▶ Dash Cam Power cable is upgraded, the Printed Circuit Board is added to the connector of this Mini USB, this let the current be more stable, and extend the service life of the device. | ▶ Our mini USB charging cable use high quality 22# pure copper core wire with a thickend diameter of 3.5mm, it fits all the devices charging by Mini USB connector. | ▶ This Mini B cable does not support data sync, it only supplies power to devices with MINI usb connector,such as dashcam,Garmin Nuvi GPS,mirror cam,GPS Navigation and etc. | ▶ Before ordering this dash cam charger cord,please pay attention to the facing direction of the USB connector in the picture, if the direction is opposite, this USB cable may hit dash cam, gps or mirror cam holder. | ▶ Take care of connector's type and the length before order. This is mini USB 11.5ft long cable, we also have Mini USB 6.5ft cable and Micro USB 11.5ft cable, if you need, please contact us.

【Applicable Car Models】This dash cam power adapter is suitable for Chevy/Chevrolet : Malibu/BOLT EV/Equinox/Traverse/Blazer/Colorado/Silverado 1500/Silverado 2500/3500 HD/Canyon/Suburban, Tahoe/Cruze/Sonic/Trax GMC : Sierra 1500/2500/3500 HD/, Buick : Encore/Envision/LaCrosse/Verano/Regal/Cascada/Enclave Cadillac : Escalade/XT5/XT6/SRX, and etc. Vehicle must be equipped with auto-dimming rearview mirror, if you don't find your car model, please search in the detailed model list. | 【Effortless Installation for Dash Cam Charger Cable Adapter】Our dash cam adapter get power from the auto-dimming rearview mirror. Plug the connector with pins of this dash cam hardwire kit into the rear view mirror power socket, then connect your dash cam/mirror camera/GPS to the USB adapter end, then that is done! Plug and play, no need to make permanent modifications to your vehicle, no need to hide long wires, and no more unsightly power cords interfering with your view. | 【2 USB Outputs for our Dash Cam Power Adapter】Our mirror to dashcam power adapter is equipped with two USB adapter output ports, each of which is connected to a 12V to 5V step-down module, and supports up to 5V-3A output. Allow the auto-dimming rearview mirror to power two devices at the same time, such as dash cam, mirror camera,for Garmin GPS, e-dog, cell phone charging station with wireless charging function, and so on. | 【3 Different USB Cables to Match Multiple Devices】This hardwire kit for dash camera include one 90 degree left angled mini USB cable, one 90° down angled mini USB power cable, and one 90° left Angled Type-C power cable, which let this rear view mirror power adapter fit 98% of dash cam, mirror camera and GPS on the market. The specialized 90-degree angle design of the USB charger cable make the space in the car more tidy. If you need other length of USB charging cord, please contact us. | 【Professional Services】We specialize in producing accessories for car video equipment, if you need one dashcam adapter for other car models, please contact us and we will recommend the right one for you.

▶ The Printed Circuit Board is added to the connector of this GPS charger cable,this let the current be more stable, and enhance the matching between the GPS and car power supply, extend the service life of the GPS. | ▶ Use high quality 22# pure copper core wire with a diameter of 3.5mm. | ▶ This Gps power cable only supplies power to GPS, it does not support data sync. | ▶ Mini USB Cable Compatible with all Mini USB device like Garmin Nuvi 50lm 2595lmt 140 200 200w 205 205w 215t 250 250w 255 255w 260 260w 265t 265wt 270 275 275t 295w 300 310 350 360 370 40lm 465 465lmt 465t 670 680 750 755t 760 765t 775t 780 785t 805 885t 1100 1100lm 1200 1250 1260t 1300 1300lm 1300lmt 1350lmt 1350t 1370 1370t 1390 1390lmt 1390t 1480t 1490 1490lmt 1490t 1690t 2250 Garmin P/N 010-11478-03 010-10723-14, etc. | ▶ Take care of connector's type and the length before order. This is mini USB 6.6ft long cable, we also have mini USB 11.5ft cable and micro USB 11.5ft cable, if you need, please contact us.

【2pcs 18AWG GPS Charging Cable】We use 3.5mm diameter 18AGW high-specification pure copper shielded cable to reduce current loss and ensure sufficient charging efficiency (normal charger cable diameter is about 2.8mm). 2pcs pack, easy to deal with more usage scenarios. | 【Magnetic Ring】This usb charger cable for Garmin GPS is equipped with an upgraded anti-interference magnetic ring, so that the current will not be affected by the magnetic field generated by the surrounding equipment or cars, which can improve the service life and stability of Garmin GPS. | 【PCB Board】In order to improve the compatibility with various models of GPS, this gps power cord replacement adopts the same PCB board as the original Garmin GPS power cord, which enhances the compatibility with various models of GPS, plug and play. | 【90° Downward Bend】The unique downward bend design of the Mini connector allows the car charger of Garmin GPS to be angled to perfectly match your device, reducing cable twist and saving you space. | 【Charging Only】This mini usb charging cable is for charging only and does not support data transfer.This GPS charger cable is compatible with Garmin Nuvi 2250 2539LMT 2555LMT 2557LMT 2559LMT 2589LMT 2595LMT 2597LMT 2599LMTHD 2639LMT 2689LMT 2699LMT 2699LMTHD; 50LMT 50LMTHD 51LM 51LMT-S 52LM 55LM 55LMT 570LMT 57LM 60LMT 60LM 61LMT-S 660LMT 67LM 67LMT 770LM

【2 Pack】6FT of mini USB cables for Garmin GPS navigator devices.2 cables give you more options for replacing your stock cable and more convenience for using your device wherever you like. | 【Voltage Regulator Module】The addition of a printed circuit board at the connector of the GPS charger cable enhances the match between the GPS and the vehicle's power supply, resulting in a more stable current that extends the life of the GPS. | 【90 Degree】The unique 90-degree right-angle connector is designed for tight corners, making it easy to connect your device in limited spaces (such as inside a car) and reducing excessive cable bending. | 【22 Pure Copper】The charging cable is made of 22-gauge pure copper wire and reinforced connector, 3.3mm large diameter wire is more longlasting and heavy-duty to provide a stable charging rate for your device. | 【Universal Mini USB】Suitable for car GPS navigator, dashboard camera, rearview mirror camera, reverse camera, etc. Partial model list of compatible devices:This gps charger cord replacement compatible with Garmin Nuvi 2250 2539LMT 2555LMT 2557LMT 2559LMT 2589LMT 2595LMT 2597LMT 2599LMTHD 2639LMT 2689LMT 2699LMT 2699LMTHD;50LMT 50LMTHD 51LM 51LMT-S 52LM 55LM 55LMT 570LMT 57LM 60LMT 60LM 61LMT-S 660LMT 67LM 67LMT 770LMTHD;140 200 200W 205 205W 215T 250 250W 255 255W 260 260W 265T 265WT 270 275 275T 295W 300 310 350 360 370 40LM 465 465LMT 465T;500 510 50LM 550 650 660 670 680 750 755T 760 765T 770 775T 780 785T 805 850 855 880 885T.

【Continuous Upgraded 1080P AHD Backup Camera】After launching three car backup cameras, PixelMan further upgrade and launch the new reversing camera PMD2A-S. This car camera use the latest chip special for reversing camera made in Japan, this chip not only has excellent image output, but also has stunning performance under strong light and dark light. Strict in details and only make the best products is what PixelMan pursues. It is also essential to you, isn't it? | 【Support HD and AHD switching】This upgraded back up camera even supports HD and AHD switching. Each optimization improves the definition, signal stability, waterproof performance, durability, installation, etc. Our vehicle backup camera can be switched to AHD signal output to achieve 1080P display (Under the premise that the screen supports AHD signal). | 【1/2.7in AHD 1080P Large Chip Adopted in This Reverse Cam】The chip size determines the amount of reversing camera output pixels, compared with 1/4in chip used in ordinary backup cam, the most apparent feature is the enhanced brightness and color saturation besides of the sufficient clarity. The colors become more vivid and true, the increased brightness makes the images more clearly, meanwhile, the night vision effect also be enhanced, you can back the car easily without extra light at night. | 【170° Wide Angle Optical Glass HD Lens】The lens is the core component of the reverse camera for car. The HD lens used in PMD2A-S wide angle backup camera is very different from ordinary lens in appearance, it has a larger aperture and a stronger sense of technology. High transmittance glass, fish eye appearance, F1.4 aperture, all these features directly determine the wide angle, maximum output pixels and night vision performance of the license plate camera. | 【Back Up The Car Easily】Whether it is day or night, you can see almost everything behind the car when reversing, PixelMan camera for car reverse will let your driving easier and safer. Isn’t it what you need? | 【IP69 Lifetime Waterproof of PixelMan PMD2A-S Rear Camera for Car】 According to the analysis of vehicle rear camera reviews, 80% of rearview cameras stop working because the plastic housing expands or contracts in different seasons, which lead to aging and water ingress. To avoid this problem, PixelMan PMD2A-S reverse camera adopts a sturdy alloy housing, together with Nano waterproof glue, ensure the internal components isolated from outside. | 【Sturdy Alloy Housing】First put the lens and PCB in the alloy housing, then fill and seal with Nano waterproof glue, in any weather, high or low temperature, PMD2A-S reverse camera is waterproof for lifetime. In the unlikely event of water coming in, we will provide a brand new backup cam for you. | 【Perfect Installation】The PixelMan PMD2A-S auto back up camera has 2 mounting brackets which support 2 mounting options. The sturdy bracket makes the reverse camera stay stable after installation. The license plate bracket can be installed on the back of license plate without drilling holes in the car body, only the camera part is exposed after installing, which achieves the hidden installation. With the newly designed Mini alloy housing, it is very beautiful after installation. | 【Premium Thick Copper Core Wire】The power cable of the backup camera uses a thick copper core wire, it is more convenient to connect. Installation tools and accessories are included. | 【Please Note】This backup camera has RCA connector, it fit the screen system with RCA input, this back up camera does not work with dash cam, mirror camera. Please confirm the connector type of the screen before order.

【18 AWG Galvanized Copper Thick Shielded Mini Cable】Ordinary Mini cable generally use thinner 24 AWG wire, we use 18 AWG galvanized copper shielded wire, this greatly reduces the resistance and voltage drop, and also enhances the stability of the current. In addition, the shielded wire substantially reduce the influence of the external electromagnetic field on the power supply, and the equipment is more stable in use. | 【Built-in PCB Board】The same PCB board as the original Garmin charger is implanted in the Mini connector, so that this Mini USB charging cable offers simple connection to a variety of devices. This Mini USB cable is only a power cable, don't support data transfer. | 【Upgraded Anti-interference Magnetic Ring Design】The magnetic ring on the USB power cord can effectively resist current interference and suppress high-frequency noise, thereby improving the stability of the equipment and prolonging its service life. | 【Down-bending Mini USB Interface】The direction of the Mini USB interface is the same as that of the original Garmin GPS charger. To ensure a smooth connection, please note the length of this mini USB GPS vehicle power cable and the facing direction of the mini USB interface when using it for other devices. The length of the USB charging cable is 5 ft. | 【Specially Designed for Garmin GPS Navigator】This Mini USB power cord specially designed fit for Garmin GPS, it is also compatible with mini usb charging device, is suitable for Garmin zumo and Garmin nuvi,Garmin Drive 50 51 52 61, Garmin DriveSmart 51 55 61 65，Garmin RV 785 890，Garmin dezl OTR700，Garmin dezl 580 LMT-S 780 LMT-S，Garmin Nuvi 2539LMT, Garmin Nuvi 50lm 2595lmt 140 200 200w 205 205w 215t 250 250w 255 255w 260 260w 265t 265wt 270 275 275t 295w 300 310 350 360 370 40lm 465 465lmt

【18AWG GPS Charging Cable】We use 18AWG shielded high specification pure copper cable with a diameter of 3.5mm (ordinary charger cables are used 22-24AWG, wire diameter of about 2.8mm). Reduced current loss, ensured sufficient charging efficiency. | 【Magnetic Ring】This power cable for garmin GPS comes with an upgraded magnetic ring, which is a very important anti-interference component that has a good shielding effect on high frequency interference signals and can enhance the life of the GPS. | 【PCB Board】The built-in PCB board is the same as the original GPS power cord, improving the quality and stability of the GPS charger cable, enhancing the compatibility with various models of GPS, which can be plug and play. | 【90° Downward Bend】The interface of this charging cable for Garmin GPS is designed with a downward bend, which does not conflict with other usb power cables and makes your car space more neat and tidy. The soft PVC shell can be freely bent to protect the GPS power cord from abrasion during bumps. | 【GPS Charger Cable Only】This usb cable does not support data transfer and is suitable for various devices with USB to Mini interface. And please note the connector type and angle to match your GPS before purchase.This GPS charger cord replacement compatible with Garmin Nuvi 2250 2539LMT 2555LMT 2557LMT 2559LMT 2589LMT 2595LMT 2597LMT 2599LMTHD 2639LMT 2689LMT 2699LMT 2699LMTHD;50LMT 50LMTHD 51LM 51LMT-S 52LM 55LM 55LMT 570LMT 57LM 60LMT 60LM 61LMT-S 660LMT 67LM 67LMT 770LMTHD;140 200 200W 205 205W 215T 250 250W 255 255W 260 260W 265T 265WT 270 275 275T 295W 300 310 350 360 370 40LM 465 465LMT 465T;500 510 50LM 550 650 660 670 680 750 755T 760 765T 770 775T 780 785T 805 850 855 880 885T.

【90° Bend Down】The Mini interface adopts the unique downward bending design, which makes the angle of this charging cable of Garmin GPS match perfectly with GPS, and does not conflict with other devices or USB power cables. | 【Magnetic Ring】This dedicated power cord for Garmin GPS is equipped with an upgraded magnetic ring, which is very important for shielding high frequency interference signals, and can improve the service life and stability of Garmin GPS. | 【Built-in PCB Board】 To improve compatibility with various GPS models, this power cable for Garmin GPS uses the same PCB board as the original GPS power cord for Garmin , plug and play, with unparalleled stability. | 【Longer 9.8ft GPS Charging Cable】We use high specification pure copper shielded wire, the longer charger cable can be used in more usage scenarios, the PVC shell can be bent freely and protects the charging cable for Garmin GPS from abrasion during bumps. | 【Charging Only】This Mini USB power cable for Garmin GPS does not support data transfer, suitable for all kinds of USB to Mini interface devices. Please note the connector type and angle to match your GPS before purchase. This GPS charger cable is compatible with Garmin Nuvi 2250 2539LMT 2555LMT 2557LMT 2559LMT 2589LMT 2595LMT 2597LMT 2599LMTHD 2639LMT 2689LMT 2699LMT 2699LMTHD; 50LMT 50LMTHD 51LM 51LMT-S 52LM 55LM 55LMT 570LMT 57LM 60LMT 60LM 61LMT-S 660LMT 67LM 67LMT 770LM

▶【2024 Upgraded Stainless Steel】Now the material of Pixelman backup camera license plate mount is upgraded to stainless steel, all the metal parts are made of high-quality stainless steel, and even the screws equipped are also made of stainless steel, which comprehensively improves durability and stability of this license plate camera mount. This rear view camera mount generally fit the rear cameras included in dash cam kit. Replace the small mount with license plate mount, easier to install. | ▶The distance between the two screw holes of this back up camera bracket is 13mm, please confirm the distance between the two screw holes of your reversing camera is 13mm as well. | ▶This bracket mount is rear view camera accessory, this backup camera license plate mount includes license plate bracket, rearview camera holder and installing screws. | ▶This is a universal rear camera bracket, you just need to make sure that the distance between the two screw holes of your rear camera is 13mm, then buy it with confidence. | ▶This rear view camera bracket can be only applied to US car license plates. Please note that do not install your backup camera upside down, you should test picture before installing.