Product DescriptionThe company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation. Fully Automatic, new generation float arm for enhanced reliability. Suitable for high-efficiency, gas-furnace condensate. 3 drain holes with 20ft. shut off head and 8.7 PSI. Capable of drawing 50 GPH @ 5ft.. Intermittent Liquid Temp. up to 120deg F. Little Giant Pump Company once again defines state-of-the-art in pump design. UL and CSA listed. 1-year limited warranty. Flow (GPH): 65 GPH with a 1 ft. rise, Volts: 115, HP: 1/60, Max. Total Head (ft.): 15, Max. Suction Lift (ft.): 5, Discharge Port (in.): 3/8, Volute: Glass-filled Flame Retardant Polypropylene, Impeller Shaft: Glass-filled Flame Retardant Polypropylene, Power Cord (ft.): 6, Thermal Overload Protection: Yes If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST.From the ManufacturerLittle Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCMA-15ULS features a stainless steel pump shaft, a snap-action pump switch, a removable 3/8 inch barbed check valve, a 6 foot power cord, and a 1/50 horsepower high performance motor with thermal overload protection. The pump also features an ABS tank, ABS motor cover, and ABS volute. With a check valve, the VCMA-15ULS pumps 65 GPH (with a discharge head of one foot). The pump's tank has a capacity of 1/2 gallon.