The Metal 52 ac supports 2.4 GHz, 5 GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4 GHz and 802.11 ac/n/a for 5 GHz) | The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless | The Metal comes with an AP software license, so you can attach your favorite antenna to use it as an AP, to make wireless point-to-point links or as a CPE | Includes a Dual Band 2.4/5 GHz Omni directional antenna (6 dBi 2.4 GHz, 8 dBi 5 GHz) | 720 MHz CPU nominal frequency, RouterOS L4, 64 MB RAM, 16 MB Storage Size, Passive PoE (PoE in), 6 dBi Antenna gain for 2.4 GHz/5 GHz, 1x 10/100/1000 Ethernet ports

This Mikrotik small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. | The Mikrotik device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. | Mikrotik hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. | The Mikrotik hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network. | Mikrotik Dual chain wireless 2.4GHz / 650MHz CPU / 64MB of RAM / Passive PoE output on port 5 / USB port for 3G/4G modem.

This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports | Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware | S+RJ10 module is supported also on devices with passive cooling, but may require an extra cooling | Connector: RJ45; Data Rate: 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps; Distance: up to 200m | Size of RAM: 0 KB; Storage size: 256 KB; Storage type: FLASH; Tested ambient temperature: -20 celsius to 60 celsius

The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit | The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides | The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner | Dimensions: 129 x 129 x 34 mm, Size of RAM: 256 MB, Storage size: 16 MB, PoE in: Passive PoE, PoE in input Voltage: 10-28 V | Wireless 5 GHz number of chains: 2, Wireless 5 GHz standards: 802.11a/n/ac, Antenna gain dBi for 5 GHz: 16, 10/100/1000 Ethernet ports: 1

Antenna: 2.4GHz 10dBi | CPU: QCA9533 - 650MHz | Memory: 64MB RAM, 16 MB Flash | Ethernet: One 10/100 Ethernet port | OS: MikroTik RouterOS, Level3 license

The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna | Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount | The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner | The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle | The device includes one 10/100 Mbit ethernet port. There is also an easily accessilble grounding connection to protect it against lightning

wAP 60G AP (RBwAPG-60ad-A) 60 GHz Base Station with Phase array 60° beamforming Integrated antenna | The wAP 60G AP is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors in different scenarios - Base Station, Point-to-Point or CPE | The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors | wAP 60G AP supports up to eight simultaneous clients on distances of 200m+ | Specifications: 716 Mhz CPU, 256 MB RAM, PSU and PoE, RouterOS L4, 185 x 85 x 30 mm Dimensions, 802.3af/at PoE in

Wireless: 5 GHz 802.11a/n/ac dual-chain, 2.4 GHz 802.11b/g/n dual-chain | CPU Quad-core IPQ-4018 716 MHz | RAM 128 MB, Storage 16 MB flash | Supported bands LTE | Modem for International / USA bands 3, 7, 20, 31, 41n, 42 and 43.

Mikrotik wAP ac LTE6 kit RBwAPGR-5HacD2HnD&R11e-LTE6-US Wireless Dual-band Access Point with 2x Gigabit Ports and CAT6 LTE Modem (US Version) | The wAP ac LTE6 kit also known as RBwAPGR-5HacD2HnD&R11e-LTE6 is an upgrade of our extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on the popular weatherproof wAP form factor | Its new CAT6 LTE modem enables even greater download speed - up to 300 Mbps. CAT6 also enables carrier aggregation and allows the device to use multiple bands at the same time | It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside | wAP ac LTE6 kit has two Gigabit Ethernet ports - you can use the device as a wired router with LTE backup via the Micro SIM slot and enjoy smooth wireless experience anywhere - indoors or outdoors

The wAP ac also known as RBwAPG-5HacD2HnD is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch, or anywhere else where you need a capable wireless connection | The new revision features 2x Gigabit Ethernet ports, enhanced wireless antenna performance, more RAM, and a powerful quad-core CPU | Strong dual-chain dual-band 2.4/5 GHz wireless for concurrent coverage will solve most interference issues in a crowded environment | This is a must-have these days! You can use the 2.4 GHz channel for older devices and the 5 GHz channel for everything else since this frequency is less cluttered | The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case. The bottom part can also be secured with a special anti-vandal screw

The wAP is a small weatherproof wireless access point for your mobile devices | The wAP is perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. | The wAP RBwAP2nD has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek | The wAP is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it's mounting location. | It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.

The BaseBox2 also known as RB912UAG-2HPnD-OUT is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture | Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem | The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door | Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit | PoE in: Passive PoE, Wireless 2.4 GHz number of chains: 2, Wireless 2.4 GHz standards: 802.11b/g/n, 10/100/1000 Ethernet ports: 1, Number of SIM slots: 1 Modem (Mini SIM), MiniPCI-e slots: 1, Number of USB ports: 1

If you are managing networks in a large, busy area (like a park or a stadium), then you have probably experienced all kinds of problems - massive interference, signal loss during bad weather, etc | Wireless Wire Cube also known as CubeG-5ac60adpair is a kit of two pre-paired devices that form a blazing fast AES encrypted wireless connection. Pure plug-and-play: just point the Cubes at one another and power them on | The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. It features an automatic 5 GHz backup connection, so you don’t have to worry about any downtime | No need for additional configuration - the 5 GHz backup connection works out-of-the-box. The Cube will take care of your connection at all times | It can easily cover a distance of 800 meters and reach fiber-like speed. The box includes two Cube 60G ac devices that are already paired together, power supplies, PoE injectors and mounting kits for both devices

Wireless Wire (RBwAPG-60adkit) by Mikrotik offers fiber speed and quality for a fraction of the price | It replaces your Gigabit ethernet cable with two small devices that connect to each other over a 60 GHz wireless link | The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 200 meters or more | The box includes two wAP60G devices that are already paired together, a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors | 716 MHz CPU nominal frequency, 256 MB RAM, 16 MB Storage size, 802.3af/at PoE in, 1x 10/100/1000 Ethernet ports

The Wireless out of band management USB stick (Woobm-USB) is a useful assistant for any network administrator | Simply plug it into any RouterBOARD USB port and it will allow you to access the console of that device over wireless | It sets up as a wireless access point and has a simple web interface where you can access a fully featured terminal interface to configure your router, and where you can configure the Woobm itself | It can even work as a wireless client: if you wish to manage many devices, just connect all the Woobms to one AP inside your server room and manage the routers through there | Other useful features include it’s ability to discover neighboring RouterOS devices and ability to Telnet directly from your PC to the host console of the Woobm

RBD52G-5HacD2HnD-TC MIKROTIK HAP AC2