Triple shoe mount. Aluminum alloy manufacturing. | The shoe mount is connected by hot shoe mount or 1/4"-20 screw. | This shoe mount allows the same time use of multiple shoe rack accessories, such as microphones, flash lights, led video lights or monitors. | swivel damping-The knurled knob is equipped with a rubber patch to protect your shoe rack accessories from being scratched. | The multifunctional shoe mount is a special camera phone accessory for vlog dv video shooting.

【Full-cage Rig】 For Sony A7III (Alpha 7 III) /A7RIII /A7R3 /A7M3(Alpha 7R III /A7R Mark III / ILCE-7RM3) DSLR camera protective cage kit. It includes a cage, an arri-type locating rubber top handle. | 【Multi-installation Point Design】The top of the cage has buit-in 2 cold shoe mount, arri-type hole,3/8 inch and 1/4 inch thread array. The magic arm, flash, EVF bracket, handle, and microphone can be installed on the top of the cage. There are also a large number of screw holes on the cage, such as standard arri-type hole ,3/8 inch and 1/4-inch threaded arrays, other accessories can be installed. | 【Double Locking】The camera is firmly fixed on the rack, through the bottom 1/4 screw and the right M2.5 screw, there are 2 rubber pads at the bottom to prevent scratches or damage to the camera.Notes: This M2.5 screw is only suitable for Sony A7III /A7RIII /A7M3 cameras. | 【Arri-type locating top handle 】 Handle with detachable positioning pin, which can change direction.The handle can be directly installed on Arri-type hole/cage .The handle grip is rubber, non-slip design, comfortable grip, light and strong, with 3 cold shoe mount on the handle, multiple 1/4 and 3/8 screw holes, other accessories can be installed. | 【Aluminum alloy】Made of black anodized aluminum, strong and sturdy.

【For BMPCC 4K & 6K 】Not for BMPCC 6K Pro!!!!! For the New BlackMagic Pocket Camera 4K & 6K New Version.The camera cage kit contains a cage, a NATO top handle , a SSD holder, a HDMI cable clamp and a 15MM rod clamp. Allow access all the buttons, no block LED screen , battery, card slots, expansion ports. | 【Multiple Mounting Interfaces .】The cage is equipped with multiple 1/4'' and 3/8'' screw holes.Built-in NATO rail on the top and left and right sides. Built-in a cold shoe on the top of the cage. Allow you to mount more accessories.in addition,the top and bottom are locked camera with 1/4" screws, there are additional locating pins and rubber pads on the bottom plate to prevent twisting and scratching. | 【 Top NATO Handle 】The top of the handle has built-in 2 cold shoe and an Arri locating hole , allow to mount microphone, flash, monitor, etc. The handle can be adjusted back and forth to provide a comfortable grip. | 【T5/T7 SSD Mount Holder】The SSD card clamp dedicated to the installation of Samsung T5/T7 SSD, Compatible with SanDisk SSD, for Bmpcc 4K /6K/6K PRO camera.In addition,comes with a standard cold shoe adapter, which is convenient for you to install the SSD on the cold shoe mount of the camera cage. | 【HDMI Cable Clamp】The HDMI cable clamp protects the HDMI cable from being impaired or damaged, keeps the signal stable.It is fixed on the camera cage with 1/4"-20 screws.And, the bottom of the cable clamp is equipped with rubber gasket to protect the camera cage from scratches. | Notes：The Cage Dimensions: 193 x 75 x 115mm. Not Work for Black Magic Design Cinema Camera 6K / Blackmagic Design Cinema Kamera 6K (BM-CINECAM60KLFL) !!!!! This Camera Dimensions:180 x 112 x 122mm

MagicRig Cage Kit only for BMPCC 4K & 6K(Not for BMPCC 6K Pro & 6K G2, Not for BMCC 6K Full Frame). This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. | Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. | Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. | T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. | It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories .The handles are easy to transport and offer more convenience for low angle shooting.

MagicRig Cage Kit only for BMPCC 4K & 6K(Not for BMPCC 6K Pro & 6K G2, Not for BMCC 6K Full Frame). This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. | Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. | Multiple mounting interfaces.This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. | T5 SSD holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. | It consists of a cage with a Top handle and a T5 SSD holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories.

Fits for BlackMagic Pocket Camera 4K / 6K Version.This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. | Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. | Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. | Multiple Uses - This cage features a built-in NATO rail on the top and left and right sides, allowing you to quickly release accessories with NATO fixtures, or install a NATO handle for handheld shooting, perfect for single or dual Handheld.

Fits Blackmagic Design Pocket Cinema Camera 4K & 6K(Not for 6k pro & 6k g2 !!!). This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. | Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. | Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. | It consists of a cage and a top handle. You can also attach a microphone or flash through the cage and the cold shoe on top of the handle. | Multiple Uses - This cage features a built-in NATO rail on the top and left and right sides, allowing you to quickly release accessories with NATO fixtures, or install a NATO handle for handheld shooting, perfect for single or dual Handheld.

【Installation】MAGICRIG cage kit only for BMPCC 6K Pro / 6K G2. It secures to the camera via a 1/4’’ screw on the top and two 1/4'' screws on the bottom to prevent wiggles, and comes with rubber pad at the bottom to protect the camera from scratching. | 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port. | 【Multiple mounting points】The MAGICRIG cage with abundance of 1/4’’ and 3/8'' thread holes and for ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc. | 【Top Handle】This camera handle can be attached to a camera cage top with 2pcs 1/4'' screws. The handle is made by aluminium alloy, is very sturdy and solid. | 【NATO Rail】The cage comes with built-in NATO rail that allows you to quickly release accessories with NATO clamp. Mounting MAGICRIG SM-321 wooden side handle for handheld shooting.

Protective DSLR camera cage kit for Sony A7RIII /A7III /A7M3. It allows enables shooting at multi-angles and can be handheld easily. | This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.It has a number of threaded holes along the top, bottom, side and front for attachment mounting. And provides 1/4"-20 and 3/8"-16 auxiliary threads throughout the aluminum alloy construction. | Double locking - The cage equipped with a threaded hole that matches the eyelet and secures the M2.5 screw to the eyelet to prevent the camera from deflecting and accidentally falling during shooting. NOTE: M2.5 screws are not compatible with A7RII/A7II cameras | The Top of the cage features 2 cold shoes, 3/8'' and arrays of 1/4'' threads. Two lens adapter ports fits lens adapter support to better sustain the weight of heavy lenses.Magic arm, flash light, EVF mount, handle, microphones can be installed on top of the cage. | This camera cage fits perfectly into the body.It allows to mount HDMI-compatible cable clamp to protect HDMI-compatible port. Right strap port, allows to mount strap.This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.