★ KOERTACOO NP-F Battery Adapter Plate designed to provide greater battery life for your camera rig via an NP-F battery for Sony. | ★ Comes with 1/4" screw & hot shoe mount, can be mount on camera/rig. | ★ With two DC 5.5*2.1mm 7.4V output.By a cable or dummy battery to power camera,field monitor,etc. | ★ Plate mount material: shell ABS + metal aluminum plate + metal copper gold plated pin. | ★ Package Include:1 x Battery Adapter Plate. 1 x 1/4" Hand Screw. 1 x DC Male to Male Coiled Cable.1 x 1/4" Hot Shoe Mount. 1x Storage bag.

★This remote controller is specially designed for Panasonic cameras, with functions such as zoom/focus/iris control/start & stop. | ★Comes with a 40" integrated cable with 2.5mm and 3.5mm connectors. The 2.5mm connector is used for zoom/start/stop, and the 3.5mm connector is used for focus/iris control. | ★When using, please plug in the controller link cable before turning on the power of the camcorder. Brass clips on the back. it can be easily installed on most tripods, booms, stabilizers and most camera brackets (installation range 8mm-28mm). | ★Compatibility: Panasonic camcorder DVX200/AG-HPX500MC P2/PX285/AG-HVX200MC P2 DV/AG-HMC43MC/DVC-180AMC DVCOM DV/DVC-180BMC DVCOM DV/AG-DVC203MC/AG-DVC203MC DV/AG-DP800 S-VHS /AG-HMC153MC AVCCAM DV/AG-HVX200MC P2PALM DV/AG-HPX173MC P2PALM DV/Panasonic GS400 DVC33, DVC63,HVX200,HVX200MC/Panasonic AC160AMC,AG-HDPX260MC/ 180A 180B DVC63 HVAG-200 HVX203 AC160 HC-X1000.For other compatible models, please check the details page. | ★Very Important: this controller is not compatible with some Panasonic Camcorder, and zoom may be uncontrolled.If you encounter this problem, please contact us by mail and we will give you a full refund.

High Customization: This D-Tap splitter is designed to expand multiple D-Tap power outputs. 3 channels of intelligent shunt, no interference with each other, can be connected to the V-Mount/Gold mount battery, and can provide stable power supply to up to 3 independent devices at the same time. | Voltage Display: With real-time voltage display, the battery level can be understood through the voltage display during the shooting process to ensure the normal progress of shooting. | Easy Installation: It can be easily attached to the camera rig or equipment with 1/4" mounting screws. Hex wrench is included for tightening 1/4 screws. | Safe And Reliable: The splitter supports a maximum current output of 8A. Built-in smart chip, with 149 Fahrenheit over-temperature protection, over-current protection, short-circuit protection, input reverse protection, output anti-backfill protection. | Specifications: Straight cable length 23.62inch . Input/output voltage: 11-16.8V. Operating temperature: -4°F~149°F.

High Customization: This D-Tap splitter is designed to expand multiple D-Tap power outputs. 3 channels of intelligent shunt, no interference with each other, can be connected to the V-Mount/Gold mount battery, and can provide stable power supply to up to 3 independent devices at the same time. | Voltage Display: With real-time voltage display, the battery level can be understood through the voltage display during the shooting process to ensure the normal progress of shooting. | Easy Installation: It can be easily attached to the camera rig or equipment with 1/4" mounting screws. Hex wrench is included for tightening 1/4 screws. | Safe And Reliable: The splitter supports a maximum current output of 8A. Built-in smart chip, with 149 Fahrenheit over-temperature protection, over-current protection, short-circuit protection, input reverse protection, output anti-backfill protection. | Specifications: Coiled power cable length 11.8inch (maximum stretch length: 31inch). Input/output voltage: 12-16.8V. Operating temperature: -4°F~149°F.

★ It is specially designed for Blackmagic Pocket cinema camera 4K 6K cameras, with one DC 12V/3A output and two DC 8V/3A outputs, one Type-C (input/output) port. BMPCC 4K/6K cameras can be powered using BMPCC 4K/6K DC locking cables and LP-E6 dummy battery. | ★ The Type-C PD port can input to charge NP-F series batteries, and can also output to power other devices such as cameras, mobile phones, etc. | ★ Comes with shoe mount for mounting on cameras/rigs and other equipment. The battery plate has 4 indicators, A bright red LED indicates that power is on, 1 green light means 20% battery power, 2 green lights indicate 50% battery power, and 3 green lights indicate 100% battery power. | ★ Compatible with Sony NP-F series batteries, including NP-F970, F960, F750, F770, F550, F570 batteries, with 8V/12V DC male to male coiled cable (included), can be used for video monitors, wireless video transmission, LED lights, additional equipment, etc. | ★ The metal 2-pin connector is a self-locking connector. When the BMPCC 4K/6K camera is plugged in, it will lock automatically. When pulling out the DC cable, you need to pinch the metal connector on the top and pull it out, not directly pinch the cable.

★ The V lock battery plate features a 15V DC barrel output, an 8V DC barrel output, a 12V DC barrel outputs, a 5V DC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off. | ★ Updated version: The new screw/wing nut combination enables the V mount battery plate to be firmly installed at multiple angles. | ★ Compatibility:Including but not limited to Sony A7 A7S A7R a7II a7SII a7RII A6000 A6100 A6300 A6500 DSLR Cameras and BMPCC 4K/6K etc. | ★ Smart and wide applications power output systems. With the help of the battery plate Power up monitors, DSLR cameras, mobile phone, led lights, on camera flash, etc. | ★ 15mm Rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. V-Lock Mount which access the quick release the battery attachments.