Weather resistant blended fabric exterior with thick rubber Tread on bottom of the Bag prevents wear | 20mm thick internal foam padding covered with plush Micro-Fleece lining and adjustable, removable Three-Point interior padding system protects the headstock, neck and Body | Large front zippered pocket with flap, features G-Hook Buckle and Seatbelt loops for multiple Con-nection points allowing you to fill the pocket to capacity and still secure it | Padded comfort grip carry handle and removable, color matched backpack straps | Interior Dims: Body Length: 20" Body height: 3.5" lower bout width: 14" middle bout width: 12" upper bout width: 12" overall Length 41.5"

Gator Cases Soft Cotton, Triple-Layered, Singing Mask in Size Medium | Adds Space Between Mouth and Interior Front Wall of Mask for Proper Breathing | Bending Nose Wire & Adjustable Elastic Straps for Improved Fit and Comfort | Made to Meet the Recommendations Set Forth by the NFHS’ Performing Arts Aerosol Study | Product Dimensions (Folded): 6.25”/159mm (L) x 6”/152mm (W), Net Weight: 0.1 lbs./0.04 kg

Holds Electric or Acoustic Guitars, Ukuleles and Violins | Finish Friendly Rubberized Cradle Padding | Adjustable For Smaller Instruments | Compact Design. Folds Flat when not in use | Heavy Duty Steel Construction

Fits Electric Guitars, Acoustic Guitars, and Bass Guitars | Rubberized Swivel Yoke to Properly Cradle Guitar Neck | Sleek Black Standoff Provides Clearance for Both Straight and Angled Headstocks | Satin Chrome Decorative Wall Plate Hides Mounting Hardware for Clean and Stylish Look | Safe for standard polyeurethane finishes, not recommended for vintage/lacquer finishes

Holds (2) Acoustic or Electric Guitars | Finish Friendly Rubberized Cradle Padding | Durable Neck Restraint | Red Safety Trim On Feet (Removable) | Heavy Duty Steel Construction

Adjustable Guitar Stand Holds (1) Acoustic or Electric Guitar | Finish Friendly Rubberized Cradle Padding | Durable Neck Restraint | Red Safety Trim On Feet (Removable) | Heavy Duty Steel Construction

Desk-Mounted Broadcast Microphone Boom Stand for Podcasts & Recording | Spring-Loaded Articulating Arm with 2. 4 lbs. /1. 1 kg Max Weight Capacity & 38. 6“/980mm Max Extension | Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness | Black Powder-Coated Steel Construction with Metal Coil Springs | Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models

Rotates Full 360-Degrees with Minimal Noise | Fixed, Internally Guided 10’/3. 05m XLR Cable Included | Spring-Loaded Articulating Arm with 4. 4 lbs. /2 kg Max Weight Capacity & 32. 25”/940mm Max Extension | Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness | Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models | Exterior Dimensions: 20. 50”/520mm (L) x 4. 75”/120mm (W) x 2. 50”/64mm (H), Net Weight: 3. 4 lbs. /1. 54 kg

Desk-mounted Broadcast microphone boom stand for podcasts & recording | Includes Fixed XLR cable included for clean look & organization (10 ft long) | Full 360-degrees rotation adjustment with minimal noise | spring-loaded articulating arm with 2.60 lbs./1.18 kg weight capacity & 38.5"/97.79 cm Max extension | Easily mounts to desks, tables & similar-sized surfaces 2.17"/5.51 cm Max in thickness | 70mm mic threads at boom end | Black powder-coated steel construction with Metal coil springs

Pair of (2) desktop studio monitor clamp-on stands | 12"/305mm x 9"/229mm speaker platform with soft, EVA-lined surface | Clamps to desktop surfaces 2. 25"/57mm in thickness. | Fits most small-sized studio monitor speakers both vertically and horizontally. | Product Dimensions: 13. 5"/353mm (L) x 12" /305mm (W) x 3. 5" /89mm (H), Net Weight: 5 lbs. /0. 45 kg, Weight Capacity: 60 lbs. /27. 23 kg

Pair of (2) desktop studio monitor stands; All required hardware is located in Box 1 | 12"/305mm x 9"/229mm speaker platform with soft, EVA-lined surface | (4) rubber feet on 10' x 10" base for stability and sound absorption. | Fits most small-sized studio monitor speakers both vertically and horizontally. | Product Dimensions: 14"/356mm (L) x 12"/305mm (W) x 10"/254. . (h), Net Weight : 8. 6 lbs. /0. 45 kg, Weight Capacity: 60 lbs | All required hardware is included in Box 1; If missing please reach out to [email protected]

Constructed of solid Steel | Adjustable to Desired Position | Threaded Male and Female End Connector | Flexible 13" Long Neck | Black Finish

Guitar Player Stool with Integrated Guitar Stand on Rear-side | Easily Folds for Compact Travel | Integrated Footrest for Comfortable Playing Position During Performances | Rubber feet with Red Saftey Trim for Visibility in Dark Settings | Max Weight of 250 lbs./113.4 kg ; Product Dimensions: 36”/914mm (L) x 14”/356mm (W) x 5.5”/140mm (H), Net Weight: 9 lbs./4.08 kg

Guitar performance seat with built-in guitar stand. Holds acoustic, Electric and bass guitars | Collapsible design with quick release pin for compact storage | Durable, padded seat cushion with removable ergonomic backrest | 300lb weight capacity | Some assembly required, Hardware included

Guitar performance seat with built-in guitar stand. Holds acoustic, Electric and bass guitars | Collapsible design with quick release pin for compact storage | Durable, padded seat cushion with removable ergonomic backrest | 300lb weight capacity | Some assembly required, Hardware included

Angles Amp Up Towards User for Improved Listening & Easier Access to Controls | Folds Completely Flat into Compact Size for Easy Transport | Reduces Sound Transfer into Floor by Lifting Amp from Ground | Max Weight Capacity: 50 lbs/22. 7kg | Product Dimensions (folded): 25“/635mm (L) x 12. 5“/317. 5mm (W) x 1. 25“/31. 8mm (H)

Lightweight Durable Mic Stand Utility Tray | Highly Adjustable clamp allows for clamping on to mic stand up to 1.38" | Vented Drink holder included | Included Pick Tab holds up to (5) Guitar Picks | Overall Surface 12" X 7" (307 x180mm)

Lightweight, durable extra-large microphone stand utility tray | Perfect to hold keys, phone, drink, picks, capo, slide or other accessories | Adjustable clamp allows attachment to various stands | Fits tubing up to 1.38" diameter (35mm) | Includes guitar pick holder for up to five (5) guitar picks | Built-in, 3" deep drink holder | Overall surface of 14" x 9" (355.6mm x 228.6mm) | Raised edge all the way around to prevent items from rolling off | 10 lbs. weight capacity

Small Microphone Stand Clamp-On Utility Shelf | 9” x 9” Surface Area | Great for Holding Small Accessories Like Capos, Harmonicas, and Cell Phones with Raised Lip Around Edges to Prevent Items from Sliding Off | Fits Tubing Up to 40mm | 10lb Weight Capacity | Steel Construction with Black Powder Coated Finish

Lightweight Collapsible Desktop Microphone Stand | Clip Included For Most Wireless Microphones such as Shure PG58, Sennheiser SKM 100-835, 825, Behringer Ultralink and more | Great For Remote Podcast Interviews | Compact Size

Includes Removable 10‘/3048mm XLR Mic Cable to Accommodate Most Studio Mics | Built-In LED Indicator Light Ring with Brightness Control & Red/Blue/Violet Color Modes | Easily Clamps or Mounts Directly to Desks, Tables & Similar-Sized Surfaces 2.17”/55mm Max in Thickness | Rotates Full 360-Degress with Minimal Noise with Multiple Knobs for Securing Mic at Desired Angle | Spring-Loaded Articulating Arm with 4.4 lbs./2 kg Max Weight Capacity & 32.25”/940mm Max Extension

Short microphone stand | Collapsible tripod base | Max height: 42 inches /1066mm | Includes telescoping boom | Cable management included

Short Microphone Stand With A Compact Base | Max Height: 23 Inches / 584 mm | Includes 16" Single Section Boom | Base Weighted For Balance And Stability | Cable Management Included.Base Type: U-shape | 4.5" X 8" Weighted Base

Fits Electric Guitars, Acoustic Guitars, and Bass Guitars | Rubberized Swivel Yoke to Properly Cradle Guitar Neck | Sleek Black Standoff Provides Clearance for Both Straight and Angled Headstocks | Cherry Finish Decorative Wall Plate Hides Mounting Hardware for Clean and Stylish Look | Safe for standard polyurethane finishes, not recommended for vintage/lacquer finishes

Fits Electric Guitars, Acoustic Guitars, and Bass Guitars | Rubberized Swivel Yoke to Properly Cradle Guitar Neck | Sleek Black Standoff Provides Clearance for Both Straight and Angled Headstocks | Maple Finish Decorative Wall Plate Hides Mounting Hardware for Clean and Stylish Look | Safe for standard polyurethane finishes, not recommended for vintage/lacquer finishes

Padded Mixer or Equipment Bag with Rugged Nylon Exterior | 10mm Dual Layer Padded Protection and Protective Tricot lined interior prevents scratches | External storage pockets, with cord management, for cables, small accessories and power supplies | Removable shoulder strap & comfortable webbed handles for easy transport | Interior Dims: 15.5" x 15"x 5.5"

Cold Rolled Steel Threaded Rack Rails | 3mm Thick with Black Powder Coating | 2 Rack Rails per package | Rack Unit Numbers Printed on Rails | Available in 4U, 6U, 8U, 10U and 12U rack spaces

Cold Rolled Steel Threaded Rack Rails | 3mm Thick with Black Powder Coating | 2 Rack Rails per package | Rack Unit Numbers Printed on Rails | Available in 4U, 6U, 8U, 10U and 12U rack spaces

Cold Rolled Steel Threaded Rack Rails | 3mm Thick with Black Powder Coating | 2 Rack Rails per package | Rack Unit Numbers Printed on Rails | Available in 4U, 6U, 8U, 10U and 12U rack spaces

Cold Rolled Steel Threaded Rack Rails; 4U Rack Size | 2 Rack Rails Per Package | 3mm Thick with Black Powder Coating | Rack Unit Numbers Printed on Rails

Cold Rolled Steel Threaded Rack Rails | 3mm Thick with Black Powder Coating | 2 Rack Rails per package | Rack Unit Numbers Printed on Rails | Available in 4U, 6U, 8U, 10U and 12U rack spaces

Cold Rolled Steel Threaded Rack Rails | 3mm Thick with Black Powder Coating | 2 Rack Rails per package | Rack Unit Numbers Printed on Rails | Available in 4U, 6U, 8U, 10U and 12U rack spaces

Cold Rolled Steel Threaded Rack Rails | 3mm Thick with Black Powder Coating | 2 Rack Rails per package | Rack Unit Numbers Printed on Rails | Available in 4U, 6U, 8U, 10U and 12U rack spaces

Black 10/32 Rack Screws | 100 Pack | Plastic Washer Included

Black 10/32 Rack Screws | 25 Pack | Plastic Washer Included | Package Weight: 0.091 kilograms

7 strand, pre-tinned easy to solder, highly workable | Push back cloth sleeve does not require cutting just push and solder | 3 feet each of black & white cloth wire | Accurate vintage-style push back cloth wire

Essential: To secure your mic so that it’s easily extended during use, eliminating the need to re-hang on clip. No more fumbling around trying to hang your mic. Just grab your mic, use it, let it go…It retracts back up to the headliner. | Trusted Brand: With over 20 years of experience, Hammerhead Industries is the name you can count on! Gear Keeper features retractable tethers to suit every need. If you have any questions, let our team know. | Retractable Tether: Designed for your CB Radio Microphone. Ensures your microphone is easy to find and use! Keeps your mic right where you need it; not swinging into your head or dropping on the floor like bungie cords. | Comfortable Retraction Force: Offers 9oz retraction force with a 28” extension, it provides reliable security without fatiguing the driver! You can comfortably use your CB mic with minimal drag, pull or dangle. | Ease of Use: Includes D-ring for easy mounting to existing screw in headliner, visor or radio mount. Also includes adjustable lanyard to hang mic at right level for best access.

STURDY CONNECTORS - Heavy duty metal connectors give you confidence that your cables will be handled safely and securely each time after repeated use. | CLEARER SIGNALS - It is made from 99.9% pure copper, giving it excellent conductivity and clarity when sending data to your lights or controller. | UNIVERSAL COMPATIBILITY - using the 3 Pin connector, can be used in lighting, sound, and special effects applications in high performance installations. | PROFESSIONAL STANDARDS - our high-quality cable have a low impedance of 110 ohms is designed for long-lasting reliability and maximum distance. | BEST SIGNAL PERFORMANCE - supports long runs and will keep you from having issues with signal loss as our cables have Shielding to isolate any interference.

STURDY CONNECTORS - Heavy duty metal connectors give you confidence that your cables will be handled safely and securely each time after repeated use. | CLEARER SIGNALS - It is made from 99.9% pure copper, giving it excellent conductivity and clarity when sending data to your lights or controller. | UNIVERSAL COMPATIBILITY - using the 3 Pin connector, can be used in lighting, sound, and special effects applications in high performance installations. | PROFESSIONAL STANDARDS - our high-quality cable have a low impedance of 110 ohms is designed for long-lasting reliability and maximum distance. | BEST SIGNAL PERFORMANCE - supports long runs and will keep you from having issues with signal loss as our cables have Shielding to isolate any interference.

24K plated connectors ensure optimum sound quality, Low noise resistance is perfect for digital or analog devices | 15000+ bending test, protect the most vulnerable point of the cable. Premium Aluminum housing and double braided nylon adds the durability and a tangle free cable connection | 23AWG Oxygen-free copper (OFC) core offers very low capacitance that provides superior signal conductivity and enhanced sound | Widely used in the installation of mixers, amplifiers, microphones, effectors, decoders, equalizers, electronic organs, electric guitars, electric bass, and other electronic equipment | We stand behind the performance of all of our products and want to make sure each customer is satisfied with their purchase. If you are not happy with the product for any reason, we offer a simple return policy and exceptional customer service. All of our products are backed with our top rated lifetime warranty