Made for headsets: Powerful magnets allow you to mount audio or vr headsets with ease and wind away extra cable lengths as needed | Simple and versatile: Its unique design and powerful magnets also allow you to use each piece separately as a mount | As clean as your build: Made of nonconductive and hazardousfree silicone, the puck can be cleaned easily and is made to last through years of use

MADE FOR HEADSETS: Powerful magnets allow you to mount audio or VR headsets with ease and wind away extra cable lengths as needed | SIMPLE AND VERSATILE: Its unique design and powerful magnets also allow you to use each piece separately as a mount | AS CLEAN AS YOUR BUILD: Made of non-conductive and hazardous-free silicone, the Puck can be cleaned easily and is made to last through years of use

40 SERIES READY: Powers an NVIDIA 40 Series GPU with an existing NZXT ATX 2.X PSU-no ATX 3.0 required. | 600W RATED: Delivers up to 600 watts of power to graphics cards with a 12VHPWR port. | CONNECTORS: 12+4-pin (16-pin) 12VHPWR goes to the GPU, and dual 8-pin PCIe goes to the PSU. | COMPACT CABLE: Replaces the bulky standard adapter that comes with NVIDIA 40 Series GPUs. | NZXT COMPATIBILITY: Guaranteed for use with all NZXT C-Series Gold ATX 2.X PSUs (PA-xG1BB).

MORE EFFICIENT: At 50% load and high-line input voltage, power conversion efficiency reaches 2% higher than 80plus Gold Standard. | FULLY MODULAR: Use only the cables you need to keep your system clean and organized. Black sleeved cable and a matte black finish seamlessly fit any PC style. | COMPATIBLE AND HIGHLY-TESTED: C series is built and tested with strict standards for trouble-free installation. It fits most ATX case and supports the latest NVIDIA and AMD GPUs up to 30 series and AMD 6000 Series. | MORE PRECISE AND ERROR-FREE: Micro controller (MCU) enabled protection mechanism monitors current and voltage and output wattage. | OPTIMIZED AND SILENT: Gold PSU includes low thermal dissipation optimization with upgraded components and optimized circuit design.

ATX 3.1 - Compliant with the ATX 3.1 standard to fuel high-performance PC components with stability, efficiency, and power spike resistance. | 40 SERIES READY - Durable, heat-resistant 12V-2x6 connector pumps up to 600 watts to NVIDIA GeForce RTX 40 Series graphics cards. | HIGH EFFICIENCY, LOW NOISE - Awarded certifications of 80 PLUS Gold Efficiency, Cybenetics Gold Efficiency, and Cybenetics A- Noise Level. | ULTRA-LOW NOISE FAN - 135mm fluid dynamic bearing fan with Zero Fan Mode is completely silent when under 50% load. | HIGH-QUALITY CONSTRUCTION - 100% premium Japanese capacitors improve hold-up time and minimal ripple noise, ensuring reliable and stable power delivery.

STREAMING MICROPHONE: Designed for single sound-source gaming and streaming use, the Capsule delivers high-resolution voice pickup while suppressing unwanted background noise | DESIGNED FOR GAMERS: Unidirectional cardioid polar pattern ensures you'll have minimal background noise. Internal capsule is tuned for speech in a gaming environment, optimizing vocal clarity. | HIGH QUALITY AUDIO: Incredible analog-to-digital conversion technology ensures your voice will be the best in the lobby. | SIMPLE AND RUGGED: No screws, washers, or fumbling to place Capsule on a boom arm. Internal shock mounting relieves any worry of your mic bumping into your desk mid-game. | ACCESSORIES INCLUDED: USB-C to USB-A Cable, Mic thread adapter (length 32mm): Male 1/4” to Female 3/8”, Stand quick-release cover

BUILT-IN RGB LIGHTING: Comes with two pre-installed 140mm RGB fans and a RGB controller for customizable lighting. Tempered glass panels show it all off. | DEDICATED GPU FAN: An angled 120mm fan draws air from below the case to provide direct cooling for your power-hungry graphics card. | SPACIOUS COOLING SUPPORT: Up to 280mm radiator support in the front, 240mm up top, and 120mm in the rear. Fits up to 6 fans including the dedicated GPU fan. | READY FOR PERFORMANCE: Fits most NVIDIA GeForce RTX 40 Series graphics cards with its 365mm max GPU clearance. Display your GPU vertically using the NZXT Vertical GPU Mounting Kit (sold separately). | EASILY MANAGE CABLES: Wide cable channels with hooks, bridges, and straps take the guesswork out of organized cable management.

EXCEPTIONAL GPU COOLING-The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included). | LARGE RADIATOR SUPPORT-Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential. | HIGH-PERFORMANCE AIRFLOW-Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust. | PRE-INSTALLED FANS-Equipped with two 120mm Quiet Airflow fans-one in front, one in rear-for solid out-of-the-box performance. | SEAMLESS CABLE MANAGEMENT-Effortlessly route and conceal cables using the wide channels, hooks, and straps.

HIGH-PERFORMANCE AIRFLOW: Perforated front and top panels direct filtered air through the case to cool down components and enhance performance. | VIVID RGB LIGHTING: Includes two pre-installed F140 RGB Core fans that connect to a standard 5V ARGB header. | DEDICATED GPU FAN: An angled 120mm fan draws air from below the case to provide direct cooling for your power-hungry graphics card. | SPACIOUS COOLING SUPPORT: Up to a 280mm radiator in the front and 240mm up top. Fits up to 6 fans including the dedicated GPU fan. | READY FOR PERFORMANCE: Fits most NVIDIA GeForce RTX 40 Series graphics cards with its 400mm clearance. Display your GPU vertically using the NZXT Vertical GPU Mounting Kit. **Sold separately. Reduces clearance to 384mm. | EASILY MANAGE CABLES: Wide cable channels with hooks, bridges, and straps take the guesswork out of organized cable management.

MAXIMUM CONTROL: Easily customize lighting and cooling modes via NZXT CAM, with access to six RGB lighting channels. Configure lights and fans from any manufacturer. | FINISHING TOUCH: A white or black metal cover conceals the inner workings, blending seamlessly with your case. The heat fins have been expanded to cool the PCIe Gen 5 enabled NVMe drive slot. | READY TO ROCK: Integrated Wi-Fi 6E, rear I/O shield, and clever port placement makes the build process easy-plenty of room on board for upgrades down the line. | STUNNING CRAFTSMANSHIP: Build your dream system with a full metal cover that blends aesthetically with black or white cases for a seamless backdrop for your components | CPU and SOCKET: Supports AMD Ryzen 9000, 8000, and 7000 Series Processors

Record video content at 1080 resolution with 60 frames per second from the console, mobile device, PC, or camera | Play the console games in 4K60 while recording with zero lag passthrough | Works seamlessly with Skype, Zoom, Discord, or any other video calling software | Software support through NZXT CAM

STURDY STEEL BRACKET: The thick steel bracket holds even heavy graphics cards vertically and prevents them from sagging. | PCIE 4.0 RISER CABLE: Utilizing PCIe 4.0, the Riser Cable facilitates the high-speed bi-directional transfer of data from the video card to the motherboard, and vice versa for better performance. | NZXT COMPATIBILITY: The Bracket and Riser Cable fit perfectly into NZXT H7 Series cases, allowing enough clearance for air and AIO cooling systems, and the ability to replace the standard horizontal mounting bracket.