1.SLZB-06p7 is a Zigbee to Ethernet/USB/WiFi adapter with POE support, comes pre-flashed and ready to use. Can be used as a Zigbee 3.0 gateway in the open source automation platforms - Zigbee2MQTT, Home Assistant, ZHA. | 2.Works in both modes - LAN and USB. Mode can be changed in firmware or via button. | 3.Can add as many Zigbee coordinators to one server as you want. So you can easily cover different rooms, buildings and connect them to the same Home Assistant instance. | 4.You can power the device through POE or type-C. microUSB-typeC adapter is included in the package as well. | 5.Zigbee SoC CC2652P7 features +20dB gain, +5dB antenna included. | 6.CC2652P7 and ESP32 can be updated distantly, without physical access to the device. | 7.ESP32 can be flashed over USB as well, autoflash feature is integrated. Just plug type-C and flash. | 8.Login to the web-interface can be secured by the password.

1.SLZB-06 is a Zigbee to Ethernet/USB/WiFi adapter with POE support, comes pre-flashed and ready to use. Can be used as a Zigbee 3.0 gateway in the open source automation platforms - Zigbee2MQTT, Home Assistant, ZHA. | 2.Works in both modes - LAN and USB. Mode can be changed in firmware or via button. | 3.Can add as many Zigbee coordinators to one server as you want. So you can easily cover different rooms, buildings and connect them to the same Home Assistant instance. | 4.You can power the device through POE or type-C. microUSB-typeC adapter is included in the package as well. | 5.Zigbee SoC CC2652P features +20dB gain, +5dB antenna included. | 6.CC2652P and ESP32 can be updated distantly, without physical access to the device. | 7.ESP32 can be flashed over USB as well, autoflash feature is integrated. Just plug type-C and flash. | 8.Login to the web-interface can be secured by the password.

1.SLZB-06M is a Zigbee to Ethernet/USB/WiFi adapter with POE support, comes pre-flashed and ready to use. Can be used as a Zigbee 3.0 gateway in the open source automation platforms - Zigbee2MQTT, Home Assistant, ZHA. | 2.Works in both modes - LAN and USB. Mode can be changed in firmware or via button. | 3.Can add as many Zigbee coordinators to one server as you want. So you can easily cover different rooms, buildings and connect them to the same Home Assistant instance. | 4.You can power the device through POE or type-C. microUSB-typeC adapter is included in the package as well. | 5.Zigbee SoC EFR32MG21 features +20dB gain, +5dB antenna included. | 6.EFR32MG21 and ESP32 can be updated distantly, without physical access to the device. | 7.ESP32 can be flashed over USB as well, autoflash feature is integrated. Just plug type-C and flash. | 8.Login to the web-interface can be secured by the password.

1.Pre-flashed and ready-to-use with ZHA Home Assistant and Zigbee2MQTT. | 2.Zigbee 3.0 support and Thread/Matter ready through multipan firmware. | 3.based on EFR32MG21 and CP2102N with +20dB amplifier. | 4.+3dB antenna included. | 5.flashing Zigbee without physical access possible