⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Natural is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Natural Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Natural ASA filament 1.75mm ( similar to Natural ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Orange is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Orange Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Orange ASA filament 1.75mm ( similar to Orange ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Purple is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Purple Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Purple ASA filament 1.75mm ( similar to Purple ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA Red is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Red Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Red ASA filament 1.75mm ( similar to Red ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS and is weather resistant. Our ASA is UV resistant and resistant to environmental stress cracking. PolyLite ASA is perfect for outdoor applications such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA teal is a 3D filament ASA with a special matte finish that makes the final print look very smooth and of high quality. (Matter surface than regular 3D ABS teal Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: teal ASA filament 1.75mm ( similar to teal ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm environment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⛅ 【Weather Resistant】 - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories | 🌡️ 【High Heat Resistance and Mechanical Properties】 - PolyLite ASA can resist temperatures up to 100˚C (212°F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS ) | 🔮 【Matte finish】 - PolyLite ASA White is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS White Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: White ASA filament 1.75mm ( similar to White ABS filament 1.75mm ) | ♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print. Using BuildTak or Magigoo can help with the bed adhesion | 🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Dark Green-Brown), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Dark Green-Brown Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Dark Green-Brown Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Grey-Orange), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Grey-Orange Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Grey-Orange Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Grey-Purple), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Grey-Purple Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Grey-Purple Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Ice-Blue), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Ice-Blue Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Ice-Blue Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🐼 【Dual Color Matte PLA】 - This dual-color PLA matte filament contains 2 beautiful colors (Gold-Rose) for its left and right half, and the colors are chosen carefully by us to make it looks amazing when put together. And it features an incredible matte surface finish that helps hide the layers of your print. Selected color: Dual Color Orange-black PLA filament 1.75mm ( PLA Dual Color Orange-black Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Dual Color Orange-black is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Pink-Red), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Pink-Red Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Pink-Red Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Red-Dark Blue), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Red-Dark Blue Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Red-Dark Blue Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🐼 【Dual-Color Matte PLA】 - Make your prints stand out with PolyTerra's dual-color matte PLA filament! This filament features 2 carefully chosen colors (Red-Yellow), creating a stunning look for your print when combined. Plus, the matte surface finish helps hide layer lines for a smooth appearance. Selected color: Coextrusion PLA Red-Yellow Filament 1.75mm | 🧵 【Say Goodbye to Tangles & Moisture】 - PolyTerra PLA Two Colors 3D Filament is carefully wound to avoid tangling and vacuum-sealed in a resealable ziplock bag with desiccant, ensuring moisture-free storage. Please remember to pass the filament through the fixed hole after use and put it back in the resealable bag to prevent tangling and moisture after use | 🛠️ 【Advanced Properties】 - PolyTerra Co-extruded 1.75 PLA filament has good ductility, making it less brittle than other PLA 3D Printer Filaments. This means your prints will be less likely to break or crack | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament is designed to support itself, making support removal a breeze. This saves you time and hassle during post-processing | ♻️ 【Cardboard Spool & Packaging】 - PolyTerra PLA 1.75mm filament comes in fully recycled cardboard packaging, making it a resource-saving conscious choice. Join the hundreds of thousands of satisfied Polymaker customers who love our products! | ⚙️ 【Printing Settings】 - Recommended nozzle temperature is 210°C, bed temperature is 50°C, and speed is 60mm/s for optimal results with the PolyTerra PLA Two Tone Red-Yellow Coextrusion 3D Printing Filament | ⚠️ 【Important Note】 - If you're experiencing bed adhesion issues, please use PVP (polyvinylpyrrolidone) glue on the print bed. It's also recommended to use hardened nozzles and gear for optimal printing with matte filament

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Dual Color Teal-Yellow PLA filament 1.75mm ( PLA Dual Color Teal-Yellow Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Dual Color Teal-Yellow is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament dichromatic Teal-Yellow ( PLA filament Dual Color Teal-Yellow ) | ⚠️ 【NOTE】 - Please use PVP (polyvinylpyrrolidone) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

✨ 【Dual Color Silk PLA】 - This dual-color PLA silk filament contains 2 beautiful colors (Lime-Magenta) for its left and right half, and the colors are chosen carefully by us to make it looks amazing when put together. The print looks very shiny and the colors transit smoothly. Perfect for printing some metal feel prints, anime figures, Christmas decoration pieces, gift prints, and festival ornaments | 🧵 【Tangle Free & Moisture Free】 - PolyLite Dual Color Silk Lime-Magenta 1.75 PLA filament is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Good Layer Adhesion】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite Two Color Silk Lime-Magenta PLA filament 1.75mm is a worry-free 3D printing filament that has great bed adhesion, very consistent color, and dimensional accuracy 【Note - turn off the fan for the first layer for improved bed adhesion】 | ♻️ 【Cardboard Spool】 - This Two Color Lime-Magenta PLA silk filament comes in upgraded 3.0 version packaging with a fully recycled cardboard spool and box | ⚙️ 【Printing Settings】 - Nozzle: 210~240˚C; Bed: 50˚C; Speed: 60mm/s. 【Please use higher printing temperature to 230~240 °C and flow rate to avoid clogs】 ( Silk PLA Filament Two Tone Lime-Magenta ) | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🔮 【Matte Finish】 - PolyTerra PLA is a PLA filament 1.75 featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Brown PLA filament 1.75mm ( PLA Brown Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Dark Brown is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Eco-Friendly】 - PolyTerra PLA is a material made from greenhouse gases and comes in a fully recycled cardboard packaging | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s | ⚠️ 【IMPORTANT NOTE】 - Please make sure to double check the diameter of your order as it may automatically change when selecting a color. Selected diameter: PolyTerra PLA filament 1.75mm Brown ( PLA filament Chocolate Brown )

🌡️ 【Impact and Heat Resistant】 - PolyLite ABS filament 1.75mm Galaxy Orange is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Galaxy Orange 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance | 🛠️ 【Higher Stability】 - PolyLite 1.75 ABS Filament Galaxy Orange ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements | 🔒 【Moisture Free】 - Our Polymaker Galaxy Orange ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with desiccant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament | ♻️ 【Cardboard Spool】 - Our Polymaker ABS 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box | ⚠️ 【Important Note】 - Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and the odor when printed is stronger than with PLA. Using a raft or brim or reducing the speed for the first layer could help avoid warping | ⚙️ 【Printing Settings】 - Nozzle: 245˚C - 265˚C; Bed: 90˚C - 100˚C; Speed: 30mm/s - 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength ( Selected Color: 3D filament ABS balck ) | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

⚠️ 【Nozzle Note】 - To avoid clogging the nozzle 0.6mm or larger diameter nozzle is necessary for printing galaxy filament | 🌌 【Galaxy Shiny PLA】 - Our Polymaker PLA glitter 3D printer filament contains a special shiny metal raw material that reflects light like the shiny stars in the galaxy. It can also be a Blue marble PLA to print stone effect print | 🧵 【Tangle Free & Moisture Free】 - PolyLite sparkle PLA filament 1.75mm is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite glittery 1.75 PLA filament is a worry-free product that has great bed adhesion, very consistent color, and dimensional accuracy. It is more rigid than almost all the competitive 3D printing filaments such as PLA+ filament 1.75mm | ♻️ 【Cardboard Spool】 - PolyLite galaxy filament PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundBlues of thousands of Polymaker customers | ⚙️ 【Printing Settings】 - Nozzle: 190~230˚C, Bed: 25~60 ˚C, Speed: 40~60 mm/s. Selected color: PolyLite 3D filament glitter PLA Galaxy Dark Blue | 🛡️ 【Lifetime Warranty】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need

🍧 【Color Change with Temperature PLA Green to Lime】 - This Color Changing Thermochromic PLA Filament contains some special dyes that change color with changes in temperature. It looks green under 31°C and starts to become lime when the temperature rises above 31°C. It is safe to touch and gives great finished print results, perfect for printing prints like temperature indicators for electronics or toys and home decorations | 🧵 【Tangle Free & Moisture Free】 - Quality First is our aim. PolyLite color transition PLA 1.75mm filament is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Note: Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Worry Free Printing Performance】 - No warping, no jamming, no blobs or layer delamination issues, very consistent color, and dimensional accuracy. PolyLite 1.75 PLA filament color change is formulated for the highly detailed printing demand and the best printing experience | ♻️ 【Cardboard Spool】 - PolyLite PLA 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box. With an innovative and professional team, Polymaker never stopped exploring | ⚙️ 【Printing Settings】 - Nozzle: 210˚C; Bed: 50˚C; Speed: 60mm/s. Selected color: PolyLite Green to Lime Color Change with Temperature PLA filament 1.75mm ( 1.75 PLA filament) Color Change Temperature: 31°C | 🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need. Green to Lime PLA filament 1.75 ( PLA Temperature Change Filament)

🦕 【Marble Filament】 - PolyTerra 3D printer filament White Marble PLA is a Stone PLA filament 1.75 featuring an incredible matte surface finish which helps hide the layers of your print. Perfect for artistic creation figure statue and architectural printing | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 3D printing filament PLA 1.75 features a ductility similar to PLA+ filament, which is less brittle and easier to print. Compatible with most 3D printers using 3D filaments | ✨ 【Easy Support Removal】 - Designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament stone 1.75mm White ( Granite Filament White ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🛡️ 【Matte Finish Army Series】 - PolyTerra PLA is a 1.75 filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra Army Series are specially developed for military enthusiasts, which include army light green and dark green, army blue, army red, army brown and army beige. You can creat tanks, military caps, soldiers, military vehicles and camouflage prints, back to army life and enjoy with Polymaker army 3D filaments | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament 1.75mm (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Army Beige is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Army Beige ( PLA filament Army Beige ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🧤 【Matte Finish Army Series】 - PolyTerra PLA is a 1.75 filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra Army Series are specially developed for military enthusiasts, which include army light green and dark green, army blue, army red, army brown and army beige. You can creat tanks, military caps, soldiers, military vehicles and camouflage prints, back to army life and enjoy with Polymaker army 3D filaments | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament 1.75mm (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Army Brown is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Army Brown ( PLA filament Army Brown ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🐊 【Matte Finish Army Series】 - PolyTerra PLA is a 1.75 filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra Army Series are specially developed for military enthusiasts, which include army light green and dark green, army blue, army red, army brown and army beige. You can creat tanks, military caps, soldiers, military vehicles and camouflage prints, back to army life and enjoy with Polymaker army 3D filaments | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament 1.75mm (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Army Dark Green is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Army Military Green ( PLA filament Olive Green ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Black PLA filament 1.75mm ( PLA Black Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Black is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament Black ( PLA filament Black ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Cappuccino PLA filament 1.75mm ( PLA Cappuccino Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Black is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament Cappuccino ( PLA filament Cappuccino ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 1.75 mm filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Grey PLA filament 1.75mm ( PLA Grey Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Grey is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Grey ( PLA filament Grey ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printer PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Light Purple PLA filament 1.75mm ( PLA Purple Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA plus (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Purple is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Lavender Purple ( PLA filament Purple ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: muted green PLA filament 1.75mm ( PLA muted green Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament muted green is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra muted green PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament muted green ( PLA filament muted green ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA muted green filament 1.75mm

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: muted purple PLA filament 1.75mm ( PLA muted purple Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament muted purple is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra muted purple PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament muted purple ( PLA filament muted purple ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA muted purple filament 1.75mm

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: muted white PLA filament 1.75mm ( PLA muted white Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament muted white is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool of PolyTerra PLA 3D printer matte filament 1.75 purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament muted white ( PLA filament smoke white ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra 1.75mm PLA is a 3D printer filament 1.75mm featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Orange PLA filament 1.75mm ( PLA Orange Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA + (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Orange is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Orange ( PLA filament Orange ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a PLA 1.75 mm filament featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Blue PLA filament 1.75mm ( PLA Light Blue Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Blue is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Blue ( PLA filament Ice Blue ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a PLA 1.75 mm filament featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Mint Light Green PLA filament 1.75mm ( PLA Mint Light Green Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Mint Light Green is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Mint Light Green ( PLA filament Mint Light Green ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printer PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Peanut Brown PLA filament 1.75mm ( PLA Peanut Tan Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Peanut Brown is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Peanut Brown ( Tan PLA filament) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA

🔮 【Matte Finish】 - PolyTerra PLA is a PLA 3D printer filament featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Sakura Pink PLA filament 1.75mm ( PLA Sakura Pink Filament ) | 🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use | 🛠️ 【Advanced Properties】 - PolyTerra PLA features a ductility similar to PLA+ filament 1.75mm (less brittle) | ✨ 【Easy Support Removal】 - PolyTerra PLA 3D printer filament Sakura Pink is designed to support itself and breakaway easily, saving your time and hassle during support removal | ♻️ 【Cardboard Spool】 - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers | 🌳 【Plant a Tree】 - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased | ⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Sakura Pink ( PLA filament Sakura Pink ) | ⚠️ 【NOTE】 - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA