4 Pin to 3 Pin RGB Adapter: the 4Pin is for Corsair RGB HUB, Lighting Node CORE, Commander CORE and iCUE Commander CORE XT ONLY | Wide Compatibility: You can use this adapter with splitters and hubs to manage multiple ARGB devices simultaneously. It's fully compatible with the Lian Li Strimer Plus. | Note: NOT work with with Commander Pro or Lighting Node Pro! the 3Pin Female (Male) is for any standard 5V 3 Pin Device | Package Include: 4 Pin to 3 Pin RGB Adapter (29cm), a 3Pin male pin connector, not include Corsair Controllers

2280 SSD Heatsink with ARGB: the M. 2 SSD heatsink not only effectively solve the speed reduction problem caused by high temperatures in hard drives, but also support ARGB synchronization | 5V 3Pin ARGB Control: Built with the advanced ARGB lighting system, you can control the colors by connecting to M/B or by other 5V 3Pin ARGB controller. | Aluminum Heatsink with Thermal Silicone Grease: The heat is quickly dissipated by the aluminum alloy heat dissipation, reducing the temperature of the hard drive and improving operational performance. | Mirror reflection Lights: The multi-layer lighting effect at the center of the bracket is designed with transparent mirror reflection , bringing you brilliant lighting effects! | the heatsink size: 72*23*14mm, 5V 3Pin cable is about 20inch, 3Pack M.2 thermal pad size :70x20x1mm

DC5525 to 2x SATA Adapter: the cable can convert 12V DC5525 power supply to 5V Sata, and power for Hard Disk | High Quality: cable is made of standard tinned copper wire 1007 18AWG | 12V to 5V: it comes with step-down voltage regulator conversion board, convert 12V to 5V Sata, fits for Hard Disk | Cable Length: 27inch in total | Note: if you need open a hole to fix to DC connector, the hold diameter is 8mm

Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports | Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector | Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable | Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. | This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards. | Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in)

4Pin to SATA: 4 pin port connects to Hikvision video recorder ( Only works with Hikvision video recorder as listed. ), SATA port connects to hard drive | Connector A: 4 pin, Connector B: SATA female | Compatibility: Only compatible with Hikvision video recorder such as:7100 series,D1 series(D1-108C),N1 series(N1-104),71 series(7104,7108,7116),DS76 series(DS7604n-e1/4p),DS78 series(DS7804n-k1),7808hgh,7816hgh,5108h,5116h,DH-NVR4208,NVR4216,2116H, 3100 series(DH-DVR3104) | Lenght: 20cm/ 7.87inch, 18awg, tinned copper wire | Note: This cable only works with Hikvision video recorder as listed. If you use other incompatible devices, it will definitely burn or damage the hard drive. Please check your motherboard before order it, yellow cable is 12V, black is GND, Red is 5V, your motherboard must have same direction with the cable.

Excellent thermal conductivity: Made of thermal grease with heat conductivity of 12.8 W/mK, better a lot than normal thermal pads | Reliable & Durable: thermal pad is rated voltage up to 9.8KV and has a thermal conductivity of 12.8 W/mk. High temperature performance , non-toxic, odorless, anti-corrosion, wear resistant, anti-static, fire retardant, compression, good insulation, contact with any electrical traces wouldn’t result in damage of any sort. | Application: Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules. | Convenient & Affordable - Dimension 100x100mm, the thermal pads can be cut freely according to your needs. 0.5mm,1mm,1.5mm/set can meet different needs. | Package include: 0.5mm,1mm,1.5mm thickness each 1pcs, total 3pcs.

This switch is made of acrylic material, concise, exquisite and practical. It is recommended for home users, computer rooms, bare board machines, water-cooled chassis DIY, etc. | If the button on the chassis panel is damaged, this repair is a very good choice. The switch wiring can be inserted from the optical drive position on the front panel, the fan window on the back panel, the expansion slot on the back panel, etc. | If the case is placed in a hard-to-reach place, use this switch to lead to a place where it is convenient to operate. | There are many uses. Use your imagination and dedicate it to you who love to do it. The switch has 1 boot button + 1 restart button + 1 power indicator + 1 hard disk indicator | Package Contents: 1 x Power Switch with 1.6m cable

External Desktop PC Power Switch: It is recommended for home users, computer rooms, bare board machines, water-cooled chassis DIY, etc. If the case is placed in a hard-to-reach place, use this switch to lead to a place where it is convenient to operate. | Easy to install by Sticker: Please check the installation instructions on product description. Just connect the POWER LED+, POWER LED-,POWER SW connectors with motherboard and stick the adhesive | If the button on the chassis panel is damaged, this repair is a very good choice. The switch wiring can be inserted from the optical drive position on the front panel, the fan window on the back panel, the expansion slot on the back panel, etc. | Comes with 1 to 2 Splitter: the small 1 to 2 splitter board makes the power button works with your original power supply works together | Package included: 1x Computer Power Switch ON/OFF with 1.7M cable; 1x 1 to 2 splitters; 1x adhesive stickers; 1x installation manua.