Includes rear window defroster; comes complete with wire harness and antenna extension to run to trunk; uses factory heater and a/C controls; | Ford; Taurus 1998-1999; Mercury; sable 1998-1999; | Aftermarket stereo Installation dash kit | Install dash kit for Single DIN/ISO Radios | Compatible 1996 - 1999 Ford Taurus and Mercury Sable | Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit | Includes rear window defroster button | Includes wire harnesses and antenna extension, Use factory radio spring clips to mount radio, Uses factory heat and A/C Controls

Fits Most Models Of Dodge, Chrysler & Plymouth Through 2004 As Well As Select Ford & Jeep Vehicles | Includes Corner Support Components That Eliminate The Flexing Or Rocking Of The Kit That Has Been Experienced With Other Kits On The Market. Special design accommodates DIN and removable-face DIN radios | 1974 - 2003 Chrysler/Dodge/Plymouth/Ford Single Din Installation Kit | Radio Side Support Provided By Metra(R) "Side Arm Support System" | Made in USA | For 1974-97 Chrysler, Ford, and Jeep

Install dash kit for Single/Double DIN/ISO Radios | For Lexus ES300/ES330 vehicles.Wiring and antenna connections (sold separately) : TYTO-01 Toyota Amp Interface Harness | Includes a storage pocket below the radio for single DIN mounting | Accommodates ISO single DIN mount | Made in USA

Installation Dash Kit for Double DIN Radios | For 1999 - 2002 GM Full-size Trucks and SUV' s: Models with message center in the factory instrument cluster | Accommodates Double DIN mount | Designed and manufactured with precision tolerances | Gapless fit between the dash and the kit. No custom fabrication work is required

Factory Antenna Cable to Aftermarket Radio Receivers | For select Honda and Acura vehicles | Fits Into Factory Plug

Antenna Cable to Aftermarket Radio Adapter | For select 2007-Up Infinity/Nissan vehicles | Fits Into Factory Plug | OEM style

Factory Antenna to Aftermarket Radio Adapter | For select 1988-2005 Audi/BMW/Mercedes vehicles | Factory antenna with flat plug to aftermarket radio | A capacitor is included to match impedance | Some newer European radios also have capacitors that do not allow this adapter to work properly (try using 40-VW12)

Plugs into car harness. METRA Crown Victoria/Grand Marquis Marauder/Expedition (Late Production) 03 Turbowire 705520 | Power/4 Speaker | 24-pin connector | For select 2003-2007 Ford, Lincoln, Mercury vehicles | Allows for the installation of an aftermarket radio using the existing factory wiring and connectors

Ford/Mazda speaker harness | Will retain both mid-range and tweeter speakers (if applicable) | Both speakers can be wired individually or together | Sold as Pair | Secure fit

Install dash kit for Double DIN/ISO Radios | Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit | Painted to match factory dash color | High-grade ABS plastic construction | Factory style texture | Included Components: Double Din Brackets, Double Din Trim Plate, Spacers, Screws (3), Speed Clips (3) | Install dash kit for Double DIN/ISO Radios | ISO Stacked Radio Provision, Easy to use Instructions, High Grade ABS Plastic, It is compatible with Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac and Isuzu Select Models | Painted to Match Factory Dash Color | Factory style Texture | Designed and Manufactured with Precision Tolerances, Resulting in a Gapless fit between the Dash and the Kit

Provides pocket with recessed mounting of a | Uses ISO DIN radio using Metra patented ISO quick release brackets | Made in USA.Uses ISO DIN radio using Metra patented ISO quick release brackets

Speaker Harness Sold In Pairs | Compatible with select Ford Models (See description below) | For the Installtion of Aftermarket Speakers

Factory navigation antenna adapter to Fakra connector. | For Alpine, JVC, Kenwood, and aftermarket navigation radios. | 6" in length.

Universal FM Stereo Modulator | 2-Channel Frequency Settings for a Clear Signal | Allows a Connection to any Head Unit that Doesn't Offer a Controller or Auxiliary Input | Retains the Radio Frequencies Which are Still Received Through the FM Antenna | Durable Metal Case Allows a Safe Installation Behind the Dash or Below the Dash of the Vehicle

Side/top Mount Split Ball For 1" Opening | 14" Removable Black Conductive Rubber Mast With 54" Cable | 44-us07r/aw-us07r/cf-us07r/ck-us07r | 1"/25mm hole | Removable black conductive rubber mast

Plugs into car harness at radio | Power 4 speaker | This product is manufactured in china | 17" Tuner relocation bypass harness and Bose amplifier integration harness | Retains factory Bose system | Includes antenna extension | 21-pin plug ; enter year, make,model to check compatibility. | Allows for the installation of an aftermarket radio using the existing factory wiring and connectors

package height :1.778 cm | package length :20.828 cm | package width :9.652 cm | Product type :PET_FEEDER | 24-Pin plugs into car harness at radio | For 2000 Chevy Tracker, Metro, and Prism

Included components: AUTO_PART, Automotive Accessories, Lighting/Electrical, automotive-electrical-wiring-harnesses | Compatible with select 1986-2000 Ford vehicles | 12" Long factory amplifier integration harness for select Ford vehicles | 4 RCA Plugs plug into the aftermarket radio's pre-amp outputs | One 8-pin plug and one 8-pin speaker plug | 1.5K Ohm resistor can be used on the amp-remote wire to eliminate turn-on pop

Included Components: Wire Harness | Includes antenna extension and adapter 15 feet long | This product is manufactured in china | Connects aftermarket radio to factory speaker harness | Product type :CAR_ELECTRONICS

Wiring Harness for Select Ford Vehicles with Premium Sound | One 8-pin power plug and one 16-pin speaker plug | For radios 35 watts or less | OEM Style | Allows for the installation of an aftermarket radio using the existing factory wiring and connectors | For 1996 Ford Explorer and Ranger speakers

Plugs into car harness at radio | Powers speaker | 2009 Hyundai or Kia | Power/4-speaker | Plugs into car harness at radio | Power/4-Speaker | Plugs into car harness at radio | One 16-pin plug and one 20-pin plug | Works with factory Infinity amplified systems | Compatible with select 2009-up Hyundai/Kia Vehicles

Must use at least a 4-volt preout radio | Allows installation of aftermarket radio | Uses existing factory wiring & connectors | No cutting of factory wiring is needed | Amplifier Integration Harness | Designed for Select Nissan Vehicles with a factory amplifier | Compatible with premium sound system | Have RCA connections for amplifier integration, Radio must have at least a 4V preamp output | For use in 2007 and up Nissan vehicles with premium audio

6-1/2" - 6-3/4" Speaker Adapter Plate | For 1998-2013 Harley Davidson Touring vehicles | Designed and manufactured with precision tolerances | Gapless fit between the speaker and the kit | Included components: Speaker Connector, Manual

Comes with three different mounting faceplate depths: flat 1/2 inch and 1 inch | Can | ISO | mount a radio at any of the three faceplate depths | Made in USA | Includes 3 faceplates | Includes rear support bracket | Designed to use factory radio brackets | If factory radio brackets are missing, use 02-4544

Mazda USB Adapter to Retain the OE USB in Select 2013-Up Mazda Vehicles w/ Aftermarket Stereos | Connects directly to OEM USB port and aftermarket stereo | Retains charging capabilities | Radio utilizes rear USB input | 1 foot in length

A true performance product | Quality assured | Designed with the user and installer in mind | Tested for function in a real world environment | Secure fit

A true performance product | Quality assured | Designed with the user and installer in mind | Tested for function in a real world environment | Secure fit

A true performance product | Quality assured | Designed with the user and installer in mind | Tested for function in a real world environment | Secure fit

A true performance product | Quality assured | Designed with the user and installer in mind | Tested for function in a real world environment | Secure fit

A true performance product | Quality assured | Designed with the user and installer in mind | Tested for function in a real world environment | Secure fit

To be used with IBLED-5MRGB-3 | RF Controller for IBLED-5MRGB-3 LED Lights | Allows 2-5 Meter Rolls to be Connected | Control Box has Same Functions as Remote

Provides accessory (12 Volt 10 Amp) | Retains R. A. Tpu (retained accessory power) | Used in non-amplified systems or when replacing amplified system | Provides nav outputs (parking Brake, reverse, and V. S. S. ) | Prewired aswc-1 harness included (aswc-1 not included)