips: recommend heat ned 50-60°C, nozzle: 195-220°C, speed 25-50mm/s,rectration length 3-5mm,rectration speed 40-50mm/s | Better flow ,premium 1.75mm PLA filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package with zipper Bag, net weight 1KG/Spool | 100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you

Strong metal texture, with silky smooth surface and glitter starly sparkling | PLA silk and glitter galaxy effect ,the finished 3D printed Item perfect for arts, crafts, DIY, etc.Compliant for many 3d printers | Printing tips: recommend heat ned 50-60°C, nozzle: 195-220°C, speed 25-50mm/s,rectration length 3-5mm,rectration speed 40-50mm/s | Better flow ,premium 1.75mm PLA filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package with zipper Bag, net weight 1KG/Spool | 100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you

PLA glow in dark filament,much bright in the night and long glow time. There are two colors green and blue appearing alternately and the transition color between them,colors change fast | Note that in order to achieve the best luminous effect, any added additives (such as toughening agents) may cause the luminous effect to decline and the filament to be less tough. Attention should be paid to the printing process. | PLA filament printing Tips: Recommend the heat bed 50-60 ° C, nozzle temperature: 195-220 ° C, to avoid tangling, insert the filament into the spool holes to fix it after each use. If you find that the filament breaks while printing, please contact us. We'll show you how to improve it and avoid it. | Better flow, no clogging premium 1.75mm PLA filament. It has a constant diameter and a uniform roundness, fewer threads and warps and a strong layer adhesion. Item-free and free from contamination. No contamination, no clogging, vacuum packing with zipper bag, net weight 1kg / spool | 100% satisfaction guarantee: response within 24 hours, 100% satisfaction guarantee. If for any reason you are not completely satisfied, contact us and we will help you return and refund

🚗 IDEAL SIGNAGE FOR: All kinds of vehicles which will be used by beginner drivers. The student driver magnet promotes AWARENESS and car SAFETY which is in line with the US Department of Transportation guidelines for warning signs to best alert motorists around you that you are a 1st time rookie driver, to drive with caution and to please be patient. | 🚗 HIGHLY REFLECTIVE & VISIBLE: As Always, SAFETY FIRST! Our large student driver signs are bright yellow making them highly visible but, better yet they are also REFLECTIVE making them luminous at night when in the line of nearby headlights. | 🚗 GUARANTEED TO STAY ON: The removable sign is both durable and robust ensuring it can withstand the test of time and all weather conditions. The strong MAGNETIC backing on the bumper sticker also ensures the sign will not peel or slip off your car whilst driving or in the cold weather. Please note magnetic signs only stick to metallic surfaces only. They do not stick to fiberglass, aluminum, plastic, carbon fiber or windows. | 🚗 EASE OF USE AND LOW MAINTENANCE: Firstly, clean down the area where the learner driver sign will be applied ensuring it is free from dust and dirt. Apply the magnet firmly and evenly ensuring there is no air pockets between it and the car surface. For maximum visibility apply one sign to the back exterior of the automotive and one to a door on either side of the car. | 🚗 LIFETIME WARRANTY: TEST THEM AND YOU WILL LOVE THEM. If for any reason you don’t we offer a replacement for free at any time, no questions asked + 30 day money back guarantee. Lastly, enjoy the Student Driver, Thanks For Your Patience Magnets, safe driving and thank you for choosing Assured Signs.

Alpha acid content: low | Flavor/aroma: hoppy, pleasant | Origin: Slovenia | Format: pellet | Use: aroma/flavor

Alpha acid content: low | Flavor/aroma: hoppy, pleasant | Origin: Slovenia | Format: pellet | Use: aroma/flavor

Alpha acid content: low | Flavor/aroma: hoppy, pleasant | Origin: Slovenia | Format: pellet | Use: aroma/flavor

❶【Perfect for Desktop】: Mini size saves table space which is widely applied to the tabletop. | ❷【Wide Application】: Ideal for office table, bathroom vanity countertop, laundry room, and more. | ❸【Easy to Use and Clean】: The internal and external layered design help to clean efficiently. | ❹【Mini Size】: 8.3" x 3.5" X 5.9", 0.4 Gal | ❺【Hidden Bag Design】: Hidden trash bag design keeps your countertop neat.

❶【Desktop Wastebasket 】: The small size makes it not take up spaces. Perfect for putting on the office tabletop, Bathroom Vanity Countertop, and many other desktop places. | ❷【Hide Trash Bags to Keep Tidy】: It hides trash bags so it always keeps your countertop neat. The mini design and simple color can make the desktop tidy and beautiful. | ❸ 【Easy to Use and Clean】: The lid clicks open and closed very easily with a fingertip. The outer surface is "matte" while the inside is smooth for easy cleaning. | ❹【Mini Size】: 8.6" x 4.3" X 5.1", 0.4 Gal | ❺【Risk-free Purchase】: We do value our customers and hope you will enjoy the pleasant shopping experience. If there is any problem with our products, please contact us via E-mail without hesitation and we will solve the problem as soon as possible.

Sufficient quantity: you will get 12 pieces suction cups with screws and 12 pieces suction cup threaded, 24 pieces in total, enough quantity to meet your daily use; Each clear suction cup measures 2.09 inches in diameter, the proper size for you to use | Lightweight and reliable: the suction cup with cap is made of PVC and a metal cap nut, lightweight and reliable to use, not easy to break and with a nice bearing capacity, providing you with a wonderful experience | Multi purpose: clear suction cups can apply to clean, flat, non porous surfaces such as windows, mirrors, fiberglass and metal, which are good helper for kitchens, offices, bathrooms and other places, bringing you a pretty convenience | Reusable to use: if you want to move or change your items to other places, you can directly tilt up the wall suction cup with a knife and install it at the position you want to install; Suitable for hanging various items | Powerful suction: these threaded suction cups have a nice suction, which is widely applied in furniture, bathroom, kitchen, bedroom, office, home appliances and so on; Note: make sure the surface is clean before sticking to the sucker

【Package Included】: 30PCS x Plastic Plugs Locking. NOTE: Please refer to the reminder of the size chart before buying. (Refer the Size Picture). | 【Product Feature】: Bottom Diameter: 25mm / 1", Cap Diameter: 30mm / 1.18", Height: 10mm / 3/8", Fit Hole diameter: 25mm. | 【Premium Material】: Plugs Panel Hole is made of high quality material, light weight, wear-resistant and durable. | 【Application】Locking Hole Plugs are suitable for steel furniture, table and chair legs, reserved holes in the cabinet and electric box, outdoor equipment etc. Great plastic hole plugs to cover, conceal and decorate holes. | 【100% SATISFACTION GUARANTEED】If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products.

【Package Included】: 30PCS x Plastic Hole Plugs. NOTE: Please refer to the reminder of the size chart before buying. (Refer the Size Picture). | 【Product Feature】: Bottom Diameter: 6mm / 1/4", Cap Diameter: 8mm /5/16", Height: 6mm / 1/4", Fit Hole diameter: 5.5-6mm. | 【Premium Material】: Plugs Panel Hole is made of high quality material, light weight, wear-resistant and durable. | 【Application】Locking Hole Plugs are suitable for steel furniture, table and chair legs, reserved holes in the cabinet and electric box, outdoor equipment etc. Great plastic hole plugs to cover, conceal and decorate holes. | 【100% SATISFACTION GUARANTEED】-- If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products.

【Package Included】: 30PCS x 5/16" Plastic Hole Plugs. NOTE: Please refer to the reminder of the size chart before buying. (Refer the Size Picture). | 【Product Feature】: Bottom Diameter: 8mm / 5/16", Cap Diameter: 11mm / 7/16", Height: 8mm / 5/16", Fit Hole diameter: 7.5-8mm. | 【Premium Material】: Plugs Panel Hole is made of high quality material, light weight, wear-resistant and durable. | 【Application】Locking Hole Plugs are suitable for steel furniture, table and chair legs, reserved holes in the cabinet and electric box, outdoor equipment etc. Great plastic hole plugs to cover, conceal and decorate holes. | 【100% SATISFACTION GUARANTEED】-- If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products.

【Package Included】: 4PCS x Round Plastic Plugs. NOTE: Please refer to the reminder of the size chart before buying. (Refer the Size Picture). | 【Product Feature】: Fits 50mm (2 Inch) OD round tubing outside diameter rectangle tubing (not hole size). Designed to fit inside hole diameters (ID) from 1.75'' - 1.88" (1 3/4" to 1 7/8"), with a wall thickness 9-17 Ga. | 【Premium Material】: Plastics black ribbed plugs are made of high quality black LD polyethylene, great for preventing scuffs on wood floor or as protection glides on bench feet, bar stool foot. | 【Application】: Black Tube Inserts serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any sqaure opening. | 【100% SATISFACTION GUARANTEED】: If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products.

➽STRONGEST MAGNETS: The student driver car magnet is made of 0.7mm thick strong magnet. Compared with other magnets, it is thicker, stronger, more durable and be patient student driver magnet can be more firmly attached to the surface of the car, we have tested for a long time at high speed, heavy rain and snow and never fall off. Tip: Magnets can only be attached to metal surfaces, not to plastic or aluminum parts. | ➽HIGHLY REFLECTIVITY: New driver magnet for car is made of high quality waterproof and heat resistant materials through strong magnetic and highly reflective materials to maximize the amount of light reflected from the sign, attracting people's attention and ensuring that the rookie driver car magnet is clearly visible even at night, in fog and rain, and other drivers can notice you from the side and back of the car. An excellent tool for teens with no driving experience. | ➽Unique design: New driver sticker signs will be displayed humorously and can make others aware that you are learning to drive, then they will be tolerant of providing you with more space and respect and reduce the possibility of annoying honking while controlling the speed of their car to prevent an accident. Student driver magnet also can reduce the level of nervousness teen driver feel when driving. | ➽Removable and Reusable: Student driver signs for car removable, easily removable or transferable thanks to the magnetized backing. All driver magnets can be removed and reattached anytime. You can easily transfer it to another car when it is needed. Perfect as a gift for your family, colleagues, friends during various holidays, parties, birthdays | ➽100% Satisfaction Guarantee: We are dedicated to providing the best quality new driver sticker for car to our customers. If you are in any way dissatisfied with our please be patient student driver magnet, please contact us and we will do our best to provide you a satisfactory reply.

【Strong Adhesion】: All-in-one Picture hanging strips are backed with high quality upgraded adhesive backing, compared with ordinary double-sided adhesive, stronger adhesion, not easy to fall off and shake.Can hold up to 13.2 lb,suitable for most sizes of photo frames. | 【Removes quickly and cleanly】: To remove the universal hook and loop strips, simply hold the top of the removable tape and pull it slowly and straight toward the ground. There will be no residue on the flat surface for perfect removal. | 【Damage-free】: The flat surface of used wall strips will not be damaged after removal, leaving no holes, marks or sticky residue, and will not prevent the flat surface from being used again. Perfect choice for renovating or organizing your space. | 【Works on most smooth surfaces】: Wall hanging strips work on a variety of smooth surfaces, including tile, glass, marble, metal, wood, and plastic. Not suitable for wet or rough surfaces. | 【Easy to use】: Clean the surface first and keep it dry when using. Stick two picture hanging strips together, then stick the strips to your target object, finally stick to the flat surface, press firmly and it will work properly. | 【After-sales service】: Summerbrite provides you with 24 hours online customer service, any questions, please contact us.

【Strong Adhesion】: All-in-one Picture hanging strips are backed with high quality upgraded adhesive backing, compared with ordinary double-sided adhesive, stronger adhesion, not easy to fall off and shake.Can hold up to 13.2 lb,suitable for most sizes of photo frames. | 【Removes quickly and cleanly】: To remove the universal hook and loop strips, simply hold the top of the removable tape and pull it slowly and straight toward the ground. There will be no residue on the flat surface for perfect removal. | 【Damage-free】: The flat surface of used wall strips will not be damaged after removal, leaving no holes, marks or sticky residue, and will not prevent the flat surface from being used again. Perfect choice for renovating or organizing your space. | 【Works on most smooth surfaces】: Wall hanging strips work on a variety of smooth surfaces, including tile, glass, marble, metal, wood, and plastic. Not suitable for wet or rough surfaces. | 【Easy to use】: Clean the surface first and keep it dry when using. Stick two picture hanging strips together, then stick the strips to your target object, finally stick to the flat surface, press firmly and it will work properly. | 【After-sales service】: Summerbrite provides you with 24 hours online customer service, any questions, please contact us.

Alpha acid content: high | Flavor/aroma: citrus, spicy, herbal | Origin: American | Format: pellet | Use: bittering

The max wide that alligator clips open is 0.4"/10mm. Voltage: 1500V; Current:15A. 38.2 inches wire with nice rubber insulation cover and the alligator clips made of copper. The clips make it easier to grasp the battery you are trying to read, allows hands-free testing, great for remote spaces. | The wide for alligator test clips robust enough to be useful for testing circuits on your vintage cars, trucks and motorcycle, etc | This really is a great set of Jumper or Tester wires. High quality thick cables. Excellent leads that can be used to do a variety of electronic testing. It will works as intended in conducting electricity! | These are good sturdy leads with thick wire and nice clips. The clips had insulators to reduce the possibility of accidental shorting. Good quality leads that work great for moderate to low current testing. These wire are good for up to 15 amps maximum. They are fine for basic electrical testing for things like automotive accessories, as long as whatever you are testing uses a fuse of 15 amps or smaller. | An absolute necessary tool when you need a third hand or have to test many circuits sequentially. These are high quality test leads for moderate electrical testing. Sturdy clips and tight ends. Can't see the cables strands.

【DURABLE】: High grade brass construction for corrosion resistance, high temperature ductility and low magnetic permeability, 3/8”barb X 3/8”NPT male pipe, 12 pack | 【FIRM】: High strength, high hardness premium solid brass of a longer service life with thick wall, more durable than iron and iron galvanized pipe fittings, not a cast product | 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection | 【FUNCTION】: This pipe fitting can apply to water, gas, oil and fuel especially for hoses | 【TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F)

【DO YOU KNOW THIS?】Do you know the difference between 'inch' and 'NPT thread size of pipe fitting'? Do you know these are two completely different units of measurement? | 【CHECK SIZE IN 1 MINUTE】If you're not sure whether the size of our fitting meet your needs, please first check size according to the method in main diagram before purchase! | 【SAFE TO USE】SUNGATOR 3/8'' female to 1/4'' male reducer meet specifications ASTM B584 and ASME/ANSI B16. These brass pipe fittings can withstand rated up to 212°F/300 PSI and long period of wear and tear. | 【VERSATILE APPLICATIONS】The pipe adapters provide solution as pipe extension to the shower head, tub spout, spigot water, plumbing line etc, and also these 3/8'' to 1/4'' reducer adapters can be used with grease, fuels and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. | 【LONG LASTING】Brass 3/8'' to 1/4'' npt reducer are more resistant than iron and iron galvanized pipe fittings as our plumbing pipe adapters are made of premium solid brass in prevention and protection of fittings against abrasion, corrosion, scratches, dulling and other damage after use.

【Package Includes】: 1/2" Pex B Fittings Set includes 6pcs PEX 1/2" x 1/2" NPT Female Threaded Adapter | 【Non-Pollution】: Lead free brass pex female adapter 1/2", comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified. | 【Extra-Long Service Life】: High-quality brass pex fittings, resists corrosion, rust and high temperature (32℉-200℉). | 【Applications】: This brass crimp 1/2 inch Pex fittings Set can be used only for PEX B pipes in plumbing jobs. Great for hot or cold water distribution and and hydronic heating systems in your home, in warehouse or in RV. But NOT UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE. | 【Compatible Products】: Pex Fittings 1/2 inch Set use with Stainless Steel Clamp Rings or PEX Crimp Copper Rings. (Clamp rings are not included in this set.) | 【Warm Tips】: NOT Compatible with UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE. ONLY for PEX B pipes.

【Package Includes】: Pex B Fittings Set includes 25pcs 1/2" PEX Elbows | 【Non-Pollution】: Pex Elbows 1/2 inch Set is Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified. | 【Extra-Long Service Life】: High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32℉-200℉). | 【Applications】: 90 degree elbow 1/2" Pex fittings can be used for PEX B pipes in plumbing jobs. ONLY for PEX B pipes. Great for hot or cold water distribution and and hydronic heating systems in your home, in warehouse or in RV. But NOT UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE. | 【Compatible Products】: 1/2 inch Pex Fittings use with Stainless Steel Clamp Rings or PEX Crimp Copper Rings. (Clamp rings are not included in this set.) | 【Warm Tips】: NOT Compatible with UPONOR/Wirsbo EXPANSION SYSTEM & PB TUBE. ONLY for PEX B pipes.

【2kg in Total, 0.25kg per Spool, 8 Rolls of 0.25kg 1.75mm PLA+ Filament】8 rolls of 250g SUNLU 1.75mm PLA plus filament. Color: Black+White+Grey+Blue+Green+Red+Orange+PureYellow. The design of 250g PLA+ filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users. | 🎅【Small Spool Diameter】- Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament mini spool is suitable for hanging on a lot of FDM 3D printers. | 🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. | 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. | 🎅【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). | 🎄【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

【SUNLU 100% Wound Neatly 3D Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 【PLA Features & Matte Color】- SUNLU's newly upgraded Matte PLA Filament colors retain the original SUNLU PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models. | 【Stable Dimensional Tolerance】- SUNLU PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise. | 【Recommend Settings & Easy to operate】- We recommend printing the PLA Matte Filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s. The length of the filament can reach about 330 Meters. The operation is very simple and suitable for novices. | 【No Odor & No Bubbles】- SUNLU 3D Printer Filament are mainly made of corn starch, which is odorless when printing. Vacuum sealed, there is also a desiccant package, vacuum packaging to avoid dust and keep the filament dry.

🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. | 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. | 🎅【Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. | 🎄【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). | 🎅【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. | 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. | 🎅【Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. | 🎄【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). | 🎅【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. | 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. | 🎅【Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. | 🎄【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). | 🎅【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. | 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. | 🎅【Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. | 🎄【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F). | 🎅【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency. | 🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion. | 🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. | 🎅【Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers. | 🎄【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).

【2kg in Total, 8 Spools, 0.25kg PLA Filament, Multiple Color Choices】8 spools of 250g SUNLU 1.75mm PLA 3d printer filament. Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow. The design of 250g PLA filament is convenient for customers with multiple color needs. Especially for multi-nozzle 3d printer users and 3d pen users. | 【SUNLU Toughness-enhanced PLA Filament】SUNLU premium PLA 3d printer filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion. Recommended PLA filament extrusion/nozzle temperature 200-230℃. | 【High Precision +/- 0.02mm Tolerance PLA filament】1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy. | 【SUNLU 250G Spool Diameter】Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. | 【High Compatiblity & Vacuum Pack PLA Filament】Compatible with 99% FDM 3D printers (with heated beds) and 3D pen.Vacuum packed neatly arranged SUNLU PLA 3d printer filament, provide better printing result.Environmental protection,250g PLA filament is made from starch raw materials derived from renewable plant resources. | 【Neatly Wound Filament 】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.

①【SUNLU PLA 3D Printer Filament】PLA material is the perfect choice for 3D printing enthusiasts! SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles, or tangles, its excellent layer adhesion ensures high-quality prints every time. Ideal for beginners and experienced users. | ②【Neatly Wound 3D Filament Spool】SUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience. | ③【PLA Filament 1.75 mm】SUNLU 3D printer filament dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. | ④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. | ⑤【PLA Recommend Settings】To achieve the best printing results with SUNLU PLA filament, we recommend printing at a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. | ⑥【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

①【SUNLU PLA 3D Printer Filament】PLA material is the perfect choice for 3D printing enthusiasts! SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles, or tangles, its excellent layer adhesion ensures high-quality prints every time. Ideal for beginners and experienced users. | ②【Neatly Wound 3D Filament Spool】SUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience. | ③【PLA Filament 1.75 mm】SUNLU 3D printer filament dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. | ④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. | ⑤【PLA Recommend Settings】To achieve the best printing results with SUNLU PLA filament, we recommend printing at a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. | ⑥【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

①【High Speed Printing PLA META Filament】SUNLU 1.75mm PLA Meta 3D printer filament(Tolerance Level : ± 0.02mm)smooth squeeze. PLA Meta filament is 1.5 times more fluid than regular PLA. Minimum tolerance and low warping to ensure consistent feeding and fast prints, say goodbye to clogging. SUNLU perfect dimensional accuracy +/-0.02mm provide optimum flow through the extruder nozzle. | ②【PLA META Filament Recommend Settings】High toughness and non-brittle PLA Meta filament printed parts can be sanded, drilled and painted. SUNLU PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground. PLA Meta filament Print nozzle temperature 185-195℃, Hot bed temp: 50°C-65°C, Print speed: 50-100mm/s, low printing temperature printing for greater energy efficiency. | ③【Glossy Surface & Good Adhesion】Brightly coloured PLA Meta 3d printer filaments bring glossy surface prints to arts, crafts and 3D projects. SUNLU PLA Meta filament 1.75mm has the advantages of high purity with good adhesion and superb layer bonding. | ④【Neatly Wound Filament 】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks. | ⑤【SUNLU 1KG Spool Diameter】Spool Diameter: 203.2mm(8inches), Spool Width: 63.5mm(2.5inches), Spool Hub Hole Diameter: 55.88mm(2.20inches). 1KG spool size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. | ⑥【High Compatiblity & Vacuum Pack PLA META Filament】Compatible with 99% FDM 3D printers (with heated beds) and 3D pen. Vacuum packed neatly arranged SUNLU PLA META 3d printer filament, provide better printing result.Environmental protection, 1KG PLA META filament is made from starch raw materials derived from renewable plant resources.