Please note black is Alloy Steel and Silver is Stainless Steel; Please verify all the information carefully and choose correct thread and correct height for your saddles | Three metric thread heights are available, 6mm/8mm/10mm. Metric screws are used for most guitars made outside of the USA (Most MIM guitars used metric screws as well) | Three US thread heights are avialable, 1/4",5/16" and 3/8"; USA thread screws are used for most American series, American Vintage series and American Standard series manufactured before 2008 (from '86-'07) which made in USA | Metric or US thread used on a variety of vintage and contemporary models | Package contains 50x hex set screws and an Allen Wrench

Please note black is Alloy Steel and Silver is Stainless Steel; Please verify all the information carefully and choose correct thread and correct height for your saddles | Three metric thread heights are available, 6mm/8mm/10mm. Metric screws are used for most guitars made outside of the USA (Most MIM guitars used metric screws as well) | Three US thread heights are avialable, 1/4",5/16" and 3/8"; USA thread screws are used for most American series, American Vintage series and American Standard series manufactured before 2008 (from '86-'07) which made in USA | Metric or US thread used on a variety of vintage and contemporary models | Package contains 50x hex set screws and an Allen Wrench

Binding Strip dimension: about 1650mm * 5mm * 1.5mm (Length*Width*Thickness) | Material: ABS Plastic; Great Replacement for Your Broken, Dirty or Old Guitar Binding. | Used for Acoustic Guitars or Classic Guitars; Please be sure to verify the dimensions before you order the item | Please contact us first before leaving feedback if you have problem with the item, after sale service is very improtant as well so we will try our best to resolve your problem as soon as we receive your message!

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing | Thickness is about 1.6mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

This Pickguard fits USA/Mexican Standard Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup hole; Made of plastic; The pickguard has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

Abalone Pearl with Black Bracket | Two Screw Holes Distance: about 138mm; The Neck Pickup space width: about 46.5mm; The Bridge Pickup space width: about 45mm; The Space between two Pickups: about 57mm | Pickguards are made of plastic with protective films on surface; Bracket is made of Metal | Fits most Epiphone Les Pauls made in China/Korea;Do not fit Gibson Les Pauls made in USA | Package includes pickguard and bracket with screws

Aged White 3 Ply with Chrome Bracket | Pickguard is made of Plastic; Bracket is made of Metal | The pickguard only fits Standard Epiphone Les Pauls, it do not fit Gibson Les Pauls

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic, it has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

This Pickguard fits USA/Mexican Vintage 5 Hole Fender Telecasters,but not Fender Squier Teles or other types of Teles.If you have other types of Teles,you may need to make a little modification to let it fit | Important note: there are no mounting screw holes for the pickup; Pickguard is made of plastic, it has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

15:1 Tuning Ratio | These are aftermarket tuners, not direct replacements for Kluson Tuners, and the size is different with original Kluson tuners | Post diameter: 6mm (String through Post); Bushing diameter: 9mm | Plate overall length: 102mm; Center to center distance between posts: 35mm | Distance between mounting screw holes: 31mm x 35mm x 27mm

Made of Metal | Dimension: 35.1 x 34.9 (mm); Screw holes distance from center to center: about 25 x 25.4 (mm); Central hole diameter: 10mm | Curved Bottom for most Gibson Les Pauls; Please be sure to verify the dimensions carefully before you order the item | Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message | Package includes: 1x Jackplate with screws

15:1 Tuning Ratio; Vintage Split Shafts and comes with bushings,screws | Fits for 8.5mm smaller vintage tuner holes, but not modern 10mm tuner holes; Please be sure to verify the diameter of your tuner holes before you order the item | Quality tuning keys with faultless finish, not cheap and inferior tuning keys; If your headstock has 10mm tuners holes, you can order the correct Conversion Bushings in our other listing to finish installing | Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message | Package includes: Set of 6 Guitar Tuning Keys with bushings and screws

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion

Fully Loaded Control Plate with Wiring Harness; Everything is pre-assembled for quick and easy installation | Control Plate Dimension: 160mm * 34.2mm; Two mounting screws distance from center to center: 149mm | Flawless Finish; Imported 3-Way Switch with Black Tip; 250K Pots with .022µF Capacitor | KAISH only makes quality and competitive parts; This loaded control plate is built to clean up your tone and let the full quality of your pickups shine through. A great upgrade to polish and improve the tone of a cheap guitar | Due to the wide variety of parts and guitars, please verify the diemnsions to confirm the item is compatible with your guitar before ordering

This Pickguard set only fits Yamaha Pacifica guitars older 112 and 012 models,but not other types of guitars.If you have other types of guitars,please be sure to check the dimensions carefully to confirm whether the set can fit without any modification | Pickguard is made of plastic,it has plastic films which should be peeled off after installing | Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied a little different thickness) | Due to the wide variety of pickguards in the market,please be sure to verify the dimensions carefully before you order the item | Free pickguard mounting screws are included

Pickup Height screws are metric thread which can fit most (not all) Epiphone pickups or most humbucker pickups made in China | 4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter) | Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China | Important Note: Please be sure to confirm the thread type of your pickups before you order the item, you may not be able to find the correct screws if you don't know the thread type of your pickups | These are just after market pickup screws, so the screws and springs may not be exact same with your original screws and springs; We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies

Made of Metal,not Plastic; Finish is faultless | Bottom is flat, not curved | Outer Size: 35.2mm x 35.2mm; Screws Distance: 25.2mm x 25.2mm | Please check the dimension to confirm it will fit your guitar before you order the item | Package includes: 1x Jackplate with screws

Handle Length: 218mm; Handle Width: 30mm | Metric M5 Screws Dimensions: Length 25mm; Head Diameter 6.93mm; Thread diameter 3.92mm; M5 Nut Dimension: Outer diameter 5.5mm; Height 8.05mm | Handle Screws & Nuts fit our Amplifier handles perfectly, suitable for replacing the old and broken Amplifier handles, easy to install | Easy to carry and storage, easy to use, good performance | Package includes: 1x Amplifier Handle, 4x Mounting Screw Kit, 4x Fixed Metal Plate

Mounting Screws: Made of Stainless Steel; Nuts: Made of Metal; | Metric M5 Screws Dimensions: Length 25mm; Head Diameter 6.93mm; Thread diameter 3.92mm; M5 Nut Dimension: Outer diameter 5.5mm; Height 8.05mm | Quality AMP Handle Nuts and Screws; Fit our Amplifier handles perfectly | Suitable for replacing the old and broken Amplifier handles, easy to install. | Package includes: 20x Mounting Screws, 20 x Nuts

Made of plastic | Fits for most strat style guitars

Color: Gold with New Zealand Abalone Top (Abalone top is a natural material so knob to knob do have variations) | Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots; But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots; Please be sure to check the diameter of your pots before ordering.obs DO NOT fit large USA 1/4"(6.35mm) diameter pots(such as USA CTS Pots) | Material: Metal | High quality set screw knobs with faultless finish; Allen wrench for Set Screw is included | Please be sure to verify the diameter of your pots as well as the dimensions of the knobs before you order the item

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion

KAISH high quality aftermarket pickguard with stainless steel bracket for most Gibson Les Paul guitars made in USA; Do NOT fit Epiphone Les Pauls | Right size pickguard, right size bracket, #3 x 3/8" Phillip Oval Head steel screws, #6-32 x 5/16" Phillip Flat Head bolt and #6-32 steel hex nut for direct change on most Gibson guitars | Pickguard is made of plastic with thickness 2.2mm (+/- 0.2mm error), bracket is made of stainless steel(SUS 304) with thickness 1.3mm(+/- 0.1mm error). Pickguard has two plastic protective films which should be peeled off after installing | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion | Solid bracket and steel mounting screws; Never rust with stainless steel material, high corrosion

Soprano Scale | Mahogany Body | 12 Bass Frets | Walnut Fingerboard and Bridge | Mahogany Neck

Hard Case f Concert-sized Ukuleles with Plush Interi | Adjustable Shoulder Straps - Black | Interi Accessy Compartment | Exteri Accessy Pocket

Kala’s KA-15S came into the world in 2005 as the answer to a high-quality, affordable, entry-level ukulele and still remains the unrivaled ukulele in its class. | The KA-15S is well-suited for classroom use, practicing, and acoustic performance. It is the instrument of choice for schools - More people learn to play on a Kala than any other ukulele brand | A very traditional Mahogany Soprano Ukulele in a satin finish with a bright, warm, full-bodied tone. | Comes with a beautiful Walnut Fingerboard and Bridge, Mahogany Neck, 12 Brass Frets, GraphTech NuBone and Aquila Super Nylgut Strings from Italy and distinguished by its etched Polynesian-style Shark Teeth rosette | Kala ukuleles are played by some of the most renowned players around the world including: twenty one pilots, Vance Joy, dodie, EatMyUke, The Ukulele Teacher, and Zac Brown. | SOPRANO UKULELE – This is the most common size of ukulele, and the smallest, with the shortest scale length and tightest fret spacing – tuned G C E A

The Kala Mahogany Series Ukulele offer a full-bodied tone with plenty of Sweet Highs and Mellow Lows that combine for a full rich sound | The Kala KA-15S Mahogany Soprano Ukulele offers a fresh approach to ukuleles. The KA-15S has a Mahogany top, back and sides | This Soprano Ukulele pumps out a lot of sound despite its diminutive size, and the all-mahogany construction delivers a tone that is bright, yet warm with enough volume that you will be heard while playing with a group | Kala Soprano ukulele A satin finish gives the KA-15S Ukulele an antique, well-played in feel. Guitar players will appreciate the low action and the ease of playability. ukulele kit ukulele package | Soprano Ukulele kit A set of die-cast tuning machines complete this attractive package included Case Ukulele kit Play Ukulele Cheap ukulele Ukulele parts sopranos complete series aquila soprano ukulele beginners ukulele student ukulele kala ka15s best ukulele for beginners best soprano ukulele

Soprano size | Mahogany body and neck | Walnut fingerboard | GraphTech NuBone nut and saddle | Black satin finish

Industry Standard | Mahogany Neck and Walnut Fingerboard | Soprano Uke with Satin-Finished Mahogany Back/Sides and Spruce Top | GraphTech Nubone XB Nut and Open-Geared Tuners | Does not include case

Satin Mahogany Tenor Ukulele | Top, Back, Sides, and Neck: Mahogany | Satin Finish, Walnut Fingerboard | GraphTech NuBone Nut and Saddle | Aquila Super Nylgut Strings

Huge Accessory Pocket | 12mm of Padding | Black Cordura material | Adjustable Shoulder Strap | Fits Concert Ukuleles

Mahogany body | 18 Silver Nickel Frets | Rosewood Fingerboard and Bridge | Mahogany neck | Lightweight Shadow Active NANO-FLEX EQ System

Injection molded body | Agathis wood top | Rosewood fingerboard and graphite bridge | Mahogany neck | 12 brass frets

Tenor size | Mahogany body and neck | Walnut fingerboard | Cream binding | Built-in Kala UK-300-TR electronics

Soprano Scale | Mahogany Body | 12 Bass Frets | Walnut Fingerboard and Bridge | Mahogany neck