SUNLU Standard Resin, 405nm UV Light Curing Resin for LCD 3D Printer, 3D Printing Photopolymer Resin, Low Shrinkage and Fast Curing, 1000G. 

SUNLU resin is a liquid that can harden into a solid polymer, containing the photoinitiator that cures when it absorbs UV light (UV radiation) from a resin printer (or resin curing machine).

-

Packing Listing

• A bottle of 1KG resin
• Disposable funnel

-

Resin Storage Methods

• Please store away from sunlight, as sunlight contains ultraviolet rays which will cure the photosensitive resin.
• It is recommended to store the resin in a cool dry place at 15-35°C. Resin viscosity will become higher when the temperature gets lower.
• Please keep it sealed to avoid dust or moisture affecting the print quality.

-

Matters Needing Attention

• Usage period: use within one year for best results.
• This product is not edible, if swallowed by mistake, please seek medical attention immediately.
• Do not use resin in places exposed to sunlight.
• Please shake well before use, it is recommended to shake upside down for three times.
• Wear gloves, protective masks and other protective equipment when using photosensitive resin.
• Please clean the printed resin model with high-concentration alcohol for about 30S.
• It is recommended to use a 95% concentration of alcohol or more to clean the printed model, the higher the better.
• In order to obtain better results, the cleaned(alcohol has dried) model can be secondarily cured.
• Do not pour resin from the container into the unused resin.
• Do not leave the resin in the container for a long time without using it, to prevent the resin from being contaminated.