We recommend a fresh Windows install with this card | Drivers are required for this card to function. | ASM1061 Chipset (Asmedia 1061 SATA Host Controller) | Supports Hot Plug and Hot Swap | Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps, 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier | Supports 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier | Works with SSDs

Chipset: ASMedia 1064 | 4 Internal SATA 6Gb/s Ports. SATA ports are bootable | Compliant with Serial ATA Specification 3.0. Hot Plug and Hot Swap | Compliant with PCI-Express Specification v1.0 | Supports Native Command Queue (NCQ). Supports Port Multiplier FIS Based Switching or Command Based Switching

Connect five SATA drives to any free PCI-E x4 Slot, providing up to 1700 MB/s Speed. | Plug and play supported, No additional software installation or setting required. | Can support port Multiplier that is not in a RAID configuration. | Complies with PCI Express base Specification Revision 3.1a. Compatible with SATA hard drives & Solid state drives and computer systems with SATA controllers. | This card is only design for storage Use only, can not Boot any OS/ system drives. Backed by syba 3 Year hassle-free warranty and lifetime customer service. Important Note: only work with PCI-E slot, not for PCI slot.

Connect five SATA drives to a M.2 B+M key Connection, providing up to 1700 MB/s Speed. | Plug and play supported, No additional software installation or setting required. | Can support port Multiplier that is not in a RAID configuration. Compatible with SATA hard drives & Solid state drives and computer systems with SATA controllers. | 2-Lane M.2 PCI-Express 3.0 interface (B & M Key). complies with PCI Express base Specification Revision 3.1a. | This card is only design for storage Use only, can not Boot any OS/ system drives. Backed by syba 3 Year hassle-free warranty and lifetime customer service.

Complies with PCI Express base specification revision 3. 1a. M. 2 B+M Key interface | Compliant with Serial ATA AHCI (advanced host controller interface) Specification Rev 1. 0, supports SATA 3. 0 transfer rate up to 6Gbps. Maximum sequencing read/ write speed 850 MB/s. | Micron JMB582 Chipset, Port Multiplier FIS-based and Command-based switching supported. Hot plug and Hot swap SATA ports. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. | Compatible with Windows XP/7/8/10/Mac/NAS/Linux OS. No driver installation is required. Support install Windows OS from Win10 PE.

Chipset: Marvell 88SE9230 | Installed with a full profile bracket, Low profile included with the package | Port Multiplier FIS-based and Command-based switching supported | Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps | Supports RAID 0 and 1 modes | 2 Internal SATA 6Gb/s Ports & 2 eSATA 6Gb/s Ports | Compatible with SATA 6G, 3G and 1.5G Hard Drives | PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots | RAID mode Supported: RAID 0/1/1+0 | HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset.

Adjustable Width from 6" to 10" | Anti-skid Grip and Castors | Maximum weight capacity of 66 lbs. | Model Number : SY-ACC65029

Adjustable Width from 6" to 10" | Anti-skid Grip and Castors | Maximum weight capacity of 66 lbs. | Model Number : SY-ACC65029

Complies with PCI-E Revision 1.1 | Mini PCI-E with transfer rate 2.5GB/s full duplex Channel | A high performance 1000baset-t Ethernet controller card | Backward compatible to 10/100baset-t networking | 10/100/1000Mbps data rate auto negotiation operation | Complies with PCI-e Revision 1.1 | Mini PCI-e with Transfer Rate 2.5Gb/s Full Duplex Channel | A High Performance 1000BASE-T Ethernet Controller Card | Backward Compatible to 10/100BASE-T Networking | 10/100/1000Mbps Data Rate Auto Negotiation Operation | Compatible to Existing CAT-5 UTP Cabling | Supports Jumbo Frame to 9K Bytes | Fully Compliant with IEEE 802.1P Layer 2 Priority Encoding