Control Single or Multiple Lumix Flashes | Combination Transmitter/Receiver | ControlTL Automatic TTL Exposure | High Speed Sync and HyperSync | 52 Channels, 3 Groups

CONNECTIONS: From 1/8" (3.5mm) stereo miniphone to Sony's multi/micro USB port | CABLE LENGTH: 3' (91cm) straight | WEIGHT 1.6 oz (.045kg) | COMPATIBILITY: All PW Radios. For complete list of compatible radios visit Manufacturer's Website

Pocket Wizard Motor Drive Cords connect to the camera's remote cable socket, and enable your Pocket Wizard radio slave SET to trigger the camera's shutter.This cable is 3' long, and will trigger Canon T3-type cameras, such as EOS 1N/RS, A2/E, 630.

For camera's with Canon's E3 remote shutter release terminal or other sub-miniphone cameras | Cable Length: 3 Foot (91 CM) straight | Connection: From 1/8" (3.5 MM) mono miniphone to 3/32" (2.5 MM) stereo sub-miniphone | PocketWizard Compatibility: Plus II, Multimax with NO Acc Port. For newer radios, use the CM-E3-ACC cable

For remotely triggering Nikon cameras with a 10-pin remote shutter release terminal | MSMM Adapter Included | Can be used with PTMM Adapter allowing you to keep the camera awake | Use N10-ACC-D200 cable for Nikon D200 or D100 with MB-D100

From 1/8" (3.5mm) mono miniphone to locking PC male terminal | Cable Length: 5' (1.5 m), coiled | For connecting a PocketWizard radio (including FlexTT5/FlexTT6) to any flash equipped with a locking or non-locking PC terminal | For connecting a camera or lens PC terminal to a transmitting PocketWizard radio (except MiniTT1 and Flex TT5/FlexTT6)

10 CHANNELS: 10 Standard Channels easily selected using intuitive dial | POCKETWIZARD COMPATIBLE: Compatible with all STANDARD Channel Transmitters and Recievers with Legacy Firmware | AUTO-SENSING TRANSCEIVER: Radio instantly and intelligently switches between transmitter and receive modes | RANGE AND RELIABILITY: Range and reliability you'd expect from PocketWizard | AUTO-RELAY MODE: Let's you trigger a remote camera in sync with remote flashes using only 3 PocketWizard Radios

10 CHANNELS: 10 Standard Channels easily selected using intuitive dial | POCKETWIZARD COMPATIBLE: Compatible with all STANDARD Channel Transmitters and Recievers with Legacy Firmware | AUTO-SENSING TRANSCEIVER: Radio instantly and intelligently switches between transmitter and receive modes | RANGE AND RELIABILITY: Range and reliability you'd expect from PocketWizard | AUTO-RELAY MODE: Let's you trigger a remote camera in sync with remote flashes using only 3 PocketWizard Radios

Minolta motor drive connector to 1/8" (3.5 mm) Stereo Miniphone Male. | Cable length: 3 Feet (91.5cm) | Designed for PocketWizard FlexTT5, Plus III and MultiMAX with ACC port. | Features "stereo" | Miniphone and enables photographers to remotely toggle On/Off a camera's pre-release function like using the camera's shutter release button.

Pre-Trigger Remote Cable | For connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal | From 1/8"" (3.5 mm) stereo miniphone | To Sony or Minolta remote shutter release terminal compatible with S-RMS1AM | Cable lengths: 1' (30 cm)

Compatible with Plus III, MultiMAX and MultiMAX II PocketWizard radios ONLY | Can be used with PTMM Adapter to keep the camera awake