Compact and lightweight with a wrist strap design, ideal for security camera installers and technicians | Works with IP cameras, analog cameras, TVI, CVI, AHD cameras, as well as for testing 4K H. 264 /H. 265 | PoE (24W) and DC power output (12V/3A) | 4-inch IPS touchscreen monitor with a 800x480 resolution | Network tests include Ping, IP Scan, Port Flash, and Link Monitor; Supports Hikvision/Dahua/ACTi and more than 30 protocols | Included Components: 8066, Battery, Ac Adapter/Charger, Connecter Cables (4), Wrist Strap, Carry Case

No need to buy multiple testers, the CamView IP Pro-D works with the most popular IP and Analog cameras, up to 8MP (IP camera must be ONVIF compliant; Analog camera must be AHD 2.0, CVI 3.0, or TVI 3.0) | Works with or without a network; the built-in DHCP server allows you to Set and Assign IP addresses to cameras, Auto-detect IP settings on networks, Ping, Sniff, List Subnet | Analog NTSC/PAL and HD Video Generator; take screenshots and video recordings, the high definition, 1080P display makes it easy to review playback and reports | H.265 IP Camera Tests include Discover the Camera, View Camera's Video, Configure Camera's Parameters, and more | Ethernet Tests include 10M/100M/1G Ethernet Link Test, Packet Loss Test, Ethernet Loop Detection, and more

Camera Tester with 7" Retina touch screen, advanced capabilities, and up to 16 hour battery life | 8MP TVI, 8MP CVI, 8MP AHD, H.265, H.264, and 4K camera testing with PTZ control; HDMI input and output supports up to 1080p | Network testing includes Ping, IP scan, Port Flash, DHCP server, Trace Route; Dual 1000M LAN ports, to check network bandwidth, packet loss or error data | Built-in Wi-Fi analyzer with 2.4G signal strength tester and hot spot generator; Chrome browser included | 4x Zoom to enlarge on screen image, screen snapshot, screen record, save, view, record and playback video; 24W, 48V DC PoE Power output / DC 12V 3A

Triplett tools | Cammie elite | Power security cameras with 12 volt/1 amp | Country of origin: Switzerland

Compact and lightweight with a wrist strap design, ideal for security camera installers and technicians | Works with IP Cameras, Analog cameras, TVI, CVI, AHD cameras, as well as for testing 4K H. 264/H. 265 | PoE (24W) and DC power output (12V/3A) | 4-Inch IPS touchscreen monitor with a 800x480 resolution | Network tests include Ping, IP scan, port flash, and link monitor; supports Hikvision/Dahua/Acti and more than 30 protocols

Works with SD Analog, AHD 3. 0, HD-CVI 3. 0, HD-TVI 3. 0, H. 264, H. 265 IP, NTCS/PAL, and all ONVIF enabled IP cameras; Network testing includes: Network Sniff, Subnet List and Ping Test | Built-in DHCP server to set up IP Cameras before the network is even Wired; Wi-Fi connection for wireless cameras or to create a Wi-Fi hotspot | RS485 PTZ control; adjust the camera's settings, record still images or video, you can even check the audio signal from the camera if it is equipped with a microphone | 25W PoE and 12VDC camera outputs; USB, BNC, RJ45 and HDMI ports | TR and RJ45 cable tests; built-in video test image generator | Included components: li-ion battery (2); ac adapter; ethernet, bnc, microusb/usb, rs485, audio, 12v

Designed for long UTP runs up to 1640 feet with several in-line connection points (transmits video only; does not transmit PoE) | Detachable terminal blocks for UTP cable | Works with HD-TVI, HD-CVI, a HD, and NTSC/PAL cameras | 2MP resolution | Power supply not included

Designed for long UTP runs up to 1148 feet with several in-line connection points (transmits video only; does not transmit PoE) | Detachable terminal blocks for UTP cable | Works with HD-TVI, HD-CVI, a HD, and NTSC/PAL cameras | 2MP resolution | Power supply not included

Real-time 4x4 HD-TVI, CVI, AHD Color Quad processor | Four Composite video inputs, one main output, and one Sub output | Table mount design | High-performance 5MP (1080p) resolution | View up to 4 cameras from a single monitor

4-channel passive balun with RJ45 and detachable terminal blocks for UTP CAT5e/6 cables | Color video max up to 787ft for 1080p (1443ft for 720p) HD-CVI; 820ft for 1080p (754ft for 720p) HD-TV; 1082ft for 960p (1050ft for 720p) HD-AHDI | Built-in TVS for surge protection; Lightning protection design grade III | 60dB crosstalk and noise immunity | ABS plastic housing

8-channel passive balun with RJ45 and detachable terminal blocks for UTP CAT5e/6 cables | Color video max up to 787ft for 1080p (1443ft for 720p) HD-CVI; 820ft for 1080p (754ft for 720p) HD-TV; 1082ft for 960p (1050ft for 720p) HD-AHDI | Built-in TVS for surge protection; Lightning protection design grade III | 60dB crosstalk and noise immunity | ABS plastic housing

Eliminates Roll bars created by different ground potential | Install at camera side | Eliminates the need to tear apart your system to search for signal disturbances caused by Loops or wiring laid too close to power lines | Necessary part of every CCTV setup | Easily added to new or existing systems

Video and power for TV I, CVI and a HD cameras over a single Coax cable | High performance 5MP resolution | Transmits up to 1300 feet | Perfect for monitoring areas where no power source is available to operate a camera | Use with gem ps-36vdc 120VAC to 36VDC power supply at the head end (sold separately)

Perfect picture At 750 feet for TV I, CVI, a HD cameras | High performance 5MP resolution | Reduces 36V/24V to 12V at the camera side | For use with gem hdhub-4, 8, 16pvp video power hubs (each sold separately) | Easily added to new or existing systems

Perfect picture up to 500 feet for TV I, CVI, a HD cameras | High performance 5MP resolution | Built-in TVs surge suppression | Lightning protection design grade III | 60dB crosstalk and noise immunity

Converts 16 coax lines, BNC jacks to a screw terminal block (video only) | Small compact unit Perfect for setups where space is a concern | Cctv video at distances up to 330 meters when used with another passive CCTV balun (up to 1500 meters when used with an active video receiver) | No power required | Built-in transient suppression

Use the gem power over coax (POC) system to transmit video, Audio, and data over existing coaxial cables | Use with gem poc-16pwp 16-port Rack-mount power over coax converter (sold separately) | Works on PoE and non-PoE cameras | Upgrade to an IP surveillance system without replacing your existing coaxial cables

Converts 8 coax lines, BNC Jacks to a screw terminal block and/or 1 RJ45 jack | Small compact unit where space is a concern | CCTV video at distances up to 330 meters when used with another passive CCTV balun (up to 1500 meters when used with an active video receiver) | No power required | Built-in transient suppression

Measures light from fluorescent, metal halide, high‐pressure sodium, and incandescent sources up to 40k Foot candles (400k Lux) | Silicon photodiode sensor with spectral response filter | Built-in real time clock | Min/Max function recalls highest and lowest readings | Data Hold freezes the reading on the display for easy viewing; low battery indicator to conserve battery life

Certificate of Calibration from the National Institute of Standards and Technology (NIST) to achieve the highest possible levels of measurement quality; Calibration can take 11-15 business days before shipment | Measures light from fluorescent, metal halide, high‐pressure sodium, and incandescent sources up to 40k Foot candles (400k Lux) | Silicon photodiode sensor with spectral response filter | Built-in real time clock; Min/Max function recalls highest and lowest readings | Data Hold freezes the reading on the display for easy viewing; low battery indicator to conserve battery life