MicroUSB Female to Male Push Power Switch for Raspberry Pi 3 / 2 / B+ / A+ / 0 Designed by LoveRPi | One Push On/Off Power with Dramatically Reduces Wear and Tear on Sensitive MicroUSB Connectors | Dual Insulated 18 AWG Oxygen Free Copper Cable, 65% Lower Resistance and 100% Higher Current vs 22AWG | Smallest Voltage/Current Drop, Use Power Suppy Capable of 4.95V at the Amperage Desired, LoveRPi M

EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications. | LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios. | QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+. | NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance. | MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100°C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.

AML-S905X-CC WITH HEATSINK AND WIFI: Le Potato is a powerful SBC platform capable of handling many computing tasks while consuming less than a watt. This bundle adds a bespoke heatsink and plug and play WiFi dongle for getting the most from your board. | BESPOKE ANODIZED HEATSINK: The anodized heatsink provides a protective oxide layer that resists environmental corrosion while offering significantly better thermal performance. Dramatically increase sustained performance while increasing reliability via reduced temperature cycling. Two push pin anchors securely attach heatsink for vibration resistance. | PLUG AND PLAY USB WIFI: Get a no-hassle WiFi dongle that offers great performance and feature set including AP mode, ad-hoc mode, monitor mode, packet injection, and more. It is fully integrated into the Linux kernel and is perfect for embedded applications that require low power consumption, memory usage, and software support. | ADDITIONAL PERIPHERALS REQUIRED: MicroSD card or eMMC flashed with the correct image. Proper bootloader or image is required to have HDMI video output. The green LED will turn on once the bootloader is detected. Please use a 5V 2A or higher MicroUSB power supply. Power supplies with insufficient power will experience voltage drops that cause instability and random application crashes or boot issues. For additional assistance, please use hub.libre.computer for guides and end-user support. | PERIPHERAL COMPATIBILITY: Most USB based peripherals are directly supported. The GPIO header maintains the same layout for hardware I2C, SPI, PWM, and UART compatibility. I2S, PCM, and SDIO do not share the same pins so most audio peripherals will need to be re-routed. Le Potato features additional GPIOs and SARADC pins on separate headers. | RASPBIAN COMPATIBILITY: Software made for Raspberry Pi is not compatible out of the box. Libre Computer provides the libretech-raspbian-portability tool on GitHub to convert existing Raspbian images to standard EFI images so that they can run on Libre Computer boards. Pre-converted Raspbian images are also available. Non-standard software libraries for interfacing with hardware will need to be updated since GPIO numbering are not the same across different platforms. | SUPPORT OPEN-SOURCE: Libre Computer is a major sponsor of software contributions to upstream Linux and U-Boot including support for adopted Allwinner, Amlogic, and Rockchip SoCs. For technical support, please use hub.libre.computer.

EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications. | LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios. | QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+. | NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance. | MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100°C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.

ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC. | INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market. | QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection. | MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor). | TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results.

EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications. Heatsinks increase the surface area for heat transfer but still requires temperature gradient to be effective. | LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 4 Model B. Double-sided thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios. | QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT v2 for Raspberry Pi 4. | MAXIMUM FREQUENCY FOR LONGER: Maintain 1.5GHz for more than a minute before throttling kicks in. That is 5x longer than without a heatsink. Decrease idle temperatures by 20°F for longer component life and more reliable operation. | MUST HAVE FOR RASPBERRY PI 4: The SoC and USB 3.0 bridge require heatsinks since they exceed 50°C. Other components like LPDDR4 and gigabit PHY are best passively cooled since they are near components with higher z-height that may short circuit. Please attach the heatsinks as pictured to avoid accidental damage to the Raspberry Pi 4 Model B board.

ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 4: Deliver clean and reliable power to the latest Pi 4! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 4 Model B sold separately. | GALVANICALLY ISOLATED POWER OVER ETHERNET UP TO 3KV: Designed for IEEE 802.3af, IEEE 802.3at, and Passive DC 48V network switches and power sourcing equipment (PSE). The professional model features galvanic isolation for applications with non-IEEE 802.3 compliant switches and power injectors that do not provide PSE side isolation. | BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 4 Model B boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market. | VENTILATED CASE WITH COOLING FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B must be adequate to ensure performance and stable operation. | EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+.