M key M.2 NGFF SSD to PCIe X4 adapter. | The speed and other properties is not changed,only form conversion interface. | Supports PCIe 3.0, PCIe 2.0 motherboard,Compliant with PCI Express 3.0,Support M-key XP941 SM951 PM951 A110 m6e SSD | System requirement:Motherboard: Z97 or later,Windows 10 or later | The adapter only work for M-key socket, cannot work for B-key or B/M-key socket.

Linux Kernel 4.3 or above | 1 x Oculink SFF-8611 cable. | 1 x OCuLink SFF-8612 female to PCI-E 16x Adapter | Windows 8.1/8.1-64/10/10-64 | 1 x OCuLink SFF-8612 female to Key M male Adapter

Thus an EDSFF E1.S SSD becomes an PCI-E SSD, which can be used in IoT, data center and server area. | This converter enables the connection of a GEN-Z SSD in E1.S. Fit for 9.5mm & 15mm & 25mm thickness SSD with heat sink.（like PM9A3 PM9D3 P5801X) | The converter can be installed into your system internally through the PCI-E 4X interface. | Compliant with PCI Express 4.0. No driver installation is required. Most of the latest operating systems support PCIe-NVMe SSDs. | EDSFF offers a dynamic range of form factors that have advantages vs the incumbent SSD form factors in capacity, scalability, performance, serviceability, manageability, thermal and power management.

Smaller size connector and cable saves device space | Provide four channels signal transmission as per industry standard | Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel | Meet SAS4.0, Ultraport SlimSAS SFF-8654 specification | Meet PCIe Gen3/4 and SAS4.0 specification

Ultraport Slimline 8i 74Pos Cable Assembly | Length: 50cm | Connector 1: Slimline SFF-8654 8i 74pin | Connector 2: Dual SFF-8087 Mini SAS | Applications for Servers,Data Storage,Workstation

Ultraport Slimline 8i 74Pos Cable Assembly | Length: 50cm | Connector 1: Slimline SFF-8654 8i 74pin | Connector 2: Dual SFF-8643 Mini SAS HD | Meet PCIe Gen3/4 and SAS4.0 specification

This cable can be used to connect internal devices, e.g. a backplane with Slim Line 8654 74pin connector to a controller with oculink SFF-8611 connector. | Ultraport Slimline 8i 74Pos Cable Assembly | Smaller size connector and cable saves device space | Provide four channels signal transmission as per industry standard | Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel

3.5 inch SATA HDD Drive to IDE 40Pin mainboard converter Board | Works with all 2.5/3.5" SATA Drives. | Supports IDE 66/100/133MB/s | With Master and slave jumper. | No driver needed, plug and play, unit is not hot swappable.

2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board | Works with all SATA Drives up to 500GB | Supports IDE 66/100/133MB/s | 44 Pin IDE connector powers the Drive no other cables or adapters are needed. | No driver needed, plug and play, unit is not hot swappable.

No Memory card in the package. | Need CF type I slot. (Don't support CF-2) | 3.3mm height CF card | Support 16/32/64/128GB Standard SD card. | SD SDHC SDXC to High-Speed Extreme Compact Flash CF Type I Adapter For 16/32/64/128 GB

Product use: suitable for the extension of the CFexpress card slot to the M.2 NVME 2230 hard drive | Design advantages: Differential signal enhanced layout design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference. | Material advantages: high-quality gold-plated connectors are used, high-frequency and low-resistance high-quality materials are used for the PCB, and the PCB is precision-crafted. | The CH SN530 SSD not included. Bandwidth Speed: PCIe4.0 gen4x2 (support CFexpress B specification full speed). | Friendly reminder: XBOX dedicated expansion card, currently only supports Western Digital CH SN530 hard drive.

Thus an EDSFF E1.S SSD becomes an U.2 SSD, which can be used in IoT, data center and server area. | This card expands the PC by one EDSFF E1.S interface. It can be connected e.g. to the DC P4511 Series EDSFF NVMe SSD. | The converter can be installed into your system internally through the U.2 interface. | Compliant with PCI Express 4.0. | This converter enables the connection of a GEN-Z SSD in E1.S.

Twisted pair design further reduces interference for high speed, error free data transfer | USB 2.0 cable for downloading pictures and videos from camera to computer; | Manufactured with Braid and Foil Shielding to reduce EMI and RFI interference | Supports USB 2.0, 1.1 and 1.0; Data transfer rates up to 480 Mbps | Support Nikon COOLPIX S3000 S3100 S3200 S8000 S100 S203 S230 P7000 AW100 L100 L110 L120 L19 L20 P100 P300 P310 P500 P510

The cable can be used to connect internal usb 9pin devices, e.g. 4 cards with 9pin connector to a controller with usb2.0-9pin connector. | USB 2.0 9pin 10pin Header 1 to 4 Female Splitter Extension Cable HUB with IDE 5V Power Connector Adapter Port Multilier | The IDE 4pin connector can connect the extral 5V power to the board. | It can extend your motherbord 9pin connector to 4*9pin connectors. | With back glue, can be directly fixed on the main board or chassis.