【Convenient Design】One-handed installation and release within 2 seconds. | 【Compatibility of the headrest】The width between two metal posts on your headrest should be 4.7in-5.9in. | 【Compatibility of the device】Compatible with smartphones/ tablets/ Switch 4"-10.6". It is the screen diagonal measurement, not the width. | 【Adjustability】Multi-angle rotation to adjust for the best viewing angle. | 【Extensibility】The stretchable arm can be extended up to 10.6in.

【Statement:】Kindly note that this item is suitable for viewing or reading only. It will shake quite a bit and make you uncomfortable if you need to touch or tap the device frequently. However it is inevitable due to some law of physics. | 【Using Tips:】1.When you are holding a heavy tablet, you could try to loop the gooseneck into a "S" shape or circle shape which would provide some more stability. 2.Bend using two hands and bend just the gooseneck when adjusting the position because it is stiff. Pull the device violently when adjusting may broke the nut. 3.Also, don't overtighten the base clamp too much so it won't break easily. | 【Reinforced Bolt Clamp Base:】Reinforced and thickened base. Won’t break easily. Fit for 3 inches(75mm) thickness countertop or headboard. | 【Flexible Stiffened Arm:】Made of Aluminium-Magnesium Alloy, stiffened material, very sturdy and flexible. | 【Compatibility:】Suitable for Apple iPhone iPad or other Android Devices from 4 to 10.6 inches.

【Double Tablet Clamp】 Tryone car tablet mount holder is the first version equips with two clamps on the market, both the tablet holder mount supports 360° rotation, meet the needs of all backseat passengers | 【Fit Any Car】 Tryone car tablet mount holder is compatible with almost all autos on the market, as long as your headrest metal strip width is 1.5-7.9 inches, you can use it, and it can help you shore up your tablet/mobile phone or Switch, freeing your hands, you can enjoy the convenience and entertainment by tablet mount holder during the travel | 【Wide Compatibility】 Two car mount holders are compatible with all 4.7-12.9 inch devices, such as 12.9-inch iPad Pro, 11-inch iPad Pro, 9.7-inch iPad Air, iPad mini 1 2 3 4, Switch, Galaxy tab, Kindle fire HD, iPhone 12 Pro max to iPhone6 full range of products, and any compatible device can be very firmly fixed on the bracket | 【Scalability】 We have two clamps, one of them has an extendable stick and it can extend to the middle of the two front seats, whether you are travel alone or a family with children travel, it is your road trip essentials stuff, because people use it to soothe kids, sometimes people will also use it to enjoy their leisure personal travel time | 【Toolless Installation】 You can install it easily without any tool, also it will be secure with shockproof silicone pads, Antivibration silicone to ensure that your car will not be damaged, while the tablet holder mount can be firmly fixed so that it can easily support 12.9-inch iPad or other devices

【Best Viewing Angle】 This Tryone Car Tablet Holder is specially designed for the rear seat, the tablet holder can be adjusted left and right, with 360° rotation and 75° tilt, whether it is one passenger, two passengers or three passengers, this headrest mount will provide the best viewing position | 【Wide Compatibility】 The headrest tablet holder is compatible with all 4.7-12.9 inch devices, such as iPad Pro 9.7, 10.5, 2022 Newest iPad Pro 11, 12.9, iPad mini 3 4 5 6, iPad Air 2 3, iPad 2 3 4 5 6, iPhone 13 12 Pro XS Max XR X 6 7 8 Plus, Galaxy Tab, Surface Pro, Pixel C, Nexus 7 9, Tab E 4, Fire HD, Kindle, Switch and more | 【Fits Most Car】 The Car Tablet Holder is very easy to install and remove without tools. The two sides hooks fit headrest bars with a maximum diameter of 0.5"/1.3cm, compatible headrest spacing with a minimum width of 18.9inch/48cm, a maximum width of 31.9inch/81cm | 【Stable & Durable】 Tryone tablet holder for car is made of high-strength material, the telescopic rod is made of aluminium, and the clamp is made of ABS material, which can support your tablet stably even on bumpy roads | 【Great for Travel by Car】 It is your road trip essentials stuff, on the trip, you can use it to soothe your kids, in addition to the headrest mount, we also come with two headrest hooks that can be used to hang your backpack

【Best Viewing Angle】 This Tryone Car Tablet Holder is specially designed for the rear seat, the tablet holder can be adjusted left and right, with 360° rotation and 75° tilt, whether it is one passenger, two passengers or three passengers, this headrest mount will provide the best viewing position | 【Wide Compatibility】 The headrest tablet holder is compatible with all 4.7-12.9 inch devices, such as iPad Pro 9.7, 10.5, 2022 Newest iPad Pro 11, 12.9, iPad mini 3 4 5 6, iPad Air 2 3, iPad 2 3 4 5 6, iPhone 13 12 Pro XS Max XR X 6 7 8 Plus, Galaxy Tab, Surface Pro, Pixel C, Nexus 7 9, Tab E 4, Fire HD, Kindle, Switch and more | 【Fits Most Car】 The Car Tablet Holder is very easy to install and remove without tools. The two sides hooks fit headrest bars with a maximum diameter of 0.5"/1.3cm, compatible headrest spacing with a minimum width of 18.9inch/48cm, a maximum width of 31.9inch/81cm | 【Stable & Durable】 Tryone tablet holder for car is made of high-strength material, the telescopic rod is made of aluminium, and the clamp is made of ABS material, which can support your tablet stably even on bumpy roads | 【Great for Travel by Car】 It is your road trip essentials stuff, on the trip, you can use it to soothe your kids, in addition to the headrest mount, we also come with two headrest hooks that can be used to hang your backpack

【Upgraded Rotating Base】The Tryone team conducted extensive research on gooseneck tablet holders and phone holders available in the market. As a result, we've developed this gooseneck holder with a rotating base feature. With this innovation, you can simply press down on the flexible arm to achieve a 360° rotation, and once you've adjusted the angle, pull it up to lock it in place | 【Two collet options & Cost-effective】 To ensure you receive the best value and an exceptional experience, we offer two options: a phone clamp and a tablet clamp. Both options are designed for devices measuring 4 to 12.9 inches, including iPhones, Samsung cell phones, iPad Pro, Fire HD, Nintendo Switch, and similar devices | 【Extended Gooseneck Stand】 We've introduced a fresh upgrade to the Tryone gooseneck tablet and phone holder. By employing stronger materials, we've extended the total length to 46 inches (117 cm), all while maintaining stability. Currently, it stands as the longest gooseneck phone and tablet holder available in the market | 【Hands-Free Convenience】The gooseneck holder serves as an excellent companion for your tablet and phone, catering to a variety of scenarios. People utilize it to prop up their ipad or iphone for activities like watching movies, playing games, reading, checking recipes, and more. This liberates your hands and allows you to enjoy a leisurely and relaxed experience | 【Tips】Please note that due to its unique physical characteristics, the gooseneck bracket will produce unavoidable shaking while taking into account the flexibility and strength. This may happen when you are operating a tablet. You can use your hand to go stop or let it stop shaking by itself, this kind of shaking is normal, please understand