【Triple Suction Cup Car Mount Kit】 This triple suction cup car mount is an ideal tool for capturing immersive and unforgettable footage on the road. Three suction cups, two connected by a NATO rail, form a stable triangular structure and provide reliable support for your device. Note: Before use, please thoroughly clean the suction cup and the contact area and make sure all screws are securely tightened | 【Reliable Vacuum Suction Strength】 Each ø3"/74mm suction cup features a vacuum pump for powerful suction on car hoods, windshields, roofs, or other smooth surfaces. The pump has a white marker indicating the suction status-secure when hidden and loose when visible | 【Double Telescopic Extension Poles】The carbon fiber extension poles can extend up to 24"/60cm. The robust carbon fiber construction ensures a high 2.2lb/1kg load capacity. Flexible tilt movements enable versatile camera angles, while a 0.95"/24mm oval clamp ensures secure connections | 【Quick Release NATO Rails/Clamps】 Suction cups and extension poles are assembled via quick release NATO rails and NATO clamps for an efficient and secure setup | 【Universal Action Camera Adapter】 The included action camera mount adapter accessory of this suction cup car holder stand on windshield inside outside is compatible with GoPro Hero 13 12 11 10 9 Black Go Pro Max; compatible with Insta360 X4 X3 X2 Insta 360 Ace Pro Go 3; compatible with DJI OSMO Action 5 Pro 4 3 2 compatible with AKASO Brave 8 7 4 and other action cameras as content creator essential photography gear and influencer must have

【Low Profile Ball Head】 Fully compatible with NEEWER LITETRIP tripods, the φ40mm low profile ball head lowers its gravity for increased stability and supports a load up to 22lb/10kg, and allows greater flexibility for unique angles and perspectives. With a bottom 3/8" threaded hole, the ball head mount can also be attached to other tripods, monopods, sliders, etc. | 【Quick Lock Dual Compatibility QR System】 The camera ball mount features the Arca type QR plate and the clamp base that are also compatible with Peak Design Capture Camera Clip V3 backpack strap clip mount and the plates, facilitating swift device switching between a tripod and backpack strap with the side quick lock button. Note: The QR clamp is only compatible with PD QR plates and included plates | 【360° Swivel & 90° Tilt】 The panoramic ball head with a single U notch design for 360° rotation and 90° vertical shooting in a flexible yet stable way, with a flip lock for quick, easy switch between portrait and landscape modes. Precise scale markings on the head with a locking knob for more accurate and smooth horizontal movement | 【Multiple Mounting Threads】 The top 1/4" screw on the tripod head is compatible with mini DV camcorders, DSLRs, mirrorless cameras, telephoto lenses, sliders, smartphones, and more. A built in bubble level on the QR clamp base helps check the stability after each adjustment | 【Lightweight & Portable】 Engineered with premium CNC machined aluminum alloy, the tripod ball head ensures durability and high performance under different circumstances. Measuring 3.4" x 2.9" x 2.4" / 86 x 73 x 61mm and weighing just 9.7oz/275g, it easily fits in your pocket, and carry it with ease wherever you go, perfect for outdoor or filming on the go

【Expansion with 2 Sections】 NEEWER tripod boom arm, length 35" to 61" (89 to 155cm). Attach the boom arm to the light stand and easily adjust 180° swivel to get the perfect angle for your shooting needs (NOTE: Light Stand is NOT Included) | 【Humanized Design】 The top with flat design could fix the light better. The long locking knob and foam handle at the bottom enable the photographer to adjust the overhead boom arm with great ease and lock it tight in position. | 【Premium Material】 The extendable aluminum alloy boom has a maximum length of 61’’ and can be rotated up to 180° for adjustment. Separate tilt, pan and arm lock knobs. The boom also comes with a stainless steel 1/4" threaded screw for connecting other devices. | 【Strong & Sturdy】 Rugged aluminum structure and locking system, with counterweight and sandbag, could easily achieve load capacity up to 5kg to meet the shooting needs. Note: the sandbag comes empty. | 【Wide compatibility】 The universal boom arm is a great support for most photographic devices like softbox, umbrellas, strobe/flash light and reflector etc. Perfect for indoor and outdoor use.

【Compact and Portable】 Measuring only 2.91"/74mm in height, this compact fluid head is lightweight (10.93oz/310g) and has a 1.46"/37mm diameter base. Including all knobs, the entire tripod fluid head boasts an all-metal design, with a textured feel and is more durable. | 【360° Panoramic Rotation & -55°to 90° Tilting】 The fluid head provides smooth movements and fixed friction damping. Equipped with the aluminum alloy tilt locking knob, pan locking knob, and the handle, you can easily rotate the head 360° or tilt it from -55° to 90°. Perfect for multiple angles photography. | 【Quick Release Plate with 1/4" Screw】 The quick release plate compatible with Arca Swiss is easy to install and remove. Attach the plate to your camera and quickly mount it on a tripod if needed. Equipped with an larger area of non slip rubber pad and two fall prevention screws on either side to ensure your equipment is mounted securely. | 【Detachable Handle】 Use the included L shape Hex key to detach and install the handle for left hand or right hand operating. And it is magnetically attached to the fluid head for easy removal. | 【Wide Compatibility】 Compatible with digital SLR cameras, mirrorless cameras, compact video cameras, and more. The maximum load capacity of the fluid head is 6.6lb/3kg.

【Ball Base for Quick Leveling】The integrated leveling bowl allows precise one step adjustment of lens orientation within +10°/-10° angles for quick leveling of your camera on a variety of uneven terrain surfaces. This tripod head also includes a bubble level for easier double checking | 【Mini Size Yet Heavy Duty 】Standing 3.66"/93mm high with a 37mm diameter mounting base and weighing only 13oz/370g, this tripod head is lightweight and portable. It features a rugged aluminum alloy build that can support a maximum load of 8.8lb/4kg, ideal for travel vlogging recording, landscape photography and videography, live streaming, portraits, and more | 【360° Pan & -55°/+90° Tilt】The fluid head provides smooth movements, a scaled pan base, and fixed friction damping. You can rotate the head at 360° or tilt it from -55° to 90° with the handle grip for a panorama shoot or video recording, perfect for multiple angles photography | 【Detachable Telescopic Handle】The telescopic handle with 2 sections can be extended to an ideal length from 14.5cm/5.7" to 24cm/9.5" for comfortable and convenient operation. Use the hand tighten locking knob to install the handle on either side of the fluid head for left or right handed use | 【Standard 1/4" Arca Type QR Plate】Compatible with the Arca Swiss QR system, you can mount the plate to the camera with the top 1/4" screw, and then slide the camera into the professional fluid head to quickly switch between handheld and tripod shooting. The 3/8" 1/4" threads on the bottom support mounting on various tripods and sliders, and more. Compatible with Sony Canon Nikon and other DSLR cameras

【Tripod Leveling Base with Bowl Adapter】 The tripod leveling base features three short support pillars that provide up to +/-9° leveling adjustments with thumb screws. The integrated bowl adapter additionally allows for up to +/-10° quick leveling with simply a twist. The built in bubble levels help check the camera level at a glance and always keep it straight. The bottom 3/8" threaded hole can be attached to a tripod, monopod, slider, etc. | 【Significant & Fine Tuning Adjustment】 With two thumb screws on each short pillar, the camera base for tripod allows for substantial or precise height adjustments from three different angles. The counterbalance system with damped friction control ensures stable and smooth adjustment for the desired angle and composition | 【Wider Compatible 3/8" Screw】 The top 3/8" screw is for mounting ball heads, pan and tilt heads, fluid heads, gimbal heads, geared heads and other tripod heads, compatible with Sony Canon Nikon and other DSLR cameras. The nonslip rubber pads add stability and prevent your accessories or equipment from scratches | 【All Metal Build】 Made of aircraft grade aluminum alloy with black anodized CNC machining treatment, the professional leveling base is robust and built to last, and confidently supports 33lb /15kg with ease | 【Lightweight & Portable】 Measuring 4.1"x3.4"x2.5"/105x86x63mm and weighing 9.1oz/259g, the camera leveler is portable for transport and compact for storage

【Tripod Leveling Base with Bubble Level】 The tripod leveling base features three short support pillars that provide up to +/-9° leveling adjustments with thumb screws. The built in bubble levels help check the camera level at a glance and always keep it straight. The bottom 3/8" threaded hole can be attached to a tripod, monopod, slider, etc. | 【Significant & Fine Tuning Adjustment】 With two thumb screws on each short pillar, the camera base for tripod allows for substantial or precise height adjustments from three different angles. The counterbalance system with damped friction control ensures stable and smooth adjustment for the desired angle and composition | 【Wider Compatible 3/8" Screw】 The top 3/8" screw is for mounting ball heads, pan and tilt heads, fluid heads, gimbal heads, geared heads and other tripod heads, compatible with Sony Canon Nikon and other DSLR cameras. The nonslip rubber pads add stability and prevent your equipment from scratches | 【All Metal Build】 Made of aircraft grade aluminum alloy with black anodized CNC machining treatment, the professional leveling base is robust and built to last, and confidently supports 33lb /15kg with ease | 【Lightweight & Portable】 Measuring 3.7"x3.5"x2.4"/95x89x60mm and weighing 7.3oz/208g, the camera leveler is portable for transport and compact for storage

【Precise Angle Adjustment】 NEEWER LP64 Leveling Base with triple wheels allows you to precisely adjust the angles of your camera and tripod head in a range of -/+5° for keeping the level straight on uneven surfaces. Each wheel comes with a thumb screw to secure the angle | 【3 Inbuilt Bubble Levels】 Three inbuilt bubble levels in different orientations help you easily and accurately level the camera and achieve beautiful photographs and videos of any style | 【Universal Compatibility】 The 3/8” mounting screw and the 3/8” tripod socket are compatible with a great variety of photographic equipment. The 3/8” screw at the top can connect tripod heads and video heads with quick release plates. And the bottom 3/8” thread with a 1/4” to 3/8” adapter can attach the leveling base to tripods, monopods, and sliders of any kind | 【Premium Construction】 Made of aircraft grade aluminum with black anodized CNC machining treatment, the leveling base is robust and built to last. The nonslip rubber pad on the top prevents the base from slipping and enhances stability | 【Lightweight Yet Powerful】 Weighing only 7.4oz (210g), this leveling base is portable for transport and compact for storage. With a load capacity of 33lb (15kg), it can mount heavy equipment with reliable security

【Flexible Movement with Panoramic Head】 Featuring 360° panning scale with precise calibration and pan lock, this tripod head supports panoramic photography while securing your camera to a tripod. The swivel ball head easily tilts for different angle shooting, whether vertical, horizontal, or overhead. | 【Easy to mount】 With a 3/8" screw hole on the bottom for mounting on a tripod or monopod, coupled with a 1/4" to 3/8" screw adapter, the tripod head can easily fit all models of tripods and monopods | 【Standard Quick Release Plate】 The tripod ball head comes with a standard quick release plate for broad compatibility. Removable QR plate with 1/4" screw on top for DSLR cameras or camcorders. It is quick to mount or remove your device | 【Upgraded Design 】 The locking knob is located on the side of the ball head instead of the bottom of the head, which lowers the center of gravity of the ball head by a further 15%, creating a stronger locking force and better stability | 【Strong & Durable】 The maximum load capacity of the tripod head is 11lb/5kg. Made of aluminum alloy, the tripod head is stable and durable

【Tripod Leveling Base with 12° Up and Down Tilt】Featuring a -12°/+12°tilting design, coupled with 360° panning movement, the NEEWER tripod leveling head offers more stability and provides flexible shooting angle, especially for overhead shots. A locking knob quickly secures the camera in place, and a tightening screw keeps the camera firmly attached | 【Inbuilt Bubble Level】 An integrated bubble level helps you align your camera with the horizontal line instantly and effortlessly, enabling smooth and accurate leveling on your tripod and light stand | 【Sturdy Construction】 Made of CNC-machined, black anodized aluminum alloy for corrosion-resistance and enduring durability. Load up to 11lb / 5kg. Perfect for outdoor photography and easy to carry | 【Wide Compatibility】 1/4” mounting screw is compatible with Canon Nikon Sony DSLR cameras and more, mirrorless cameras, and camcorders | 【Convertible Threads】 With a 1/4”-20 to 3/8”-16 adapter, the bottom tripod socket can work with an extensive range of light stands and tripods. An L-shaped hex key is also included for easy assembly

【-15°/+15° Fast Leveling】 This leveling base lets you smoothly and accurately level the camera within -15°/+15° or pan it 360° on uneven surfaces. An upgraded screw knob quickly secures the leveling base, and an L shaped hex key allows you to further lock the mounted device by tightening the hex screw | 【Integrated Bubble Level】 An integrated bubble level helps you align your camera with the horizontal line instantly and effortlessly | 【Reinforced Construction】 Made of black anodized aluminum alloy with CNC precision machining for enduring durability and easy portability, ideal for outdoor photography and videography. Nonslip rubber pads protect against scratches | 【1/4" to 3/8" Screw Adapter】 With a 1/4" to 3/8" thread adapter, the tripod head leveling base with 60mm diameter can work with an extensive range of tripods, monopods, and camera sliders. A screwdriver is included | 【Universal Compatibility】 The top 1/4" screw with a 1/4" to 3/8" screw adapter is compatible with numerous tripod ball heads, video fluid heads as well as DSLR cameras, video cameras, action cameras, and vlogging cameras for quick leveling. Maximum load capacity: 22lb/10kg

Photography Backdrop Stand Kit: This kit includes one retractable backdrop stand, two crossbars, 6 clamps, and one carrying bag. The crossbars can be connected with a length of 59"/150cm-suitable for hanging one big backdrop or two small backdrops on its two sides. The crossbar measures 1"/2.54cm in diameter and is strong and durable. When used alone, the crossbar holds a small collapsible light reflector | Stable & Adjustable Light Stand: Made of high-quality metal, the light stand is strong enough for frequent use. The 3-leg support design provides stability. Use the height adjustment knob to easily adjust the light stand height from 41.4"/105cm to 102.4"/260cm. The diameter of each section of the light stand is 1"/0.9"/0.75" (25mm/22mm/19mm) from bottom to top | 6 Strong Spring Clamps: The included six super-strong clamps offer better performance than most other backdrop holders, providing a firm grip. Durable, the clamps are designed for repeated and can be used with a multitude of accessories | Convenient to Use: The top 1/4" screw of the stand allows you to connect the crossbars or a ball head or other compatible shooting equipment. The backdrop support stand is easy to assemble and disassemble. Easily store the stand in the carrying bag and take it to the studio | Wide Range of uses: Use this backdrop support stand kit to hang a backdrop, background panel, light reflector, and more. Ideal for TikTok videos, photo studio shooting, selfies, live broadcasting, video interviews, portrait photography, and product photography

This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted. | It can install NIKON SC-28 Flash Sync Cord to VH2 Camera Flash Bracket Grip. It can install YONGNUO CTR-31P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket. | This adapter can pile up two camera. | Material: anodized aluminum metal | 2 pack of 1/4" tripod screw to flash shoe mount adapter

【Universal Camera Cage Rig】 As one of the camera accessories for stable shots, it’s compatible with Sony a7C ZV-E1 ZV-E10 zve10 ZV-1 ZV-1F alpha a7 iv a7s III a7siii a7R V a7rv a9 II rx100 vi a5000 a6400 a6700 6600 Canon R50 R10 R7 R6 mark ii R5C R5 R3 90D EOS R8 Nikon Zfc Z9 Z8 Z7 Z7II Z6 Z6II Z30 Fujifilm X-20S X-T4 X-T5 Panasonic gh6 lumix s5 s5iix Blackmagic 4K 6K bmpcc 6k pro and other DSLR cameras. Note: It is not suitable for a lens with a tripod collar mount ring, remove it before use | 【Top Handle with Silicone Grip】 The included NEEWER CA007 Camera Top Handle with a 3/8" ARRI Locating thumbscrew attaches firmly to the camera cage, providing a stable handheld video shooting experience with its contoured silicone grip. It also features 4x 1/4" threads, 2x 3/8" ARRI locating holes, and 3x cold shoe mounts for monitor mounts, magic arms, LED lights, microphones, and more | 【Secure Camera Mount Installation】 A 1/4" screw and a 1/4" countersink slot on the cage base enable safe and flexible camera installation. Magnetically stored flat screwdriver for easy tension adjustment, nonslip silicone pad for stability and protection. Multiple 1/4" threads, cold shoe mounts, and 3/8" locating holes for ARRI standard can accessorize your rig with more gadgets like magic arms, microphones, ball head adapters, and LED video lights. Compatible with rode wireless go 2 II microphones | 【Dual Grips & Tripod Mounted】 The two ergonomic hand grips with synthetic leather texture and finger contours offer you a comfortable and firm grip on the cage for handheld shooting, or mount it on a tripod head via the 1/4" screw holes on the bottom, for seamless switching between handheld and tripod shooting, thanks to its Arca type base | 【Solid & Lightweight Build】 CNC machining and lightweight aluminum handle and cage provide accurate alignment and full camera access. The top handle weighs 5.1oz/145g, supports up to 22lb/10kg, while the cage as a camera holder weighs 22.9oz/650g and can hold equipment or accessories up to 33lb/15kg. Black anodized finish ensures outdoor durability. For video recording, vlogging, YouTube/TikTok filmmaking, studio filming, videography, for video movie makers, social media content creators, etc.

【Upgraded Wireless Control】The slider remote is upgraded to be compatible with both the older generation and the newest generation of NEEWER Motorized camera slider, including the VS-80WC/VS-100WC 2.4G motorized camera slider and the ER1 series App controlled motorized slider (ER1-120, ER1-100, and ER1-80). Get one now to pair with your NEEWER slider to achieve easy control | 【Multifunctional 2.4G Slider Control】Featuring 2.4G stable wireless connection, the slider control supports video camcording and time lapse photography. The upgraded version of 2.4G slider remote also supports setting A/B point, adjustable internal, exposure time, fixed shots, number of shots, and delay. App controlled slider’s remote supports manual mode with adjustable interval, exposure time, frame and video length as well | 【Pairing Steps】Without requiring a firmware upgrade, the App controlled slider line (ER1-120, ER1-100, and ER1-80) and the newest generation of 2.4G control slider VS-80WC/VS-100WC can be paired with the remote by following these steps: 1. Long press the On/Off key and camera key; 2. Turn on the motor switch; 3. The indicator light flashes rapidly in red and green; 4. Pairing is completed | 【How to Upgrade the Older Generation of Slider to Use the Remote】This 2.4G remote control can work with the older generation of 2.4G VS-80WC/VS-100WC slider, but a firmware update of the sliders is required first before pairing: Click Upgrade Firmware and Software, select NEEWER 2.4G Wireless Motorized Camera Slider VS-80WC/VS-100WC to download the firmware in NEEWER, and check the firmware for the upgrade method Upgrade Instructions | 【Rechargeable Remote Control】Unlike traditional remotes that are powered by disposable batteries, this upgraded slider remote is designed with a USB Type C charging port. Quickly charge the remote by connecting to a wall charger or a portable charger with DC5V/1A output

【Upgraded Dimmable RGB Light】With upgraded cooling and lighting control system (constant 50W lighting, no flicker or color shift), the 660 PRO II RGB breaks the minimum brightness limit from 1% slight bright (brightness and power can reach a true 1%) to 100% ultra bright, as well as 3200K-5600K color temperature and 360° full RGB range, all ensuring smooth and precise adjustment. Power and brightness remain consistent when adjusting hue/color temperature | 【Creative Special Scenes】 CRI97+, illumination up to [email protected], these RGB lights come with 360° full color lighting to enhance your filming background and 9 preset scenes to help create magical video content: Police Car, Ambulance, Fire Truck, Fireworks, Party, Candlelight, Lightning, Paparazzi, and TV Screen. Whether you plan to make an inspiring short film, set a mood on live streaming and broadcasting, or need a flawless complexion for Zoom calls, you can always count on it | 【Smart Wireless App Control】 The Bluetooth enabled video lights support smart app control. Download the “NEEWER” app on your smartphone and use it to control one light or several lights all together by selecting channels (1-8/ALL) from up to 49’ (15m) away, and save two favorite lighting presets. Operating system requirements: Android 4.3 or later/iOS 11.1 or later | 【Dual Power Options & Great Heat Dissipation】 The aluminum alloy panel mechanism ensures better heat dissipation and prolongs the working hours. The lights can be powered in two ways: AC adapter (included) when shooting indoors, or NP-F550 NP-F970 li ion battery power supply (battery not included) for on the go photography. A carrying bag is also included to carry and store all items in the kit | 【Stable and Flexible Stand Support】 Two light stands in the kit provide stable support for the LED video lights, adjustable height from 3'/92cm to 6.6'/200cm. A U shaped bracket holds the light while connecting it to the stand. Capable of tilting 180° on the bracket, the 660 PRO II RGB light allows for flexible lighting angles. The four way barn doors help modify the beam angle, a removable diffuser brings a delicate and stunning lighting effect

【Easy Height Adjustment】 This telescopic light stand with 3 sections offers a 34"-75" (86-190cm) height range for flexible gear positioning. Tighten the knobs for reliable security. Section joints are reinforced for added durability | 【Universal Mount Screw】 The 5/8" spigot fits most stand mount adapters, and the 1/4" screw tip is compatible with a broad variety of devices of up to 13.5lb/6.5kg | 【Spring Loaded Design】 The spring loaded base can protect the equipment from impact damage when loosening the light stand, allowing for quick and easy stand folding and unfolding | 【Collapsible Metal Stand】 Made of sturdy stainless steel for both studio and outdoor creation. Fold it down to 2.3ft (71cm) for easy storage and transportation | 【Unlimited Application】 For different light fixtures and photography equipment, including ring lights, LED panel lights, strobe flashes, and backdrops

【Carbon Fiber Travel Tripod】This camera tripod is strongly built with sturdy carbon fiber material for photography and videography. The thickened 28mm in diameter columns are capable of holding camera equipment weighing up to 26.5lb/12kg with optimal stability to prevent shaking. Its center column comes with an extra hook to hang sandbags for camera accessories balance and greater stability (sandbags not included) | 【Easily Convertible Tripod/Monopod】The professional tripod/monopod in one design comes in handy for outdoor shooting, especially well suited for travel photography. When feeling tired, quickly remove the center column, detach one tripod leg, and connect them together for a make shift alpenstock or walking stick, ranging from 22.2”/56.5cm to 83.8”/213cm in height. A carrying bag also included for easy travel vlogging | 【Extended Height with 2 Center Axes】Featuring 2 sections of telescopic center column, coupled with 4 sections of telescopic tripod legs, the video tripod reaches 80.7"/205cm in height at its maximum. With quick release twist locks, easily adjust the tripod to a desired height, minimum height 26.8"/68cm. The center column can also be inverted for low angle shooting and macro photography | 【360° Swivel Ball Head for Panoramic Shots】The portable photography tripod comes with a larger than average 36mm ball head that swivels 360 degrees to provide for flexible filming angles while keeping your camera stable. 2 locking knobs enable precise control over camera movement for panoramic filming. The included 2 bubble level help keep the horizon straight | 【Wide Compatibility with 1/4” Screw】The travel tripod is designed with a 1/4” quick release plate and 3 extra 1/4” screw holes, widely compatible with Canon Nikon Sony DSLR camera, camcorders, sports camera, and mirrorless camera, cellphone holder with 1/4" threaded screw hole (phone holder not included), and more. The carbon fiber build makes it compact and lightweight. Easily carry the tripod around for on the go photography

【Upgraded Bi Color Light Stick Kit】 This is a 2 pack kit designed for photographers and studio photography. Color filters in red, yellow, and blue change the light colors and provide you with creative effects. Each light stick offers 3200K~5600K color temperature, a 0~100% dimming range, high CRI of 97+, 21W power, 105 warm LEDs, and 105 cold LEDs. Ideal for YouTube video recording, vlogging, gaming, live streaming, portrait, and product photography | 【2.4G Remote & Group Control】 Upgraded remote control employs 2.4G transmission for wireless control within 66’ (20m). It also allows users to adjust color temperature and brightness and put the light into standby mode with one press. The remote can control multiple lights set on the same channel. By setting the remote control on Channel 88, you can control all of the lights on any channel and get diverse effects for all types of shooting. Note: Only one remote control is included. | 【Light Stand & Handheld Operation】 The light stick is 23.6"/60 cm long (including the handle). With a stand mount adapter, you can mount the light stick on an included light stand and adjust the height between 2.3’ and 6.6’ (70cm and 200cm). The handle is for handheld use and enables flexible lighting angles. It can tilt at 180° for multiple fill light angles and be secured by the locking knob. A big carrying bag holds the whole kit and makes it portable for outdoor shooting | 【Dual Power Supply Options】 Connect the light stick to a wall socket with the power adapter and receive AC power for nonstop indoor use. Moreover, you can insert one NP-F battery (not included) into the battery plate and enjoy cordless outdoor lighting. The LCD screen displays your settings and remaining battery level | 【Durable Aluminum Alloy Shell】 Upgraded from plastic to aluminum alloy, the outer shell resists impact damage and scratches and has better heat dissipation performance for a longer lifespan. The filter slot makes it easier to install and remove the filter and prevents it from dropping

【Multiple Flash Modes】 NW635II-C Speedlite features TTL, manual, S1/S2 optical slave modes, stroboscopic flashes, flash exposure compensation, 1-1/128 adjustable output, 3.5s recycle time, 1/300s-1/20000s flash duration, and 5600K±200K neutral daylight. GN58 (ISO 100, 180mm) guide number allows lighting from long distances | 【Transmitter/Receiver Set】 FC-16 transmitter/receiver set allows you to wirelessly trigger flashes on Speedlites and studio monolights, and wirelessly activate the shutter release button to take photographs. Set the transmitter and receiver on the same channel for easy operation | 【Flexible Bounce Angles】 Flash head can swivel up and down between -7° and 90° and rotate 270° to get natural photos with fewer shadows at multiple shooting angles. Included diffusers create diffused and balanced flash distribution along with diverse effects | 【Lightweight & Portable】 Power the flash with four AA batteries (not included) or four nickel metal hydride batteries (not included). This lightweight flash can directly attach to the camera via the hot shoe and slide into the case for safe storage while on the go. A lens cap holder always keeps the lens cap at hand | 【Compatible Models】 Compatible with Canon EOS R6 R5 R3 R M6 850D 800D/T7i 760D/T6s 750D/T6i 650D 600D 7D Mark II 7D 6D Mark II 6D 5D Mark IV/III/II 1D Mark III 1DX 550D 500D 450D 90D 80D 70D 60D 50D 1100D 77D SL3/250D T7/1500D 2000D T100/3000D 4000D

【Versatile Camera Arm Desk Mount Stand】 NEEWER TL253A+MH022 Desktop Stand Kit is an ideal live broadcast solution for video recording, live streaming, video conferencing, podcasting, and gaming with DSLR/mirrorless cameras, LED video lights, microphones, webcams and can turn your streamer desk into a small personal studio | 【Sturdy Trifold Flexible Holding Arm】 This boom arm attaches to the stand via ø0.9"-1.1"/22-28mm clamp and supports devices up to 2lb/0.9kg which can hold your different devices firmly. It extends to 28"/70cm and folds to 8"/20cm for storage. Articulated joints allow 360° rotation, a Phillips screwdriver is included for tension adjustment. Note: When the arm is installed on the stand, please loosen the clamp before adjusting stand height | 【3 Section Tabletop Stand with C Clamp】 The stand can firmly fit over a desk up to 3.5"/9cm thick with the C clamp. 3 telescopic sections offer a 24"-47"/61-120cm height adjustment that lets you position the device overhead or at eye level. Reinforced with larger tube diameters (1.1"/28mm, 1"/25mm, 0.9"/22mm), the stand can stabilize equipment up to 8.8lb/4kg in weight | 【360° Rotatable Ball Heads】 Ball head adapters can mount DSLR cameras, mirrorless cameras, phone holders, webcams, LED video lights, and other devices with a 1/4" thread. They enable 360° rotation and 90° tilt for free angle setups. 1/4" to 3/8" and 1/4" to 5/8" screw adapters are including for mounting dynamic microphones, condenser microphones, mic clips, shock mounts, and more | 【Universal Phone Holder】 Designed for most smartphones, the 2.4"-4" (6-10cm) adjustable phone holder is compatible with iPhone 15 Pro Max 15 Plus 14 Pro Max 13 12 Samsung Galaxy S23 Ultra S22 Huawei Honor and other smartphone models

【Multifunctional Professional Flash Trigger】 The upgraded QPRO-C TTL wireless flash trigger is powerful and fully supports TTL automatic flash, flash exposure compensation (FEC), 1/8000s high speed sync, stroboscopic flash, manual flash, magnification function, group modeling lamp control, group zooming, single point triggering, and simultaneous output value adjustment for all groups | 【Single Point Triggering】Enter C.Fn SHOOT via the MENU button to start single point triggering with the trigger mounted on cameras for fast continuous shooting. Note: Only triggers flash under M/Multi Mode, not for parameter adjustment. The 1/8000s high speed synchronization allows for faster shutter speeds and ideal for fast moving subjects, and supports a focus assist light that automatically lights up under dim light when the camera is unable to focus | 【Built In 2.4G Wireless Q System】 Wirelessly trigger NEEWER Q4 Q3 Z1-C Z760-C NW420-C NW655-C NW665-C S101-300W/400W PRO thanks to the built in NEEWER wireless Q system, or control other flashes without a Q system using a NEEWER QR receiver and a 2.5mm sync cord (all sold separately). Also remote control via 2.4GHz stable connection for flashes up to 5 groups, 32 channels, and 01-99 ID settings, and set them all on the same channel and ID settings to tigger without signal disturbance | 【Screen Magnification Function】 The flash trigger features an LCD ultra large high definition display screen where up to five flash groups are shown at one time. Double click the group button quickly to switch from the setting page of all groups (A-E) to the enlarged view of the settings and related details of the corresponding group. The five group buttons, four function buttons, and a scrolling wheel makes parameter settings clear, intuitive, and easy to use | 【Wide Compatibility】 The QPRO-C flash trigger can be quickly fixed on the camera with the metal hotshoe. Compatible with Canon EOS R6, R5, R3, R, M6, 850D, 800D/T7i, 760D/T6s, 750D/T6i, 650D, 600D, 7D Mark II, 7D, 6D Mark II, 6D, 5D Mark IV/III/II, 1D Mark III, 1DX, 550D, 500D, 450D, 90D, 80D, 70D, 60D, 50D, 1100D, 77D, SL3/250D, T7/1500D, 2000D, T100/3000D, 4000D. Note: Firmware upgrades are available to address compatibility issues(NOT compatible with RP R50)

【Multifunctional Professional Flash Trigger】 The upgraded QPRO-N TTL wireless flash trigger is powerful and fully supports TTL automatic flash, flash exposure compensation (FEC), 1/8000s high speed sync, stroboscopic flash, manual flash, magnification function, group modeling lamp control, group zooming, single point triggering, and simultaneous output value adjustment for all groups | 【Single Point Triggering】 Enter C.Fn SHOOT via the MENU button to start single point triggering with the trigger mounted on cameras for fast continuous shooting. Note: Only triggers flash under M/Multi Mode, not for parameter adjustment. The 1/8000s high speed synchronization allows for faster shutter speeds and ideal for fast moving subjects, and supports a focus assist light that automatically lights up under dim light when the camera is unable to focus | 【Built In 2.4G Wireless Q System】 Wirelessly trigger NEEWER Q4 Q3 Z1-N Z760-N NW420-N NW655-N S101-300W/400W PRO thanks to the built in NEEWER wireless Q system, or control other flashes without a Q system using a NEEWER QR receiver and a 2.5mm sync cord (all sold separately). Also remote control via 2.4GHz stable connection for flashes up to 5 groups, 32 channels, and 01-99 ID settings, and set them all on the same channel and ID settings to tigger without signal disturbance | 【Screen Magnification Function】 The flash trigger features an LCD ultra large high definition display screen where up to five flash groups are shown at one time. Double click the group button quickly to switch from the setting page of all groups (A-E) to the enlarged view of the settings and related details of the corresponding group. The five group buttons, four function buttons, and a scrolling wheel makes parameter settings clear, intuitive, and easy to use | 【Wide Compatibility】 The QPRO-N flash trigger can be quickly fixed on the camera with the metal hotshoe. Compatible with Nikon D4 D5 D6 D60 D70S D90 D100 D200 D300 D610 D700 D750 D780 D800 D810 D850 D3100 D3200 D3300 D3400 D3500 D5000 D5100 D5200 D5300 D7100 D7500 Z9 Zfc Z50 Z5 Z6 Z7 Z6II Z7II. Note: Firmware upgrades are available to address compatibility issues

【Compatible with Ricoh GR Series】 This UV protection filter is fully compatible with Ricoh GR IIIx GRIIIx GR III GRIII & GR II GRII digital compact cameras | 【Protective UV Filter】 This UV filter reduces haze and minimizes ultraviolet (UV) rays while improving contrast. Perfect for capturing high altitude and snow photos without the bluish cast. Keep this filter on your lens to protect against dust, scratches, fingerprints, and bumps | 【Multi Coated HD Optical Glass】 Featuring multiple layer coatings on the premium optical glass, this uv filter blocks out ultraviolet rays (300-410nm) and deliver 99.8% light transmittance and minimal reflectance below 0.1%, to reduce flare and ghosting while ensuring accurate color rendition, and is anti static, oil, water, and scratch resistant | 【Ultra Slim Aluminum Frame】 Made of CNC processed, black anodized aluminum alloy, the ultra slim frame is sturdy and rust resistant and avoids vignetting with wide angle or telephoto lenses | 【Removable Adhesive Ring】 Use the included adhesive ring to effortlessly attach this UV filter on your camera lens. Easy to remove with the included removal tool and adds no bulk to your camera while shooting or on the go

【Protective UV Filter】Featuring 99.8% light transmittance, the protection UV filter is mounted on your camera lens to block ultraviolet rays and protect the lens from dust, scratches, and bumps | 【Fully Compatible with X100 Series】Specifically designed for the X100 series cameras, the filter is compatible with Fujifilm X100 X100S X100F X100T, and X100V. Simply screw the filter on the camera lens, and it will tightly fit. Easy to mount and remove, with no risk of being stuck on your lens | 【Multi Coated Optical Glass Build】The filter itself is made of high definition optical glass to help you take clear images without losing image sharpness. The double sided 30 layers of Nano coatings make the filter water repellent, scratch resistant, oil proof, and anti fingerprint | 【Stylish Look with Anodized Aluminum】Built with anodized aluminum frame, the UV filter takes on a stylish look with matte finish. Available in black or silver, the filter matches the color of your X100 camera without appearing obtrusive. The lightweight aluminum frame makes it not bulky and easy to carry | 【What’s Included】The package includes a UV protection filter, a lens cleaning cloth and a filter case. Note for usage: before mounting the UV filter, please remember to remove the standard mounting ring from X100V first

【Variable ND Filter】 Neewer ND2-ND400 Variable Filter reduces the amount of light reaching the camera sensor, allows you to shoot in various conditions with slower shutter speeds and wider apertures, perfect for capturing rivers, waterfalls, light trails, and other moving objects with dynamic motion blur | 【Premium Materials】 Japanese NITTO polarizing film ensures optimal neutrality and accurate color contrast and reproduction. With 4-element superior optical glass and 42-layer multi-resistant coatings, this ND filter makes you take images and videos with great confidence | 【Multiple Nano-Coatings】 42 nano-coatings with 0.1% minimum light reflectance can block ultraviolet rays from 300nm to 380nm and reduce flare and ghosting. The multi-resistant coatings protect the filter against moisture, oil, dust, and scratch | 【Ultra-Slim Design】 The 0.37” (9.5mm) thick ultra-thin lens with precise threading is easy to mount. The wide outer frame prevents vignetting in your shots and perfectly suits wide-angle and telephoto lenses | 【Note】1. An X-patterned glare or ghosting may appear when light is reduced to ND256. 2. Actual ND effects may differ at the Min and Max marks as well as in different environments. 3. For long exposure, please purchase ND1000 or ND2000 filters. 4. For this 49mm ND filter, the lens cap/hood should be 52mm

【Variable ND Filter】 Neewer ND2-ND400 Variable Filter reduces the amount of light reaching the camera sensor, allows you to shoot in various conditions with slower shutter speeds and wider apertures, perfect for capturing rivers, waterfalls, light trails, and other moving objects with dynamic motion blur | 【Premium Materials】 Japanese NITTO polarizing film ensures optimal neutrality and accurate color contrast and reproduction. With 4-element superior optical glass and 42-layer multi-resistant coatings, this ND filter makes you take images and videos with great confidence | 【Multiple Nano-Coatings】 42 nano-coatings with 0.1% minimum light reflectance can block ultraviolet rays from 300nm to 380nm and reduce flare and ghosting. The multi-resistant coatings protect the filter against moisture, oil, dust, and scratch | 【Ultra-Slim Design】 The 0.37” (9.5mm) thick ultra-thin lens with precise threading is easy to mount. The wide outer frame prevents vignetting in your shots and perfectly suits wide-angle and telephoto lenses | 【Note】1. An X-patterned glare or ghosting may appear when light is reduced to ND256. 2. Actual ND effects may differ at the Min and Max marks as well as in different environments. 3. For long exposure, please purchase ND1000 or ND2000 filters. 4. For this 52mm ND filter, the lens cap/hood should be 55mm

【Variable ND Filter】 Neewer ND2-ND400 Variable Filter reduces the amount of light reaching the camera sensor, allows you to shoot in various conditions with slower shutter speeds and wider apertures, perfect for capturing rivers, waterfalls, light trails, and other moving objects with dynamic motion blur | 【Premium Materials】 Japanese NITTO polarizing film ensures optimal neutrality and accurate color contrast and reproduction. With 4-element superior optical glass and 42-layer multi-resistant coatings, this ND filter makes you take images and videos with great confidence | 【Multiple Nano-Coatings】 42 nano-coatings with 0.1% minimum light reflectance can block ultraviolet rays from 300nm to 380nm and reduce flare and ghosting. The multi-resistant coatings protect the filter against moisture, oil, dust, and scratch | 【Ultra-Slim Design】 The 0.37” (9.5mm) thick ultra-thin lens with precise threading is easy to mount. The wide outer frame prevents vignetting in your shots and perfectly suits wide-angle and telephoto lenses | 【Note】1. An X-patterned glare or ghosting may appear when light is reduced to ND256. 2. Actual ND effects may differ at the Min and Max marks as well as in different environments. 3. For long exposure, please purchase ND1000 or ND2000 filters. 4. For this 55mm ND filter, the lens cap/hood should be 58mm

【Variable ND Filter】 Neewer ND2-ND400 Variable Filter reduces the amount of light reaching the camera sensor, allows you to shoot in various conditions with slower shutter speeds and wider apertures, perfect for capturing rivers, waterfalls, light trails, and other moving objects with dynamic motion blur | 【Premium Materials】 Japanese NITTO polarizing film ensures optimal neutrality and accurate color contrast and reproduction. With 4-element superior optical glass and 42-layer multi-resistant coatings, this ND filter makes you take images and videos with great confidence | 【Multiple Nano-Coatings】 42 nano-coatings with 0.1% minimum light reflectance can block ultraviolet rays from 300nm to 380nm and reduce flare and ghosting. The multi-resistant coatings protect the filter against moisture, oil, dust, and scratch | 【Ultra-Slim Design】 The 0.37” (9.5mm) thick ultra-thin lens with precise threading is easy to mount. The wide outer frame prevents vignetting in your shots and perfectly suits wide-angle and telephoto lenses | 【Note】1. An X-patterned glare or ghosting may appear when light is reduced to ND256. 2. Actual ND effects may differ at the Min and Max marks as well as in different environments. 3. For long exposure, please purchase ND1000 or ND2000 filters. 4. For this 62mm ND filter, the lens cap/hood should be 67mm

【Variable ND Filter】 Neewer ND2-ND400 variable filter reduces the amount of light reaching the camera sensor, allows you to take photos in various conditions with slower shutter speeds and wider apertures, perfect for capturing rivers, waterfalls, light streaks and other moving objects with dynamic motion blur. | High-quality materials: the Japanese NITTO polarising film guarantees optimal neutrality as well as precise contrast and colour reproduction. With superior 4-element optical glass and 42-layer multi-resistant coatings, this ND filter lets you take photos and videos with confidence. | 【Multiple Nano-Coatings】42 nano-coatings with a minimum light reflectance of 0.1% can block ultraviolet rays from 300nm to 380nm and reduce flare and ghosting. Multi-resistant coatings protect the filter against moisture, oil, dust and scratches. | 【Ultra Slim Design】 The ultra-thin 9.5 mm lens with precise thread is easy to mount. The wide outer frame prevents vignetting of your shots and is ideal for wide-angle and telephoto lenses. | 【Note 1. X-shaped glare or ghosting may appear when light is reduced to ND256. 2. Actual ND effects may differ to Min and Max brands as well as in different environments. 3. For long exposure, please buy ND1000 or ND2000 filters. 4. For this 82mm ND filter, the lens cap/cover must be 86mm.

【Dedicated to Mini 4 Pro Drone Lens】 Precisely CNC machined to be exclusively compatible with the DJI Mini 4 Pro. This ND & CPL filter kit is a game changer for all drone enthusiasts seeking to fine tune shutter speeds, reduce flare, enhance color, and achieve perfect exposure in different weather conditions. Made of aircraft level aluminum alloy, the lightweight 0.11oz/3.2g filters won't interfere with drone calibration and balance | 【Limited Variable Neutral Density Filter】 The ND2-32 filter with 1 to 5 stops of light reduction is suitable for moderate lighting conditions, enabling slower shutter speeds and wider apertures. The ND64-512 filter with 6 to 9 stops of light reduction is more appropriate for bright lighting situations. It allows for longer shutter speeds, even in intense light, offering creative effects such as smooth waterfalls or blurred motion | 【Vivid Color Reproduction with CPL/UV Filter】 Elevate your visuals in bright sunlight with the CPL filter, darkening skies and reducing glare from nonmetallic surfaces (such as water, glass, and window) for vivid color and contrast. The UV filter blocks ultraviolet rays and eliminate the bluish cast in images | 【Both Side Multi Coated HD Optical Glass】 With multiple layers of multi functional coatings on both sides of the HD optical glass, these filters are water repellent, scratch resistant, and oil proof, ensuring long lasting optical quality in challenging environments | 【Lightweight Ultra Slim Frame】 Crafted with precision CNC machining and an ultra slim aluminum frame, each lightweight filter seamlessly fits the drone lens, ensuring no impact on flight stability or performance. Come with a compact carrying case and a cleaning cloth for easy storage and maintenance

【Fully Compatible with DJI Osmo Pocket 3】 The NEEWER Magnetic Variable ND2-ND32 Filter is perfectly compatible with DJI Osmo Pocket 3, allowing you to effortlessly manage various lighting conditions. Whether it’s overcast or sunny, simply rotate this adjustable neutral density filter to control the light entering your camera lens and prevent overexposure | 【1-5 Hard Stops for Precise Exposure Control】 Featuring hard stops at both ends, this VND filter offers precise control within a range of 1 to 5 stops (ND2 to ND32). Adjusting to the exact marked stop enables you to achieve the precise ND level needed for perfect exposure, capturing every scene with stunning motion blur and exceptional sharpness. Note: Using the maximum aperture may cause an X shaped black cross due to interactions between the VND filter and certain lenses or focal lengths | 【Magnetic Fast & Secure Attachment】 The magnetic design allows for rapid filter changes in just 1 second, providing a secure hold during auto follow shots, outdoor sports, or when switching between horizontal and vertical shooting | 【Multi Coated HD Optical Glass】 Featuring multiple layers of multifunctional coatings on both sides, this HD optical glass filter is scratch resistant and oil proof, ensuring enduring optical clarity in challenging conditions. It comes with two LCD touchscreen protectors to safeguard your screen from scratches while maintaining full touch sensitivity | 【Ultra Slim & Lightweight Aluminum Frame】 The precision CNC machined aluminum frame seamlessly fits your gimbal without affecting its calibration or storage. Its lightweight design makes it easy to carry, perfect for dynamic outdoor photography and videography

【Fully Compatible with Osmo Pocket 3】 NEEWER Magnetic Variable ND64-ND512 Filter is seamlessly compatible with DJI Osmo Pocket 3, helping you to handle various light conditions with ease. From overcast to bright sunny days, simply rotate this adjustable neutral density filter to adjust the amount of light that enters your camera lens to avoid overexposure. | 【6-9 Hard Stops for Precise Exposure Control】With hard stops at both ends to limit this VND filter within 6 to 9 stops (ND64 to ND512). Dialing to the exact marked stop allows you to achieve the desired precise ND level for a perfectly exposed shot, capturing every valuable moment with magnificent motion blur and undoubted sharpness. Note: Using the maximum aperture may result in an X black cross due to the VND filter's interaction with certain lenses and focal lengths. | 【Magnetic Fast & Secure Attach】 The magnetic design ensures rapid filter changes in just 1 second and provides a secure grip when using auto follow, shooting outdoor sports, or switching between horizontal and vertical shooting. | 【Multi Coated HD Optical Glass】 With multiple layers of multi functional coatings on both sides of the HD optical glass, this handheld action camera filter is scratch resistant and oil proof, ensuring long lasting optical quality in challenging environments. Two LCD touchscreen protectors are included to help keep your screen from scratches without affecting the touch sensitivity. | 【Ultra Slim & Lightweight Aluminum Frame】Precision CNC machined aluminum frame seamlessly fits the gimbal without any impact on gimbal calibration or storage. Lightweight for easy carrying to your outdoor dynamic photography and videography.

【Compatible with GoPro 9 10 11 12 13】 This variable ND filter is compatible with GoPro 9 10 11 12 13. It helps you easily handle various outdoor light conditions, from overcast to bright sunny days, and control the amount of light that enters your camera lens to avoid overexposure | 【Variable & Precise Light Control】 Hard stops at both ends limit neutral density between ND32 and ND512 (5 and 9 stops). Simply rotate to the exact marked stop to achieve desired light reduction level for accurate exposure control and capture moving subjects with expressive motion blur effects | 【Quick & Secure Attachment】 This filter quickly threads onto the camera and stays firmly in place during any sport activity, whether it is surfing, hiking, mountain climbing, or biking | 【Multicoated HD Optical Glass】 Multiple oleophobic and scratch resistant coatings on both sides of the HD optical glass ensure excellent optical performance and effortless daily cleaning | 【Slim Aluminum Alloy Frame】 Precision CNC machined aluminum alloy frame is lightweight yet robust, ideal for outdoor photography and videography on the move

【Standard VESA Monitor Mount】 With 75 x 75mm and 100 x 100mm VESA standard hole patterns, this monitor mount adapter is perfect for attaching flat displays, TV screens, and field monitors up to 44lb/20kg | 【Three M4 Screw Types Available】 M4 x 10mm, M4 x 12mm, and M4 x 14mm screws suit various thread depths and ensure secure installation. An L shaped hex key is supplied for screw tightening | 【Arca Type Quick Release Clamp】 Compatible with the Arca type quick release mounting system, this VESA mount allows you to install, fasten, release, and remove the screen with ease | 【360° Rotatable Metal Ball Head】 The ball head lets you rotate the monitor at 360° for vertical and horizontal viewing or tilt it at 90° for optimal angles. A long lever handle allows easy adjustment and firm locking | 【Universal 5/8" Receiver Adapter】 Designed with a 5/8" receiver, the display mount can connect to a C stand, desktop monitor stand, and heavy duty light stand with a 5/8" stud for conferencing, presentation, TV production, and interviewing

【More Cameras Compatible】 Compatible with Sony Alpha 7C Alpha 7 III Alpha 7R IV Alpha 9 II Alpha 6600 Canon EOS R6 R5C R5 R3 90D Nikon Z9 Z7 Z7II Z6 Z6II Fujifilm X T4 Blackmagic 4K 6K and other DSLR DSLM cameras. Note: this camera cage is not suitable for a lens with a tripod collar mount ring, so be sure to remove it before use | 【Diverse Mounting Options】 Numerous 1/4" and 3/8" female threads, cold shoes, and ARRI locating holes on the top and bottom for enhanced compatibility. A top handle (CA007), magic arm, microphone, field monitor, cold shoe mount adapter, LED video light, RGB light, and other accessories (all NOT included) can be attached to further build your camera rig | 【Precise & Easy Access】 The featured slim Arca type plate base, unlike the dual rod system, leaves wider space for wire routing and camera adjustment, while the CNC precision machining for accurate alignment and full access to the buttons, ports, and functions of the camera without taking the cage off. At only 22.9oz/650g, the lightweight yet sturdy aluminum body supports devices up to 33lb/15kg | 【Flexible Camera Mounting】 The direct mount system with a 1/4" screw and 1/4" countersink slot provides a quick, convenient, and tool free camera installation, with a flat screwdriver magnetically stored under the cage for easy tension adjustment. The nonslip soft silicone pad adds friction and prevents your camera from wobbling or scratches | 【Dual Grips & Tripod Mounted】 The two ergonomic handgrips with synthetic leather texture and finger contours offer you a comfortable and firm grip on the cage for handheld shooting, or directly it on the tripod head via the 1/4" screw holes on the bottom, for seamless switching between handheld and tripod shooting, thanks to its Arca type base

【Universal Camera Cage Rig】 Compatible with Canon R100 R50 R8 R6 Mark II R10 R5C Sony A9 A7S A7R A7CR A7C A6700 A6600 ZV-E10 ZV-E1 Nikon Zf Zfc Z30 Z9 Fujifilm X100VI X-S20 X-T4 X-T5 X-H2S Lumix GH6 S5 IIX Blackmagic 4K 6K and more. Note: Not suitable for a lens with a tripod collar mount ring, please remove it before use | 【Arca Type Quick Release Plate】 An Arca type quick release plate allows you to instantly slide the camera into the camera cage and secure it with the plate lock. A release button can prevent the mounted camera from dropping for reassuring safety. Or, you can remove the quick release plate and directly mount your camera on the 1/4" countersink slot | 【Comfortable Dual Handles】 Two contoured silicone handles provide a comfortable and firm grip for stable handheld shooting. The camera cage made of durable yet lightweight aluminum alloy is effortless to operate. Only 29oz/818g in weight, it can support a load of up to 33lb/15kg | 【Convenient Tripod Mounting】 Via the Arca type baseplate, this camera cage can attach to NEEWER LT35/TP22/TP65 Tripods, GM27/GM30/GM36 Tripod Ball Heads, SR006 Baseplate with 15mm Rod Clamps, and other devices. Also compatible with SmallRig | 【Multiple Mounting Points】 With 1/4" threads, 3/8" threads with ARRI locating holes, cold shoes, and a built in NATO rail, this camera cage can pair with many NEEWER accessories for function expansion, including CA007/CA018 Top Handle, MA004/MA005 Monitor Mount, CM14 Pro Microphone, CM28 Wireless Lavalier Microphone, PL81/RGB62 LED Video Light, and more

【Lightweight Fluid Drag Pan Head】 This ultra lightweight, medium sized fluid head is made of aluminum alloy and features a hollow, elaborate design, weighing only 1.5lb/0.69kg, making it easy to carry and suitable for outdoor creation. With a maximum load capacity of 13.2lbs/6 kg, it can withstand heavy camcorders and video DSLR cameras and uncertain weather | 【Smooth Panoramic Movement】 On the pan base with 360° scale marking, you can take spectacular panoramic images with fluidity and precision. Two Rosette mounts allow you to install the drag handle on both sides and pan the fluid head with either hand. Additionally, a handy bubble level helps you keep the level straight all the time | 【Convenient Quick Release System】 The quick release system enables quick camera mounting and is compatible with Manfrotto 501PL/504PL plates. A safety pin prevents the plate and your valuable camera from dropping. Simply press the side release button and slide the plate out of the clamp | 【Easy & Safe Angle Adjustment】 With -70°/+90° counterbalanced tilt adjustment, this tripod head lets you photograph at any angle, whether it’s low angle, overhead, vertical, or horizontal. Once you find the perfect position, tighten the locking knob to secure the tripod head in place | 【Universal Mounting Threads】 The 1/4” & 3/8” top mounting screws fit a variety of camcorders, DSLR cameras, mirrorless cameras, cinema cameras, and telescopes. Whereas, the 3/8” bottom socket attaches this fluid head to a tripod, monopod, and camera slider with the identical thread

【Portable RGB Video Light with Smart App Control】 Upgraded with the advanced Bluetooth module for wireless control over single or multiple LED lights via the NEEWER APP on your phone, and unlock smart functions like RGB Mode, Music Sync, Light Source Library, Color Matching, Preset Color Temperature, Color Picker functions, and Parameter Memory for quick lighting setup. At 0.24lb/108g and 0.58"/1.48cm thick, this selfie light fits in your palm for professional photography lighting on the go | 【Versatile Full RGB Color】 With 94 powerful LEDs, this 5W full color RGB light delivers a max illuminance of 450lux at 0.5m, up to 36,000 color choices, and a 97 high CRI for accurate color rendition without flicker. Ideal for selfies, vlogs, food/beauty/gaming live streaming, social media TikTok/Youtube/podcast video recording, portrait/still photography, videography, zoom calls, makeup lighting for makeup artists, influencers, live streamers, etc. Recommended fill light distance: 4.9"/1.5m | 【Personalized Lighting with CCT/HSI/FX Modes】 This fill light features precise light adjustments for custom lighting scenes. Adjust color temperature from 2500K to 8500K in CCT mode and use the built in GM adjustment for color calibration. HSI mode fine tunes 360° hue, 0~100% brightness, and 0~100 saturation. Explore creativity with the 17 scene effects like cop/police car, ambulance, and fireworks. The OLED display and physical buttons for easy operation | 【2000mAh Rechargeable Lithium Battery】 The 3.7V 2000mAh lithium battery supports up to 110 minutes of continuous lighting at 100% brightness. Fully charged in just 100 minutes via the 5V 2A Type C port, and supports seamless charging while in use, ensuring uninterrupted power throughout the day | 【On Camera Light with Cold Shoe Mount】 The cold shoe mount works with the 1/4" threads on the back clip to install the selfie light on cameras, tripods. The 2"-3.3"/5.2-8.5cm phone clamp holder compatible with iPhone 16 15 Pro Max 15 Plus 14 13 12 Mini Samsung Galaxy S24 S23 S22 Ultra Google Pixel 9 8 7 Pro Huawei etc. The front clip fits phones, tablets, or laptops below 0.98"/2.5cm thickness, with a lens hole to film without blocking the front camera, and allows for 160° front and back tilt