【Compatible Models】RONFEN NP-FW50 DC coupler dummy battery USB-C cable PD adapter kit compatible with cameras Sony NEX series SLT-A series Alpha series DSC-RX10 series, ILCE …, Such as Sony Alpha A6500 A6400 A6300 A6100 A5100 A7 A7II A7RII A7SII A7S A7S2 A7R A7R2 RX10 II III IV NEX-3 NEX-5A NEX-5C NEX-6 NEX-7 ZV-E10. Suitable for most 7.2V-8.4V and 9V cameras. ★portable design for travel. This NP-FW50 dummy battery USB-C adapter kit is much smaller and lighter than the AC-PW20 adapter. | 【Functions】NP-FW50 NPFW50 DC coupler dummy battery USB-C cable kit connects to an PD quick charger / adapter to power your camera from an AC outlet. Useful for lengthy studio shoots with no need to continuously replace and recharge multiple batteries. It can also be an outdoor accessory specially developed for Sony enthusiasts when it is connected to power bank supply, to provide uninterrupted power for your camera. Replace carrying multiple NP-FW50 batteries. | 【Specifications】USB-C Input: 20W or above, Compatible with 18W 30W 45W 60W 65W PD Chargers, DC Output: 7.2~9.0V, 2~3A, Extra Long 1.2M Adapter AC/DC Coupler cords. External Power Supply: Power Delivery USB Type C Wall chargers / adapters, portable PD power banks, PD car chargers. Type-c power delivery port output requirements: 9V 2A, 3A is better, DC to DC Output: 7.2V~8.4V (The current output size depends on your camera lenses and shoe-mount flashes.) This product is CE FCC and ROHS certified. | 【ADVANTAGES】★RONFEN PD-BX Convertor has power status indicator and integrates 2 chips, one to identify PD and QC3.0/4.0 power, the other for 9V-24V wide voltage input. After the step-down treatment, the regulated output has overvoltage, overheat and short circuit protection functions.★The USB-C input PD power mode will get more power than USB Type-A power supply. Compared to the AC-PW20 ac power adapter kit, the DC drive cable serves to effectively suppress harmonic current noise (buzzing/hum). | 【IMPORTANT】The power of the PD charger/adapter must be between 18W~65W. Only support 18W 30W 45W 60W 65W PD Wall charger / PD mobile power supply / PD Car charger, do not use other devices, otherwise the camera will be damaged. This device is only used to power the camera, Do not connect other devices at the same time, Otherwise it will cause insufficient power supply. Not workable with LAPTOP TYPE C Output. Certain cameras may consume higher current, please use a high-performance power supply.

【Compatible Models】RONFEN DR-E18 DC coupler LP-E17 dummy battery USB-C cable PD adapter kit replace ACK-E18 ac power adapter, compatible with cameras Canon EOS Rebel SL3 SL2 T6i T6s T7i T8i 77D RP 200D 200D II 250D 750D 760D 800D 850D 8000D 9000D Kiss X10i Kiss X10 Kiss X9i Kiss X9 Kiss X8i. Using a wide range, fit for most 7.2V-8.4V and 9V cameras. ★Compact portable lightweight design for outdoor & travel. This DR-E18 USB-C adapter kit is much smaller and lighter than ACK-E18 ac power adapter. | 【Functions】DR-E18 DC Coupler USB-C cable kit replaces LP-E17 battery and connects to an PD quick charger / adaptor to power your camera from an AC outlet. Useful for lengthy studio shoots with no need to continuously replace and recharge multiple batteries. It can also be an outdoor accessory specially developed for Canon enthusiasts when it is connected to power bank supply, to provide uninterrupted power for your camera. Replace the camera battery grip BG-E18 or carrying multipe batteries | 【Specifications】USB-C Input: 30W or above, Compatible with 18W 30W 45W 60W 65W PD Chargers, DC Output: 7.2~9.0V, 2~3A, Extra Long 1.2M Adapter AC/DC Coupler cords. External Power Supply: Power Delivery USB Type C Wall chargers / adapters, portable PD power banks, PD car chargers. Type-c power delivery port output requirements: 9V 2A, 3A is better, DC to DC Output: 7.2V~8.4V (The current output size depends on your camera lenses and shoe-mount flashes.) This product is CE FCC and ROHS certified. | 【ADVANTAGES】★The RONFEN PD-BX Convertor has power status indicator and integrates 2 chips, one to identify PD and QC3.0/4.0 power, the other for 9V-24V wide voltage input, After the step-down treatment, the regulated output has overvoltage, overheat and short circuit protection functions.★The USB-C input PD power mode will get more power than USB Type-A power supply. Compared to the ACK-E18 ac power adapter, The DC drive cable serves to effectively suppress harmonic current noise (buzzing/hum). | 【IMPORTANT】The power of the PD charger/adapter must be between 18W~65W. Only support 18W 30W 45W 60W 65W PD Wall charger / PD mobile power supply / PD Car charger, do not use other devices, otherwise the camera will be damaged. This device is only used to power the camera, Do not connect other devices at the same time, Otherwise it will cause insufficient power supply. Not workable with LAPTOP TPYE C Output. Certain cameras may consume higher current, please use a high-performance power supply.