Two-stream MU-MIMO 2x2:2 for simultaneous downlink transmissions to multiple Wave 2 client devices. | Concurrent dual-band (5GHz/2.4GHz) support, 867 Mbps (5 GHz) and 300 Mbps (2.4 GHz) of user data rate. | Up to 4dB of signal-to-interference and noise (SINR) improvement and up to 10dB of interference mitigation. | Novel channel selection approach delivering up to 50 percent capacity gain over alternative background scanning. | Supports up to 512 clients, 802.11ac Wave 2, POE (Power Over Ethernet) (No POE or power adapter included) For deployment of multiple access points, a controller (sold separately) is highly recommended. Controller-specific features (such as Smart Mesh networking) are unavailable when the AP is running a standalone AP base image.

MIMO 2x2:2, dual-band 867 Mbps (5 GHz) and 300 Mbps (2.4 GHz) of user throughput | Up to 4dB of statistical BeamFlex gain and up to 10dB of interference mitigation | Capable of supporting up to 100 clients per access point, supports multicast IP video streaming | Up to 2x to 4x increase in Wi-Fi signal coverage, WPA-PSK (AES), 802.1X support | Blazing fast 802.11ac speeds, 802.3af Power over Ethernet (PoE) Power adapters sold separately

Ruckus PoE Adapter - Power Injector | Designed for Zoneflex Indoor Access Points | Supports 10-/100-/1000-Mbps data connections | Great for quick and efficient data transfers | Please see the description for compatiblity

Two-stream MU-MIMO 2x2:2 for simultaneous downlink transmissions to multiple Wave 2 client devices. | Concurrent dual-band (5GHz/2.4GHz) support, 867 Mbps (5 GHz) and 300 Mbps (2.4 GHz) of user data rate. | Up to 4dB of signal-to-interference and noise (SINR) improvement and up to 10dB of interference mitigation. | Novel channel selection approach delivering up to 50 percent capacity gain over alternative background scanning. | Supports up to 512 clients, 802.11ac Wave 2, POE (Power Over Ethernet) (No POE or power adapter included) For deployment of multiple access points, a controller (sold separately) is highly recommended. Controller-specific features (such as Smart Mesh networking) are unavailable when the AP is running a standalone AP base image.