Fits all 2015+ Harley Davidson Road Glides bikes. | These brackets are extremely easy to install and you will have your amp mounted in minutes! | wiring kit includes High quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, 14 Gauge speaker wire, wire loom and nylon zip ties | Comes with easy to follow full COLOR wire and mountng installation instructions. | These brackets have holes already in them to bolt directly to a Rockford Fosgate PBR400X4D, PBR300x2, and PBR300x4 amps.

Fits all bikes with the batwing front fairing and will work with both stock Harman Kardon Radio and all aftermarket radios. (does NOT fit 2005 and older bikes with stock radios, Road Glides or new 2014 + years) | These brackets are made of strong light weight aluminum. | The Rockford Fosgate PBR400X4D, pbr300x2, and pbr300x4 will mount directly to precut holes in the brackets. | Comes with easy to follow full COLOR installation instructions. | Will fit other model amps with a little modifications , wiring kits also avalible pt# B00L1PNX48

Fits all 2014 to 2020+ Harley Davidson bikes with the batwing front fairing. | These brackets are extremely easy to install and you will have your amp mounted in minutes! | These brackets have threaded inserts in them to make them compatible with Rockford Fosgate T400x4AD or TM400x4AD amp. | Comes with easy to follow full COLOR installation instructions. | All necessary hardware included in the kit, wiring kits also avalible pt# B00L1PNX48

Fits all 2014 to 2020+ Harley Davidson bikes with the batwing front fairing. | These brackets are extremely easy to install and you will have your T400x2AD or TM400x2AD amp mounted in minutes! | These brackets have threaded inserts in them to to make them compatible with Rockford Fosgate T400x2AD or TM400x2AD amp. | Comes with easy to follow full COLOR installation instructions. | All necessary hardware included in the kit, wiring kits also avalible pt# B00L1PNX48

Fits all bikes with the batwing front fairing and the stock Harman Kardon Radio. (does NOT fit Aftermarket radios, 2005 or older stock radios, Road Glides and new 2014 + years) check my other item of brackets for these bikes. | These brackets are made of strong light weight 1/8 inch (0.125) aluminum that is also good for heat distribution . | The Kenwood KAC-M1824BT will mount directly to precut holes in the brackets. or | Comes with all the necessary hardware and easy to follow full COLOR installation instructions. | Will fit other model amps with a little modifications , wiring kits also avalible pt# B00L1PNX48

Fits in all Kawasaki Vaquero and Voyager from 2009 - present | This brackets are extremely easy to install and you will have your amp mounted in no time! | This bracket is made to bolt directly to a Rockford Fosgate PBR400X4D or PBR300x2 and PBR300x4 amps. | Comes with easy to follow full color photo instructions. | Brackets are made from light aluminum that is very rigid. , wiring kits also avalible pt# B00L1PNX48

Fits in all Kawasaki Vaquero and Voyager from 2009 - present | This brackets are extremely easy to install and you will have your amp mounted in no time! | This bracket is made to bolt directly to a Kenwood KAC-M1824BT amp. | Comes with all necessary hardware and easy to follow full color photo instructions. | Brackets are made from light aluminum that is very rigid. , wiring kits also avalible pt# B00L1PNX48

Fits in all Kawasaki Vaquero and Voyager from 2009 - present | This brackets are extremely easy to install and you will have your amp mounted in no time! | Wiring kit includes High quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, 16 Gauge speaker wire, wire loom and nylon zip ties | Comes with easy to follow full color photo instructions. | This bracket is made to bolt directly to a Rockford Fosgate PBR400X4D, PBR300x2, and PBR300x4 amps.

Fits Victory Cross Country bikes with the batwing front fairing. | These brackets are made of strong light weight aluminum that is also good for heat distribution . | Comes with all the necessary mounting hardware and easy to follow full COLOR mounting installation instructions. | These brackets have threaded inserts installed and is compatible with Rockford Fosgate T400x4AD or TM400x4AD amp. | We also offer wiring kits with High quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, 14 Gauge speaker wire, wire loom and nylon zip ties and color wiring instructions

Fits all bikes with the batwing front fairing and will work with both stock Harman Kardon Radio and all aftermarket radios. (does NOT fit 2005 and older bikes with stock radios, Road Glides or new 2014 + years) | These brackets are made of strong light weight aluminum that is also good for heat distribution. | Wiring kit includes high quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, High grade speaker wire, and nylon zip ties. All wires are covered in mesh sheathing for extra protection and for a professional look. | Comes with easy to follow full COLOR mounting and wiring installation instructions. | The Rockford Fosgate PBR400X4D, pbr300x2, and pbr300x4 will mount directly to precut holes in the brackets.

Fits all bikes with the batwing front fairing and a aftermarket or stock Harman Kardon Radio. (does NOT fit 2005 or older stock radios, Road Glides and new 2014 + years) check my other item of brackets for these bikes. | These brackets are made of strong light weight aluminum that is also good for heat distribution . | The Rockford Fosgate T400x4AD, TM400x4AD, T400x2AD, TM400x2AD will mount directly to precut holes in the brackets. | Comes with all the necessary hardware and easy to follow full COLOR installation instructions. | Will fit other model amps with a little modifications , wiring kits also avalible pt# B00L1PNX48

This kit comes with everything you need for wiring your amp in the front fairing of your Harley Davidson (amp mounting brackets also available) | High quality 8 Gauge positive and negative wire covered in a flexable mesh cover that not only protects the wire but makes for a professional looking installation (both wires are long enough to run from the front fairring to the battery) | 8 Gauge fuse holders with 60 Amp Fuse, and nylon zip ties | Includes step by step wiring instructions with easy to follow full color photos | High quality speaker wire covered in tough flexable wire mesh covering (enough to wire 2 fairing speakers)

This kit comes with everything you need for wiring your amp in the front fairing of your Harley Davidson (amp mounting brackets also available) | High quality 8 Gauge positive and negative wire covered in a flexable mesh cover that not only protects the wire but makes for a professional looking installation (both wires are long enough to run from the front fairring to the battery) | 8 Gauge fuse holders with 60 Amp Fuse, and nylon zip ties | Includes step by step wiring instructions with easy to follow full color photos | High quality speaker wire covered in tough flexable wire mesh covering (enough to wire 2 fairing speakers)

Fits all bikes with the batwing front fairing and the stock Harman Kardon Radio. (does NOT fit Aftermarket radios, 2005 or older stock radios, Road Glides and new 2014 + years) check my other item of brackets for these bikes. | These brackets are made of strong light weight (0.090) aluminum that is also good for heat distribution . | Wiring kit includes high quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, High grade speaker wire, and nylon zip ties. All wires are covered in mesh sheathing for extra protection and for a professional look. | Comes with easy to follow full COLOR mounting and wiring instructions. | Compatible with Rockford Fosgate PBR400X4D, pbr300x2, and pbr300x4 will mount directly to precut holes in the brackets.

This kit comes with everything you need to wire in a 4 channel amplifier and 2 speakers located in each saddlebag. **You may need to purchase wire connectors to match your speakers. | We only use high end power cable and speaker wire that is covered in strong flexible mesh loom with waterproof quick disconnects on the ends to allow for saddlebag removal. | Kit includes: 2 sets of RCA/Remote to run from radio to amp, 8 gauge positive and negative wire to run from your battery to saddlebag with a quick disconnect end, Enough covered positive and negative wire to run through a standard saddlebag to your amplifier, Enough covered speaker wire to run from your amplifier at the from of the bike to your saddlebag quick disconnects, Enough speaker wire to run through your saddlebag to your speaker, Rubber grommets, zip ties, and installation instructions. | Includes step by step wiring instructions with easy to follow full color photos that make installation a breeze. (instructions are based off a Street Glide and may vary slightly with other makes/models) | Kits are made to fit standard saddlebags, stretched or extended bags may need extra length added to kits. Feel free to contact us for custom kits

This kit comes with everything you need to wire an amplifier and speakers that are located in the saddlebag. Kit is Plug and Play, no cutting or soldering to your bike is needed but you will need to drill one hole in each saddlebag. **You may need to purchase wire connectors to match your speakers. | We only use high end power cable and speaker wire that is covered in strong flexible mesh loom with waterproof quick disconnects on the ends to allow for saddlebag removal. | Kit includes: RCA/Remote wires to run from radio to amp, 8 gauge positive and negative wire to run from your battery to saddlebag with a quick disconnect end, Enough covered positive and negative wire to run through a standard saddlebag to your amplifier, Enough covered speaker wire to run from your amplifier at the from of the bike to your saddlebag quick disconnects, Enough speaker wire to run through your saddlebag to your speaker, Rubber grommets, zip ties, and installation instructions. | Includes step by step wiring instructions with easy to follow full color photos that make installation a breeze. (instructions are based off a Street Glide and may vary slightly with other makes/models) | Kits are made to fit standard saddlebags, stretched or extended bags may need extra length added to kits. Feel free to contact us for custom kits

This kit comes with everything you need to wire in saddlebag speakers to a amplifier located in the front fairing. Kit is Plug and Play, no cutting or soldering to your bike is needed but you will need to drill one 1/2" hole in each saddlebag. **You may need to purchase wire connectors to match your speakers. | We only use high end oxygen free copper speaker wire covered in strong flexible mesh loom with waterproof quick disconnects on the ends to allow for saddlebag removal. | Kit includes: Enough covered OFC speaker wire to run from your amplifier at the from of the bike to your saddlebag with waterproof quick disconnects, Enough covered speaker wire to run through your saddlebag to your speaker. Rubber grommets for saddlebag, zip ties, and easy to follow color installation instructions. | Includes step by step wiring instructions with easy to follow full color photos that make installation a breeze. (instructions are based off a Street Glide and may vary slightly with other makes/models) | Kits are made to fit standard saddlebags, stretched or extended bags may need extra length added to kits. Feel free to contact us for custom kits

Fits Victory Cross Country bikes with the batwing front fairing. | These brackets are made of strong light weight aluminum that is also good for heat distribution . | Comes with all the necessary mounting hardware and easy to follow full COLOR mounting installation instructions. | These brackets have threaded inserts installed in them and is compatible with Rockford Fosgate T400x2AD or TM400x2AD amp. | We also offer wiring kits with High quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, 14 Gauge speaker wire, wire loom and nylon zip ties and color wiring instructions

Fits in all 98-13 Road Glides front fairing securely and Comes with easy to follow full color photo instructions. | These brackets are extremely easy to install and you will have your amp mounted in minutes! | Wiring kit includes high quality 8 Gauge positive and negative wire, 8 Gauge fuse holders with 60 Amp Fuse, High grade speaker wire, and nylon zip ties. All wires are covered in mesh sheathing for extra protection and for a professional look. | They will fit other amps just send me a message of your amplifier dimensions and I will get back to you it it will work. | Brackets are made from light aluminum that is very rigid. These brackets have holes already in them to bolt directly to a Rockford Fosgate PBR300x2 and PBR300x4 amps.

This kit comes with everything you need for wiring your amp in the front fairing of your motorcycle (amp mounting brackets also available) | High quality 8 Gauge positive and negative wire covered in a flexable mesh cover that not only protects the wire but makes for a professional looking installation (both wires are long enough to run from the front fairring to the battery) | 8 Gauge fuse holders with 60 Amp Fuse, and nylon zip ties | Includes step by step wiring instructions with easy to follow full color photos from a 2013 Harley street glide but still a very helpful guide for other make/model bikes. | High quality speaker wire (enough to wire 2 fairing speakers) Also covered in the tough flexable mesh covering