Pickup Height screws are metric thread which can fit most (not all) Epiphone pickups or most humbucker pickups made in China | 4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter) | Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China | Important Note: Please be sure to confirm the thread type of your pickups before you order the item, you may not be able to find the correct screws if you don't know the thread type of your pickups | These are just after market pickup screws, so the screws and springs may not be exact same with your original screws and springs; We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies

Made of Metal,not Plastic; Finish is faultless | Bottom is flat, not curved | Outer Size: 35.2mm x 35.2mm; Screws Distance: 25.2mm x 25.2mm | Please check the dimension to confirm it will fit your guitar before you order the item | Package includes: 1x Jackplate with screws

Handle Length: 218mm; Handle Width: 30mm | Metric M5 Screws Dimensions: Length 25mm; Head Diameter 6.93mm; Thread diameter 3.92mm; M5 Nut Dimension: Outer diameter 5.5mm; Height 8.05mm | Handle Screws & Nuts fit our Amplifier handles perfectly, suitable for replacing the old and broken Amplifier handles, easy to install | Easy to carry and storage, easy to use, good performance | Package includes: 1x Amplifier Handle, 4x Mounting Screw Kit, 4x Fixed Metal Plate

Mounting Screws: Made of Stainless Steel; Nuts: Made of Metal; | Metric M5 Screws Dimensions: Length 25mm; Head Diameter 6.93mm; Thread diameter 3.92mm; M5 Nut Dimension: Outer diameter 5.5mm; Height 8.05mm | Quality AMP Handle Nuts and Screws; Fit our Amplifier handles perfectly | Suitable for replacing the old and broken Amplifier handles, easy to install. | Package includes: 20x Mounting Screws, 20 x Nuts

Color: Gold with New Zealand Abalone Top (Abalone top is a natural material so knob to knob do have variations) | Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots; But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots; Please be sure to check the diameter of your pots before ordering.obs DO NOT fit large USA 1/4"(6.35mm) diameter pots(such as USA CTS Pots) | Material: Metal | High quality set screw knobs with faultless finish; Allen wrench for Set Screw is included | Please be sure to verify the diameter of your pots as well as the dimensions of the knobs before you order the item

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion