Features a directional polar pattern | Electret condenser for low distortion | Attached cable with 3-Pin XLR connector | Includes a wind muff for minimizing popping & noise

This camera glass screen protector fits Leica SOFORT 2 Instant Camera. | Notes: Clean the camera screen before sticking the glass screen protector, and do not leave dust and water stains, otherwise bubbles or non fit may appear after sticking the screen cover. | Easy to install without trapping any air bubbles, and is just as simple to remove. Its static adhesion method leaves no sticky residue behind your screen. | Ultra-thin but multi-layered protective material design can protect your display from dust, scratches, sweat, stains and light impact. | Package Include: Glass Protector x 1; Wet cleaning wipe x 1; Microfiber Cleaning Cloth x 1; Dust Absorber x 1

【Compatible】: This camera pouch can hold 1 compact camera up to 5.1 x 3.1 x 2.0"(130 x 80 x 50mm).Compatible with Sony ZV-1F,ZV-1,RX100VII,RX100VI,RX100VA,RX100V,RX100IV,RX100III,RX100II,Canon G7X III II,G9X II,SX740,OlympusTG-7, TG-6,TG-5,Ricoh GRIII HDF GRIIIx HDF GR IIIx GR IIIx,GRIII,GR3,Fujifilm XF10 etc. | 【Anti-Scratch】: Made of comfortable and durable neoprene material, soft, small and lightweight.The soft interior protects your camera better to prevent lens and screen scratches and abrasions. | 【Hook and Loop Closure】: The pouch features hook and loop closure for easy access. It can be used as a protection against dust, dirt, scratches and bumps during travel and storage | 【Extra Pockets】: The pocket on the front can hold card reader or memory card. The pocket on the side is designed for storing small items such as battery. It allows you to take the small camera accessories you need whenever you go out.Hook and loop closure design for easy access | 【4 Ways to Carry】: The hook and loop fastener on the back enables you to attach this camera pouch to the strap of your backpack. The pouch comes with a carabiner and a shoulder strap. The carabiner allows you to carry this camera case easily and the pouch also can be carried on one shoulder, or used as a cross-body pouch or chest pouch via the included adjustable shoulder strap.

Dedicated design for Canon EOS R10 Camera Body | Protects your Canon EOS R10 Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your EOS R10 camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R10 camera skin.

Dedicated design for Canon EOS R6 Mark II Camera Body | Protects your Canon EOS R6 Mark II Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your R6 Mark II camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R6 Mark II camera skin.

Dedicated design for Canon EOS R6 Mark II Camera Body | Protects your Canon EOS R6 Mark II Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your R6 Mark II camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R6 Mark II camera skin.

Dedicated design for Canon EOS R6 Mark II Camera Body | Protects your Canon EOS R6 Mark II Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your R6 Mark II camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R6 Mark II camera skin.

Dedicated design for Canon EOS R7 Camera Body | Protects your Canon EOS R7 Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your EOS R7 camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R7 camera skin.

Dedicated design for Canon EOS R7 Camera Body | Protects your Canon EOS R7 Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your EOS R7 camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R7 camera skin.

Dedicated design for Canon EOS R7 Camera Body | Protects your Canon EOS R7 Camera against unwanted scratches | Enhances the grip and provides a more secure hold | Decorates your EOS R7 camera body to be more stylish | Material: PVC Film，it's the good choice for EOS R7 camera skin.

PROTECTIVE - Prevents memory cards from dust and loss | HIGH CAPACITY - Several individual slots to store memory cards | PORTABLE - Credit card size, lightweight and portable | MARKABLE - With memory card patterns on the back for ease of use and can be marked | EASY PORTABILITY - A keychain hole is designed for easy carrying

Custom fit design for Leica Q3 Digital camera | Protects your device against unwanted scratches | Decorates your device to be more stylish and unique look, accurate cutouts, easy to install | 3M sticker, no traces when removed | Material: Vinyl Film + 3M Sticker

【New Design & High Capacity】This memory card case stores 36 SD/SDXC/SDHC cards with individual transparent plastic card holders (memory cards are NOT included), meet your daily memory cards storage needs. | 【Strictly Tailored】The interior customized EVA foam features shock absorption and offers the utmost protection. The case inside features 36 plug-in slots for storing clear plastic SD cards case. Independent slot holds the item securely in its slot and keeps it safe from getting knocked around. This case allows you to keep cards more organized and at your fingertips. | 【Double Protection】This memory card case is made of high-quality PC material and is pressure-proof, sturdy, and durable. It is water-resistant and can effectively keep dust free. The plastic clear case comes with snap-tight closure lid, which has good sealing ability. It can prevents moisture, dust, and debris from entering the case and damaging your cards. | 【Multi-Color/Clear Case】It comes with transparent SD card holders in clear, red, and blue colors, 12 per color to meet your different color preferences. The contents of the memory card can be classified according to the color.Package also contains a sheet of label stickers for recording the card information. Easy to organize and retrieve cards, and provides a more convenient and orderly storage. | 【Idea Choice】With a carabiner, it is easy to attach the case to backpack or hang it on a tripod, which is ideal for the convenience of your outdoor activities.

Ideal viewfinder eyecup eyepiece for Panasonic LUMIX S5II & S5IIX Mirrorless Camera, it is upgraded on the basis of the original eyepiece, extended long Design which is more suitable for your eyes | Please don't worry that this eyeshade will block the LCD camera screen. This viewfinder will not affect the use and flipping of the Panasonic S5 II S5 IIX camera screen. | Soft silicone material for eye comfort and protects viewfinder from dirt, moisture, dust, and unwanted light during use | Install Attention: Please use the screw driver in the package to remove the original eyecup from the S5II S5IIX camera and then install our long eyepiece | Package Include: Extended Eyecup X 1; Mini Screw Driver X 1; Replace Screws X 4

【Magnetic Cell Phone Fan】This New Design Fan Specially compatible with iPhone 15/14/13/12 series.without/with magnetic case (third party built-in magnetic metal case).Package Includes Magnetic sticker ring,it can sticks on your phone case or other Brand phones.It realizes the integrated design of the fan and your phone, allowing you to easily hold it with one hand and free the other hand. | 【With Phone Ring Holder】Comes with a built-in phone ring, providing you with a comfortable grip experience. Meanwhile, this phone ring can be used as a phone stand, turning the cell phone fan into a desktop fan, allowing your phone to stand both horizontally and vertically, allowing you to enjoy coolness while working or playing. | 【3 Speeds & USB Battery Power】You just need to press the power button to change the 3 wind speeds setting.Under the operation of the first level wind, it can be used for up to 5 hours.It can be charged through the USB-C interface, supporting simultaneous charging & use. (Note: This fan cannot charge the phone wirelessly!There may be slight heating during charging, but it does not affect usage.) | 【Compact & Portable】This cell phone fan is easily magnetically attached to the back of your phone. You no longer have to hold the phone with one hand and the fan with the other. Compact Size can keep it in your bag when not in use. At the same time, it can freely adjust the fan angle to meet the blowing needs at different angles. | 【Summer Cooler Accessories】Whether you are commuting or relaxing outdoors, our magnetic phone fan can provide ideal convenience. Imagine being able to scroll through your social media account while feeling a gentle and cool breeze blowing on your face. It's the summer companion to keep you cool while outdoor.

【Upgrade Design】There are three detachable memory card holders, which are placed flat inside the case to accommodate small SD/TF card case the size of credit card, to meet the needs of less storage cards when traveling outdoor and daily memory card storage. | 【3 Flexible Card Slots】The three card slots can hold three slim card cases of Kiorafoto: SD4, SDMSD6, and MSD10 (Each slot is engraved with its own model name).The individual card slots ensure memory cards remain secure, safeguarding against loss and minimizing contact between cards, thereby preventing scratches. It can also be removed when not needed. | 【Large Capacity】This large memory card case can hold 30 SD SDHC SDXC and 60 TF MSD cards(without three slim card holder). The three slim memory card wallet: SD4 can hold 4 SD cards; SDMSD6 can hold 2 SD cards and 4 Micro SD cards; The MSD10 can hold 10 Micro SD cards. | 【High Quality】Made from high-strength ABS plastic, durable and shockproof. Security is further ensured through a premium silicone O-ring seal, fortifying the case's closure for a watertight and secure protection. The interior is made of customized-cut EVA foam, providing superior shock absorption and ultimate protection for your valuable memory cards. | 【Idea Choice】Includes a carabiner and a card removal tool, easy to carry. Package also contains 3 sheets number stickers and 1 sheet notepaper, easy to organize and retrieve memory cards, provides a more convenient and orderly storage.

Kiorafoto Hot shoe cover-Maximum protection with secure fit, fits easily to your camera's Multi Interface Shoe | Kiorafoto Hot shoe cover-Packs snugly with your camera kit, full compatible with Sony FA-SHC1M | Kiorafoto Connector cap fits flashes, microphones, video lights etc. that have MI foot for Sony multi-interface shoe; | Kiorafoto Connector cap protects contact terminals against scratches, dust, moisture or other damaging elements | Kiorafoto Connector cap easy to install and remove;Helps store your devices in good condition

This camera glass screen protector fits Canon PowerShot V10 Vlog Camera. | Notes: Clean the camera screen before sticking the glass screen protector, and do not leave dust and water stains, otherwise bubbles or non fit may appear after sticking the screen cover. | Easy to install without trapping any air bubbles, and is just as simple to remove. Its static adhesion method leaves no sticky residue behind your screen. | Ultra-thin but multi-layered protective material design can protect your display from dust, scratches, sweat, stains and light impact. | Package Include: Glass Protector x 1; Wet cleaning wipe x 1; Microfiber Cleaning Cloth x 1; Dust Absorber x 1

Notice! Fits the Camera with Eyecup can be relaced, three pieces of eyecups used with any CANON EOS DIGITAL camera or NIKON D series camera | Rain Cover Size:(H x L): 820 x 760mm(32.3'' x 29.9''), Compatible with Maximum Lens Diameter x length: 95mm x 257mm(3.74'' X 10.12'') | Protect your camera and lens from rain, snow, salt spray, dust, sand and any other unexpected weather conditions. | The unique opening design of the eyecup on the transparent window ensures that there is no obstruction between the eyecup and the viewfinder. | Rain cover with adjustable sleeves make you to easily control the camera whether holding or tripod, easy to be installed to your camera

Professional camera rain cover protector for the (cameras + lens ) less than 13.38" , such as canon 70-200mm and nikon 24-200mm. | Cover Size: 20.8×15.4inch, Protect your camera and lens from rain, snow, salt spray, dust, sand and any other unexpected weather conditions. | The interior tight cuff design and non-slip straps allows you to adjust the lens sleeve to fit your camera lens. | With an ultra-clear viewing window that can easy to see the display screen and viewfinder and also can touch the screen to use. | Rain cover with dual adjustable sleeves and double waterproof zipper make you to easily control the camera whether holding or tripod.

Custom fit design for Leica Q3 Digital camera | Protects your device against unwanted scratches | Decorates your device to be more stylish and unique look, accurate cutouts, easy to install | 3M sticker, no traces when removed | Material: Vinyl Film + 3M Sticker

Custom fit design for Leica Q3 Digital camera | Protects your device against unwanted scratches | Decorates your device to be more stylish and unique look, accurate cutouts, easy to install | 3M sticker, no traces when removed | Material: Vinyl Film + 3M Sticker

Custom fit design for Leica Q3 Digital camera | Protects your device against unwanted scratches | Decorates your device to be more stylish and unique look, accurate cutouts, easy to install | 3M sticker, no traces when removed | Material: Vinyl Film + 3M Sticker

Custom fit design for Leica Q3 Digital camera | Protects your device against unwanted scratches | Decorates your device to be more stylish and unique look, accurate cutouts, easy to install | 3M sticker, no traces when removed | Material: Vinyl Film + 3M Sticker

Compatible Lens : Nikon AF-S DX NIKKOR 55-300mm F/4.5-5.6G ED VR Zoom Lens only | Blocks stray light from entering the lens, no vignetting would show with the hood on | Not impact the use of filters and lens caps, reversible for compact storage | Non-glare matte finish prevents reflections. Extra protection from accidental impact | Package include: Lens Hood x 1, Microfiber Cleaning Cloth X 1

This eyecup is compatible with Z6III Z6II Z7II Z7 Z6 Z5 mirrorless camera, and replaces Nikon DK-29 Rubber Eye cup.(NOT fits other Nikon cameras). | Made of ABS and soft silicone material, it is comfortable and durable. It not only keeps your viewfinder from impact and scratches but also protects it from dirt, moisture, dust. Morever, it effectively blocks stray light from the viewfinder, reduce glare and enhance the camera user experience as a whole . | The Z6III eye cup features a round design, and is suitable for shooting in the horizontal or vertical orientation. Give you a comfortable shooting experience. | Slide it onto the viewfinder for installation. This eyecup does not interfere with the camera's eye sensor detection or the normal use of the Z6 II Z7 II Z 7 Z 6 Z 5 LCD screen. (Note: If you are using the Z6 III camera, this eyecup may touch the LCD screen slightly, but it will not affect normal use.) | If you own a Z6 III Z7 II Z6 II Z7 Z6 Z5 Camera, this DK-29 Eyecup is an ideal accessory for you!

This camera glass screen protector fits for Insta360 Ace Pro Camera.(Note: Not for Insta360 Ace camera！！！！！) | Notes: Clean the camera screen before sticking the glass screen protector, and do not leave dust and water stains, otherwise bubbles or non fit may appear after sticking the screen cover. | Easy to install without trapping any air bubbles, and is just as simple to remove. Its static adhesion method leaves no sticky residue behind your screen. | Ultra-thin but multi-layered protective material design can protect your display from dust, scratches, sweat, stains and light impact. | Package Include: Glass Protector x1；Lens Protector x1；Wet Cleaning Wipe x1；Microfiber Cleaning Cloth x1；

【Compatible With】This Camera Case is designed to store your Leica SOFORT 2 Instant Camera.（Due to color difference in the picture, please refer to the actual color of the RED SOFORT 2 case for accuracy） | 【High Quality】Made of soft neoprene material, this SOFORT 2 case is wear-resistant, shock-resistant, lightweight and comfortable, which can prevent your Leica SOFORT 2 Instant camera from being bumped, worn and scratched. | 【Easy Storage】The easy-access design enables quick access to the camera. The pouch features stylish edge stitching for a handmade appearance, which makes it attractive. | 【Compact Size】This SOFORT 2 case is small in size and can be placed inside your bag without taking up too much space. Size: 160 x 120 x 35 mm (6.3 x 4.7 x 1.4'') | 【Idea Choice】If you are looking for a travel camera case to protect Leica SOFORT 2 Instant Camera, this protective bag is your good choice. It can also be used as an outdoor storage bag for daily small items to meet your daily storage needs. （Package Not Include Any straps.）

Compatible with any light-weight DSLR, Mirrorless and Point & Shoot cameras with a strap eyelet larger than 7mm x 3mm (L x W) | Suitable for people with a wrist circumference less than 22 cm | Made of high-quality neoprene material, waterproof，comfortable and durable | Quick-release clip for easy detachment | This strap offers great comfort and security around your wrist

Ideal viewfinder eyecup eyepiece for Olympus OM SYSYEM OM-1 camera | Replaces Olympus EP-18 eyecup | Blocks light and helps you concentrate on taking photo | Soft silicone material for eye comfort, ease your eye hitting on viewfinder incautiously | Protects viewfinder from impact and scratches effectively

Ideal viewfinder eyecup eyepiece for Panasonic DC-GH6 GH5II GH5 Mark II GH5S GH5 Camera | Replaces Panasonic 4YE1A561Z eyecup | Soft silicone material for eye comfort, ease your eye hitting on viewfinder incautiously | Blocks light and helps you concentrate on taking photo | Protects viewfinder from impact and scratches effectively.

Ideal viewfinder eyecup eyepiece for Sony Alpha A7RV & A7 IV & A7S Mark III & Alpha 1 camera, replaces Sony FDA-EP19 eyeshade | Made of soft silicone material ,conforms to the shape of your eye to create a tighter and more comfortable fit. | Long silicone Eyepiece can better block the excess stray light from the viewfinder, reduce glare and enhance the camera user experience as a whole | Its deepened design can also better protect the camera's viewfinder from impact and scratch. At the same time, it also helps to reduce the chance of your nose touching the camera's LCD screen and reduce the generation of oil stains | Just take off the original eyecup and install our extended eyepiece, which is very easy and simple. Note: This eyecup is only fits Sony A7R V & A7M4 & A7SIII & A1 cameras.

Ideal viewfinder eyecup eyepiece for Nikon Zfc Z fc camera | Replaces Nikon DK-32 eyecup | Soft silicone material for eye comfort, ease your eye hitting on viewfinder incautiously | Blocks light and helps you concentrate on taking photo | Protects viewfinder from impact and scratches effectively.

Ideal viewfinder eyecup eyepiece for Fujifilm X-S20 X-S10 X-T200 | Easy for Installation | Blocks light and helps you concentrate on taking photo; Protects viewfinder from impact and scratches effectively | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously | Notice! When using this eyecup, flipping the screen may have an impact on the eyecup.

Ideal viewfinder eyecup eyepiece for Fujifilm X-T5 X-T4 X-T3 X-T2 X-T1 X-H2 X-H2S GFX50S II GFX50S GFX100 GFX 100S X-H1 | Replaces Fuji EC-XTL, EC-XTM, EC-XTS, EC-GFX and EC-XHW eyecup | Blocks light and helps you concentrate on taking photo | Protects viewfinder from impact and scratches | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously

Ideal viewfinder eyecup eyepiece for Sony A7C Alpha 7C Full-Frame Compact Mirrorless Camera | Easy for Installation | Blocks light and helps you concentrate on taking photo; Protects viewfinder from impact and scratches effectively | Soft silicone material for eye comfort, ease your eye/eyeglass hitting on viewfinder incautiously | Notice! This eyecup only fits Sony A7C Camera

Ideal viewfinder eyecup eyepiece for Canon EOS R7 Mirrorless Camera, it is upgraded on the basis of the original eyepiece, extended long Design which is more suitable for your eyes | Please don't worry that this eyeshade will block the LCD camera screen. This viewfinder will not affect the use and flipping of the Canon EOS R7 camera screen. | Soft silicone material for eye comfort and protects viewfinder from dirt, moisture, dust, and unwanted light during use. | Install Attention: Please use the screw driver in the package to remove the original eyecup from the R7 camera and then install our long eyepiece | Package Include: Extended Eyecup X 1; Mini Screw Driver X 1; Replace Screws X 4