【Low voltage protecting OBD power adapter】Built-in intelligent programmable chip that automatically detects the battery voltage and provides low voltage protection.when the vehicle voltage is lower than 11.6V, or the voltage you set,it will automatically cut off the power output to ensure the normal start of the vehicle. | 【3A current output】The OBD power cable have 3A current output ensures the stability of the current and can be applied to more dash cam.Because when your dash cam requires a current of more than 2A, the ordinary hardwire kit will be unable to start dash camera when used. | 【24/7 Parking Surveillance】When the car is turned off and stationary for 10 minutes, the OBD power cable will turn off the ACC power supply, and the dash cam will enter 24-hour parking monitoring mode 【Note】For dash cam with Time-lapsephotography function needs to be turned on Time-lapsephotography function. | 【OBD Constant Power Cable】5V voltage output, maximum output current 3A, dual USB interface, provide multiple charging methods for in car devices, widely compatible with dash cam dvr, mirror recorder,moble phone, tablets etc. | 【Easy Installation and Use】The OBD power cord comes with a standard OBD interface, the installation is more convenient and simpler,plug and play without damaging the car circuit,and there is no need to pay for installation.

【Based on Market Research】Car manufacturers are always focus on the next few years, launching necessary innovations, so that we can see more and more vehicles with USB Type-C in the market! For example, BYD, Audi, Dodge, BMW, Mercedes Benz, Tesla, Toyota. | 【USB Type C Interface】Due to market updates, most cars also have Type C interfaces with fast charging protocols of PD3.0 and above. In order to meet the demand of radar detectors, we have been continuously striving，so we have specially developed the 2nd Type C radar detection cable with PD3.0. | 【Industry Leading Update】The radar detector cable adopts a new chip encryption technology.When the cable is connected to the C-type car charger, it can supply power to the radar detector, supporting PPS/PD3.0/PD2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCP | 【Stable Working Performance】High Quality bold Copper,radar detector cable use a diameter of 3.5mm thicker pure copper wire,effectively reduce the current loss, to ensure sufficient charging efficiency. | 【Widely Compatible】This radar detectors power replacement cable can power radar detectors with phone type jacks(RJ11). Compatible with Uniden R1/R3/DFR8/ Escort MAX 360/Escort Passport/Cobra DualPro 360/Road Scout/Radenso XP/ Beltronics STI/Whistler and other RJ11 Plug radar detectors.

✅Upgraded Material: The Pocket Radar mount is made of imported zinc alloy material, which is more resistant to falling and durable than plastic brackets. | ✅Widely Compatible: The sports radars bracket can directly install Pocket Radar, mobile phones, and Portable Charger Power Bank on the bracket. After stretching, the diameter increased from 2 in to 4.13 in. | ✅Unique Design: 100% protection for the sports radars, with silicone anti slip pads added internally to protect the contact area and increase friction. Even without a protective shell, it ensures that your device avoids scratches. | ✅Easy to install: When using, simply adjust the bracket to the appropriate position, install the sports radars on the tripod, and then insert the device for use. | ✅Simple and Portable: The pocket radar holder can be placed in your backpack or pocket to carry with you. If you have any questions, we will be online 24/7 to service for you.

【Radar detector cable】Replacement the charging cable with RJ11 connector on the radar detector, USB to RJ11 plug charger power cable supply specially powered for 12V radar detectors | 【DC 5V USB Input to 12V RJ-11 Output】Professional custom chips that boost up from 5v to 12v at USB A 2.0 ports for connect cigarette lighter, car chargers and more. It is very suitable to power your radar detector through the car's USB plug. | 【Compatible】Radar Detectors power replacement cable suitable for Uniden R1/3/4/7/A1-R1/3/7/DFR8/9、Escort MAX 360、Passport 7500/8500/9500i/Max X80、Cobra DualPro 360、Radenso XP、Beltronics STI、Pro500、Vector、Beltronics GT-1、Express 795 | 【Stable Working Performance】The radar detector cable adopts a new chip encryption technology.When the cable is connected to the car charger, it can convert the voltage of the USB interface into the starting voltage of the radar detector,giving you all around protection wherever your go. | 【High Quality Copper Material】We use a diameter of 3.5mm thicker pure copper wire,effectively reduce the current loss, to ensure sufficient charging efficiency.The soft PVC shell can be freely bent, avoid winding, not easy to damage.

【Radar detector cable】Replacement the charging cable with RJ11 connector on the radar detector, USB to RJ11 plug charger power cable supply specially powered for 12V radar detectors | 【DC 5V USB Input to 12V RJ-11 Output】Professional custom chips that boost up from 5v to 12v at USB A 2.0 ports for connect cigarette lighter, car chargers and more. It is very suitable to power your radar detector through the car's USB plug. | 【Compatible】Radar Detectors power replacement cable suitable for Uniden R1/3/4/7/A1-R1/3/7/DFR8/9、Escort MAX 360、Passport 7500/8500/9500i/Max X80、Cobra DualPro 360、Radenso XP、Beltronics STI、Pro500、Vector、Beltronics GT-1、Express 795 | 【Stable Working Performance】The radar detector cable adopts a new chip encryption technology.When the cable is connected to the car charger, it can convert the voltage of the USB interface into the starting voltage of the radar detector,giving you all around protection wherever your go. | 【High Quality Copper Material】We use a diameter of 3.5mm thicker pure copper wire,effectively reduce the current loss, to ensure sufficient charging efficiency.The soft PVC shell can be freely bent, avoid winding, not easy to damage.

【Radar detector cable】Replacement the charging cable with RJ11 connector on the radar detector, USB to RJ11 plug charger power cable supply specially powered for 12V radar detectors | 【DC 5V USB Input to 12V RJ-11 Output】Professional custom chips that boost up from 5v to 12v at USB A 2.0 ports for connect cigarette lighter, car chargers and more. It is very suitable to power your radar detector through the car's USB plug. | 【Compatible】Radar Detectors power replacement cable suitable for Uniden R1/3/4/7/A1-R1/3/7/DFR8/9、Escort MAX 360、Passport 7500/8500/9500i/Max X80、Cobra DualPro 360、Radenso XP、Beltronics STI、Pro500、Vector、Beltronics GT-1、Express 795 | 【Stable Working Performance】The radar detector cable adopts a new chip encryption technology.When the cable is connected to the car charger, it can convert the voltage of the USB interface into the starting voltage of the radar detector,giving you all around protection wherever your go. | 【High Quality Copper Material】We use a diameter of 3.5mm thicker pure copper wire,effectively reduce the current loss, to ensure sufficient charging efficiency.The soft PVC shell can be freely bent, avoid winding, not easy to damage.

✅【DC 5V USB Input to 12V RJ-11 Output】Professional custom chips,can automatic recognition and matching voltage function,that boost up from 5v to 12v at USB C PD3.0 ports for connect cigarette lighter, car chargers and more. It is very suitable to power your radar detector through the car's USB plug. | ✅【Extra-Long for a Perfect Fit】The radar detector cable can effectively stretch to a length of 6.56ft, suitable for most radar detector installation positions.【Note】This vehicle power cable is able to provide a steady power only, ant it do not provide live traffic function，Not applicable to Valentine One | ✅【 Radar Detector Cable 】 The USB C charging cable works best when paired with a USB C car charger, specifically designed for radar detectors with RJ11 interfaces. Tiny thumb-sized body of type C car charger perfectly fits and sits snugly with most cigarette lighters, freeing up more space and providing you comfortable aesthetic | ✅【All Metal, Smaller and Safer】The high-density aluminum alloy shell can help the car charger to dissipate heat in the charging process, effectively improving the charging efficiency by about 30%, and absolutely no melting and danger. The all-metal body also has a unique sense of design and luxurious texture. | ✅【Widely Compatible】This radar detectors power replacement cable can power radar detectors with phone type jacks(RJ11). Compatible with Uniden R1/3/4/7/A1-R1/3/7/DFR8/9、Escort MAX 360、Passport 7500/8500/9500i/Max X80、Cobra DualPro 360、Radenso XP、Beltronics STI、Pro500、Vector、Beltronics GT-1、Express 795 | ✅【Technical Support】 The radar detector charging cable supports products with PPS/PD3.0/PD2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCP chip technology, providing more charging options and allowing you to enjoy your journey to the fullest,Go get it!

【Enhanced Suction Cup Stability】The transparent, double-sided adhesive pads, featuring a precision-crafted 0.39-inch center opening,are tailor-made to enhance the vacuum seal and grip of suction cups,compatibility with radar detector suction cup mounts, Garmin Nav devices,dash cam and phone holders. | 【Long-Lasting Durability】Offer long-lasting adhesive strength and reliability,this design ensures devices like radar detector suction cup mount remain securely in place on your vehicle’s dashboard or windshield, even in demanding driving conditions. | 【Strong Sticky Adhesive】These extra strong both side clear adhesion pads' stickiness is stronger than ordinary adhesive. They offer powerful fastening capabilities,remaining enduring bond that withstands high temperatures and vibrations, guaranteeing stable and reliable device mounting. | 【Easy to Use】To maximize adhesive contact, please clean the dashboard or windshield surface before use and let it dry,free of impurities. Repeatedly pressing down on the adhesive can increase the contact between the double-sided adhesive and the surface of the dashboard or windshield. please wait for 24 HOURS for optimal use. | 【Compatible With Suction Cup Items】There are 3Pcs 2.2in and 3Pcs 2.6in round clear stick adhesive pads packaged for connecting the radar detector mount to the car dashboard or windshield.You can cut into any smaller size if you need,compatible with most suction cup dashboard mount and other windshield mount, GPS holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.