【One adapter, so many options】M42 mount lens to EOS RF-mount camera body, explore new lens combinations, for M42 42mm Screw mount lens (NOT Fit Mamiya and Fuji 42 mm lens) to EOS RF mount cameras compatible with Canon EOS R6 Mark II, EOS R7, EOS R8, EOS R50, EOS R10, EOS R3, EOS R5, EOS R5C, EOS R6, EOS R, EOS RP | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Canon EOS RF mount is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】M42 mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for M42 42mm Screw mount lens (NOT Fit Mamiya and Fuji 42 mm lens) to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】M42 mount lens to Nikon Z mount camera body, explore new lens combinations, compatible for M42 42mm Screw mount lens (NOT Fit Mamiya and Fuji 42 mm lens) to Nikon Z Mount Cameras compatible with Nikon Z fc, Z30, Z9, Z8, Z6, Z7, Z5, Z50, Z6 II, Z7 II | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Nikon Z mount is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】EF / EF-S mount lens to E mount camera body, explore new lens combinations, compatible for Canon EOS EF EF-S mount lens to E mount cameras compatible with Sony a1, a9 II, a9, a7S III, a7S II, a7S, a7R V, a7R IV, a7R III, a7R II, a7R, a7C, a7 IV, a7 III, a7 II, a7, a6600, a6500, a6400, a6300, a6100, a6000, a5100, a5000, a3500, a3000, NEX-7, NEX-6, NEX-5T, NEX-5R, NEX-5N, NEX-5, NEX-F3, NEX-C3, NEX-3N, NEX-3, ILCE-QX1, ZV-E10 | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Sony E mount camera series is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】Compatible with Canon EF EF-S mount lens, Compatible with Canon EF-M (EOS M) mount cameras. Using the PHOLSY adapter, you can mount the EF-lens on your digital EF-M (EOS M)-camera instead of the EF-M (EOS M)-lens | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Canon EF-M (EOS M) mount cameras is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】MD mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Minolta MD (MC SR) mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

✔ Only compatible with Nikon Z fc, Z50, Z30, COOLPIX B600, A1000, P1000, P950, Z6 II, Z7 II. (NOTE: Z6 II and Z7 II, it is supported by updating the camera system firmware version 1.40) | ✔ Remote unit allows photographers to control various camera functions on the camera as well as trigger the shutter from the remote. Shutter release, delayed shooting (Depending on the camera), focus adjustment (Long press " - " or long press " + " ), exposure compensation, multi selector (Functions similarly to the multi selector on the camera. Can be used for manual focus adjustment or item seletion) and Fn1 / Fn2 etc | ✔ This camera remote can take photos and shoot videos. Start the video capture by press the red dot on the remote control, and press again to stop the video capture. This Camera remote control operating range is up to 10m / 32.8 ft. Dimension: 94.0mm x 40.0mm x 9.0mm. Weight: 24g | ✔ No need to disrupt your shooting while super telephoto shooting or when using the camera on a tripod or in a remote location. This wireless shutter release is very compact and can be carried in your pocket for your work | ✔ Please Note: Once the camera get into the standby mode or go beyond operation range, the remote will disconnect automatically. To make them connected, you need to restart the remote and wake up the camera

【One adapter, so many options】OM mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Olympus Zuiko OM mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

【One adapter, so many options】PK mount lens to Fujifilm X-mount camera body, explore new lens combinations, compatible for Pentax K PK mount lens to compatible with Fujifilm X-H2S, X-H2, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T5, X-T4, X-T3, X-T2, X-T1, X-S20, X-S10, X-T30 II, X-T30, X-T20, X-T10, X-T200, X-T100, X-E4, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A7, X-A5, X-A3, X-A2, X-A1, X-A20, X-A10 etc. | 【No loss of image quality or speed】Infinity focus allowed. There is no electronic contacts or glass inside of this lens adapter, so have to manually adjust all settings (no autofocus) and no need to worry about optic degradation of your lenses. Connected lenses retain all of their superb image quality with no loss of brightness, contrast or speed | 【New exterior design, solid & durable】Aesthetics and streamlined exterior design means comfortable shooting in any direction, including vertically. The adapter, with Difficult-To-Machining tooth design, matched the nice look of your cameras and lenses. Built from aviation grade aluminum and magnesium alloy, the MOUNT ADAPTER is strong and lightweight with a durable finish, really very resistant and performing for vintage lenses | 【Precisely matched】The lens mount adapter compatible with Fujifilm FX mount camera is well constructed and makes a tight fitting connection to the lens and camera body, to preserve the performance of pro-level cameras and lenses. And it makes a precise fit with the camera and lens, crucial for meticulous performance. Attaches and detaches to the camera body smoothly and cleanly. No light leakage. Keep using the lenses you love with the most innovative camera bodies available | 【Clever design】Easy to mount and dismount. Travel lighter, use one set of lenses with two camera bodies. Best of new and old, use vintage lenses with your digital camera.【Note】You must set in the camera menu to "shoot with no lens attached"

✔ Only compatible with Sony ILCE-a1, a6100, a6400, a6600, a6700, a7C, a7M3, a7M4, a7RM3, a7RM4, a7RM5, a7SM3, a9, a9M2, DSC-RX0M2, RX100M7, ZV-1, ZV-1M2, ZV-1F, ZV-E1, ZV-E10, ILME-FX3. (NOTE: 1, a6400 and a9, it is supported by updating the camera system software. 2, a7M3 and a7RM3, it is supported by updating the camera system software version "Ver.3.00" or later. 3, RX0M2, it is supported by updating the camera system software version "Ver.2.00" or later) | ✔ Essential camera controls are provided: focus buttons for precise control of even subtle focus changes, a lock switch that prevents accidental operation during transport, movie recording start/stop, and power/digital zoom. There are also two custom buttons that mirror the functions of the C1 and AF-ON buttons on the camera body | ✔ Communication distance (line of sight): Coverage: 360°, approx. range: 10 m (32.8 ft). Dimension: 98.0mm x 32.0mm x 8.0mm. Weight: 30g. When the camera is set to BULB, press the remote shutter button to start the exposure, and press it again to end the exposure | ✔ Bluetooth communication provides reliable remote control even in bright sunlight or when there are obstacles between the commander and camera. Because communication is wireless rather than optical, full reliability and response are available even in situations where the line of sight is obscured | ✔ The Remote Control works with the camera’s built-in Bluetooth receiver, so no wired connection or add-on receiver is required. Camera connector covers can remain closed for maximum protection against dust and moisture

✔ It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects | ✔ Timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments. Number of shots can be set from 1 to 399; Double dash ( - - ) unlimited. LCD display with backlight and status LED with alarm. A locking two stages shutter button (BULB) | ✔ Compatible with Sony ILCA-77M2, 99M2, 99V; SLT-A33, A35, A37, A55, A57, A65, A67, A77, A99; DSLR-A100, A200, A300, A350, A400, A450, A500, A550, A560, A580, A700, A850, A900; Konica Minolta DIMAGE A2, A1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D

✔ It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects | ✔ Timer functions can be set to 99 hours 59 minutes and 59 seconds in one second increments. Number of shots can be set from 1 to 399; Double dash ( - - ) unlimited. LCD display with backlight and status LED with alarm. A locking two stages shutter button (BULB) | ✔ Compatible with Sony ILCE-a1, a9, a9M2, a7, a7M2, a7M3, a7M3K, a7M4, a7R, a7RM2, a7RM3, a7RM4, a7RM5, a7S, a7SM2, a7SM3, a6600, a6600M, a6100, a6100L, a6100Y, a6400, a6400L, a6400M, a6500, a6500G, a6500M, a6500Z, a6300, a6000, a6000L, a6000Y, a6000Z, a5000, a5100, a5100L, a5100Y, a3000, a3500, QX1 | ✔ Compatible with Sony HX300, HX350, HX400, HX400V, HX50, HX50V, HX60, HX60V, HX99, HX95, HX90, HX90V, HX80, QX30, RX0, RXOM2, RX100M2, RX100M3, RX100M4, RX100M5, RX100M5A, RX100M6, RX100M7, RX10, RX10M2, RX10M3, RX10M4, RX1RM2, WX500, WX700, WX800; A58, A68; NEX3N; ZV-1. Replaces Sony RM-SPR1

FEATURES OF INTERVALOMETER & SHUTTER MODES: PHOLSY camera remote control wireless shutter for Nikon supports TIMER CONTROL and 5 SHUTTER MODES. 5 SHUTTER MODES: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) and TIMER. The timer intervalometer remote is great for time-lapse recording of blooming flowers, astrophotography, and continuous shots for star trails etc. You will never get another blurry shot using this remote control | MORE FEATURES: Timing setting can be accurate to 0.1 second. 5 settings for TIMER CONTROL: Delay (Self timer), Interval (Interval timer), Long (exposure timer), N (number of frames setting) and BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 2.4GHz wireless transmission, the camera remote shutter with timer reduce camera shake and allow you to remotely control photos up to 60+ meters with ultra-powerful anti-interference ability | The wireless camera remote shutter with timer N10 compatible with Nikon Df, Z7, Z7 II, Z6, Z6 II, Z5, D750, D780, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D610, D600, D90, COOLPIX A, COOLPIX P1000, COOLPIX P7700, COOLPIX P7800, COOLPIX P950 | LCD DISPLAY: Easy to use, quick set up. The LCD display provides visual reference to your settings and offers an easier way to store the prior settings. So once it’s setup its pretty easy to simply change the number of seconds for a longer or shorter exposure time. It also illuminates for working in low-light situations even in dark, which is very convenient to get accurate shooting mode. Replaces Nikon MC-DC2 | COST-EFFECTIVE: Only need to change different shutter release cable to work with different cameras. Wireless and wired operations without occupying camera’ s hot shoe. Use AAA batteries (2 in the transmitter and 2 in the receiver, not included in package).

For use with Sony ILCE-a1, 6100, 6400, 6600, a7C, a7M3, a7M4, a7RM3, a7RM4, a7SM3, a9, a9M2, DSC-RX0M2, RX100M7, ZV-1, ZV-E10, ILME-FX3. (please note: some camera models need to update the camera system software to work with this shutter remote, such as A6400, A9, A7M3, A7RM3 and RX0M2. Please see the details in the Product Description below this page.) | Essential camera controls are provided: focus buttons for precise control of even subtle focus changes, a lock switch that prevents accidental operation during transport, shooting a still image, movie recording start/stop, and power/digital zoom. There are also two custom buttons that mirror the functions of the C1 and AF-ON buttons on the camera body | The wireless remote runs on one CR-2032 lithium button battery (included). Communication distance: control range is about10 m (32.8 ft); Coverage:360°, Bluetooth communication provides reliable remote control even in bright sunlight or when there are obstacles between the commander and camera | Great for self-portraits, group shots, night scenes, long exposures and so on. The remote is designed to resist dust and moisture plus hot and cold temperatures, offering reliable operation in a wide variety of environments and weather conditions | The commander itself is designed to be easy to hold and operate. Measuring only 1.3" x 0.6'' x 3.9", easily fits in even a small pocket

✔ Compatible with Panasonic S5, S5C, S5K, S1H, S1RM, S1R, S1M, S1K, S1, G95, G91, G91H, G91M, G90M, G90H, G90, FZ10002, G9, G9L, G9M, GH5, GH5L, GH5S, GH5M, GH5M2, GH5M2L, GH5M2M, GH6, GH6L, GH6M; G85, G81M, G81H, G81, G80M, G80, G70H, G70M, G70K, G70W, GX8K, GX8M, GX8A, GX8H, GX8, GX7, GX1, GH4RH, GH4R, GH4, GH3, GH2, GH1, GF1, G10, G7H, G7K, G7M, G7, G6H, G6K, G6M, G6, G5, G3, G2, G1; FZ2500, FZ2000, FZ1000, FZ330, FZ300, FZ200, FZ150, FZ100, FZ50S, FZ50K, FZ50, FZ30K, FZ30, FZ20S, FZ20 | ✔ Compatible with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, 510UZ, 550UZ, 560UZ, 565UZ, 570UZ, 590UZ, 810UZ, XZ-1, XZ-2, Stylus 1, 1s, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25. ( NOTE: NOT FIT Olympus OM-1, EM1X, EM1-II, EM1-III, EM5-III, EM10-III, EM10-IV ) | ✔ 4 Shutter release modes: Support autofocus. Single shooting, continuous shooting (and high speed continuous shooting), BULB shooting (long exposure) and delay release of 3s shooting | ✔ Wirelessly trigger your camera’s shutter. Receiver can also be used as a wired shutter remote, the wired shutter release function is available when the receiver is turned off and even without batteries. The receiver needs to install 2 AAA (package not included), the transmitter needs to install a CR2032 battery (package included) | ✔ Reduce camera shake and allows you to trigger your camera wirelessly up to 80 metres, using 2.4GHz digital radio technology. Replaces Olympus RM-UC1, Panasonic DMW-RSL1 and DMW-RS2. Dimension: Transmitter: 67mm X 36mm X 13mm; receiver: 90mm X 41mm X 32mm
Weight: Transmitter: 13g; receiver: 37g excluding batteries.

✔ For Nikon remote shutter release compatible with Nikon Df, Z7, Z7 II, Z6, Z6 II, Z5, D750, D780, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D610, D600, D90, COOLPIX A, COOLPIX P1000, COOLPIX P7700, COOLPIX P7800, COOLPIX P950 | ✔ For Nikon remote compatible with Nikon Z9, D3, D4, D4s, D5, D6, D800, D850, D800E, D810, D810A, D700, D500, D300, D200, F6, F100, F5, F90X, F90, N90s, D1X, D2H, D3X; Fujifilm S5 Pro, S3 Pro; Kodak DCS-14n | ✔ 4 Shutter release modes: Support autofocus, Single shooting, continuous shooting (and high speed continuous shooting), BULB shooting (long exposure) and delay release of 3s shooting | ✔ Wirelessly trigger your camera’s shutter. Receiver can also be used as a wired shutter remote, the wired shutter release function is available when the receiver is turned off and even without batteries. The receiver needs to install 2 AAA (package not included), the transmitter needs to install a CR2032 battery (package included) | ✔ The remote shutter release help reduce camera shake and allows you to trigger your camera wirelessly up to 80 metres, using 2.4GHz digital radio technology. Replaces Nikon MC-DC2 and MC-30A. Dimension: Transmitter: 67mm X 36mm X 13mm; receiver: 90mm X 41mm X 32mm
Weight: Transmitter: 13g; receiver: 37g excluding batteries.

✔ Compatible with Panasonic S5, S5C, S5M2, S5M2X, S5M2N, S5M2XN, S5DN, S5DH, S1H, S1RM, S1R, S1M, S1, G95, G91, G91H, G91M, G90M, G90H, G90, FZ10002, G9, G9L, G9M, G9M2M, G9M2L, G9M2, GH5, GH5L, GH5S, GH5M, GH5M2, GH5M2L, GH5M2M, GH6, GH6L, GH6M; G85, G81M, G81H, G81, G80M, G80, G70H, G70M, G70K, G70W, GX8K, GX8M, GX8A, GX8H, GX8, GX7, GX1, GH4RH, GH4R, GH4, GH3, GH2, GH1, GF1, G10, G7H, G7K, G7M, G7, GH7, GH7L, GH7M, G6H, G6K, G6M, G6, G5, G3, G2, G1, G9M2M, G9M2L,G9M2 GH7, GH7L, GH7M; FZ2500, FZ2000, FZ1000, FZ1000 II, FZ330, FZ300, FZ200, FZ150, FZ100, FZ50S, FZ50K, FZ50, FZ30K, FZ30, FZ20S, FZ20 | ✔ Compatible with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, 510UZ, 550UZ, 560UZ, 565UZ, 570UZ, 590UZ, 810UZ, XZ-1, XZ-2, Stylus 1, 1s, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25. ( NOTE: NOT FIT Olympus OM-1, OM-5, E-M1X, E-M1 II, E‑M1 III, E-M5 III, E-M10 III, E-M10 IV) | ✔ Timing setting can be accurate to 0.1 seconds. 5 setting for timing control: Delay (Self timer), Interval (Interval timer) and Long (exposure timer), N (number of frames setting); BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 4 modes for shutter release control: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) | ✔ Reduce camera shake and allows you to trigger your camera wirelessly up to 60 metres. You can change different shutter release cable to work with different cameras. Replaces olympus RM-UC1 remote cable control, panasonic DMW-RSL1 and DMW-RS2GK remote control shutter. Wireless and wired operations | ✔ With LCD display, very convenient to get accurate shooting modes setting information, easy to operate on a sunny day or in the dark.

✔ Replaces Fujifilm RR-90. Compatible with Fujifilm GFX50S, X-Pro2, X-H1, X-T2, X-T1, X-T10, X-T20, X-T100, X-E2S, X-E2, X-E3, X-M1, X-A20, X-A5, X-A3, X-A2, X-A1, X-A10, X100F, X100T, X70, X30, XQ2, XQ1, XF10, FinePix S1. ( NOTE: NOT FIT Fujifilm GFX 50S II, GFX 100, GFX 100S, GFX100 IR, GFX50R, X-Pro3, X-T3, X-T4, X-T30, X-T30 II, X-T200, X-A7, X-E1, X100V ) | ✔ Timing setting can be accurate to 0.1 seconds. 5 setting for timing control: Delay (Self timer), Interval (Interval timer) and Long (exposure timer), N (number of frames setting); BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 4 modes for shutter release control: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay) | ✔ Reduce camera shake and allows you to trigger your camera wirelessly up to 60 metres. Wireless and wired operation | ✔ With LCD display, very convenient to get accurate shooting modes setting information, easy to operate on a sunny day or in the dark.

Camcorder LANC controller compatible with Sony PXW-Z280, Z190, Z90, Z150, z100，Z1C, Z5C, Z7C, X160, X180, FS5, FS7, FS5M2, FS7M2, FS7H, FS700, FS100, FX1E, FX7E, FX1000, 190P, 198P, HD1000, HXR-MC88, MC2500, MC1500, MC1 500C, MC2500C, NX70, NX80, NX100, NX200, NX5R, NX5C, NX70C, FDR-AX700, AX2000E | Camcorder LANC controller compatible with Canon G70 G60 G50 G40 G30 G26 G21 G30 G20 XA70 XA75 XA60 XA65 XA50 XA55 XA40 XA45 XA30 XA35 XA20 XA25 XA11 XF705 XF605 XF405 XF400 XF305 XF300 VIXIA HF, XF315, XF310, XF205, XF200, XF105, XF100, ME200S-SH | 【Available functions】wirelessly Start/Stop video recording, control adjustable zoom, IRIS, and focus controls without touching the camcorder. A vibration-free controller ensures steady shooting | 【Fingertip control】Easily clip the remote to your camcorder’s tripod for handy operation. The LANC controller contains a remote control, a receiver and a cable with LANC connector. Plug and play. Support wireless and wired operation | 【Design features】1) 2.4GHz technology, stable, syncs quickly and automatically at a distance of 164 feet. 2) With LCD display, very convenient to get accurate shooting setting information, easy and clear to handle. 3) The remote control is powered by AAA batteries that are easy to get. The receiver doesn't need battery

Please make sure set the drive mode of the camera to remote control. This bluetooth remote only compatible with Canon EOS 90D, EOS R3, EOS R, EOS RP, EOS R5, EOS R5 C, EOS R6, EOS R7, EOS R10, 200D, 200D II, 250D, 6D Mark II, 77D, 800D, 850D, EOS M6 Mark II, M50, M50 Mark II, M200, PowerShot G5X Mark II, G7X Mark III, SX70 HS, Rebel SL2, Rebel SL3, Rebel T7i, Rebel T8i and PZ-E1 power zoom adapter | BR-E1 Wireless remote shutter release enables the camera operations to be performed wirelessly, including shooting still photos (support shutter release and 2-sec delay release ) and videos, focusing with AF and zooming. The remote requires no line of sight to the camera. You can use the remote to control the camera in any direction. The bluetooth wireless remote control has a good range, i was able to use it as far as approx. 10 m/32.8 ft in any direction | The bluetooth shutter release easy to set up and use. Reliable performance. Eliminate vibration and increase image clarity with this wireless remote for Canon cameras. This wireless bluetooth remote control makes it exciting to take selfies, group and steady shots hands-free! Post amazing photos and videos on Snapchat, Instagram, Facebook or YouTube with the help of this shutter | LIGHTWEIGHT AND CONVENIENT TO CARRY - The remote is easy to store. You can bring it anywhere! Just slip it in your pocket and keep it on a keychain. It comes with an adjustable wrist strap for quick access when in use | For Zooming feature, the PZ-E1 Power Zoom Adapter is required. The wireless remote compatible with PZ-E1 Power Zoom Adapter for remotely zooming