【High-quality Protective Cover for telescopes】It offers perfect protection for your telescope against dust and moisture. It is an ideal protection if you want to leave it outside for a short term or store it in the cellar or garage. | 【Specific Values】Matches all telescopes up to 1200mm length and 10" (254 mm) aperture mounted. Diameter at bottom: 37.6". Height of the cover: 70.87" (1800mm), total lenght: 59.1" (1500mm). | 【Thermally Stable】Silver-coloured coating on the outside - reflects light, thus preventing the telescope inside from heating up. The material retains its protective function even in extreme heat or cold. | 【Fixing Strap for Firm Closure and to Prevent it Flying Away】The fixing strap at bottom ensures a clean closing and prevents wind entering from bottom. Secure against damage from extreme winds and extremely tear-resistant under correct and moderate use. | 【Waterproof and Washable】The cover is water-repellent - the telescope stays dry even in the rain.

Stepless Temperature Regulation: This product is equipped with a stepless temperature regulation controller; by sliding the knob on the controller; you can adjust the temperature according to different needs | Widely Applicable: Can be adjusted and used according to the lens size; and is suitable for most telescopes; cameras; and other lenses with an outer diameter of less than 95mm or 3.75 inches | DC Lens Warmer: Protects the lens of your digital camera or finder scope from freezing by chilling fog and dew; enabling the devices to function properly at night when the temperature drops or places with bad weather | DC Port Design: It is very handy to use because you can connect it either to your power bank or any other power source with a DC port | Quick Use and Removal: which not only allows the defogging belt to fit your lens; but also allows you to quickly disassemble and adjust the length you need

Ideal Adapter: 1/4 inch thread connections to tripod; provides a rigid and eliminate image shake in high power binoculars; this is a great stable ideal adapter to free your hands and enhance viewing pleasure | More Stable Viewing: This base is larger than other tripod adapters; which enables it to be firmly attached to the tripod ; the unique tilting design enables it to hold any binoculars stably | High Quality And Reusable: This binocular tripod adapter is made of impact and chemical resistant aluminum alloy with good waterproof performance reusable; rugged aluminum construction provides stable hands free viewing | Various Uses: Binocular tripod adapters with international standard screws 1/4 interface are suitable for any tripod adaptable binoculars standard photography and tripod connections etc | Easy To Install: Very easy to install just connect the screw at the top to the binoculars; connect the interface at the bottom to the tripod and tighten the interface before use; allow you to use your binocular more convenient and easier

【Professional Functions】New right angle viewfinder for amateur and professional photographers,take pictures at a more comfortable angle. A must have for both amateur and professional photographers.Compatible with the Below Cameras: Can on (22MM): EOS 3/5/30/33/55 / 50D/50E Serise /Oly mpus E-300；Can on (18MM): EOS300 /EOS88QD/EOS8500N/EOS300D/EOSADI/ EOSIN /EOS60;Nikon:F4/F5/F6/F90/F100/F801/Fm2/Fm3/D100/D70/D70S/D50/F80/F50/F55/F60/F65/F70/F75/F301/F401/F501/F601/Pro nea Fuji S2Pro S3Pro; Other type: Min olta X300/X700/Dynax7D,7,807si/D ynax707si,600si classic/D yn ax9xi,5xi덩/Sam suug GX-IS/Pen tax*istD/*istDs/Pen tax SLR | 【1x-2.5x Magnification】Manually adjust between 1X and 2.5X magnification, which enables you to have access into smaller details of the view and makes you focus easier when doing macro shooting. | 【Multi Angle Adaptation】Keeps viewing correct subject position even mounted at different angle. Up, down, right, left, it can be mounted at different angle, allowing you to easily take perfect shot in your comfortable angle with correct subject position. | 【Lens Construction】9 elements in 5 groups with high quality roof prism. Diopter adjustment: Built-in (+/- 4) for variations in eyesight. With included adapter,this angle viewfinder can be mounted on many DSLR cameras. | 【Excellent Material】We use high quality material to ensure comfortable operating experience.

Ideal Adapter: L type twin 1/4 inch thread connections to tripod; provides a rigid and eliminate image shake in high power binoculars; this is a great stable ideal adapter to free your hands and enhance viewing pleasure; it is very suitable for high quality family and professional use | Stable Connection: It has the extra threaded hole in the bracket that fits the head screw and spring loaded button that most tripod heads have; this allows your heavy binoculars to be very stable on the tripod; make your binoculars complete the strong connection | Possible to Fine Tune Observation Angle: There is a certain gap between the large screw and the l type bracket; when you attach the adapter to the binoculars; you can fine-tune the angle of the binoculars with both hands to adjust the viewing field | High Quality And Reusable: This binocular tripod adapter is made of impact and chemical resistant aluminum alloy; with good waterproof performance; reusable rugged aluminum construction provides stable hands free viewing very easy to install | Various Uses: Binocular tripod adapters with international standard screws 1/4 interface are suitable for any tripod adaptable binoculars; standard photography and tripod connections etc

【High-quality Protective Cover for Telescopes】It offers perfect protection for your telescope against dust and moisture. It is an ideal protection if you want to leave it outside for a short term or store it in the cellar or garage. | 【Specific Values】Matches all telescopes up to 1000 mm length and 8" (203 mm) aperture on an mount. Diameter at bottom: 23.8". Height of the cover: 53.15" (1350mm), total lenght: 37.4" (950mm). | 【Thermally Stable】Silver-coloured coating on the outside - reflects light, thus preventing the telescope inside from heating up. The material retains its protective function even in extreme heat or cold. | 【Fixing Strap for Firm Closure and to Prevent it Flying Away】The fixing strap at bottom ensures a clean closing and prevents wind entering from bottom. Secure against damage from extreme winds and extremely tear-resistant under correct and moderate use. | 【Waterproof and Washable】 The cover is water-repellent - the telescope stays dry even in the rain.

【High-quality Protective Cover for telescopes】It offers perfect protection for your telescope against dust and moisture. It is an ideal protection if you want to leave it outside for a short term or store it in the cellar or garage. | 【Specific Values】Matches all telescopes up to 1000 mm length and 8" (203 mm) aperture on an mount. Diameter at bottom: 30.1". Height of the cover: 63" (1600mm), total lenght: 47.24" (1200mm). | 【Thermally Stable】Silver-coloured coating on the outside - reflects light, thus preventing the telescope inside from heating up. The material retains its protective function even in extreme heat or cold. | 【Fixing Strap for Firm Closure and to Prevent it Flying Away】The fixing strap at bottom ensures a clean closing and prevents wind entering from bottom. Secure against damage from extreme winds and extremely tear-resistant under correct and moderate use. | 【Waterproof and Washable】The cover is water-repellent - the telescope stays dry even in the rain.

Metal Polar Scope Adapter: The polar scope mount for the right-angle viewfinder adopts an all-metal construction and precise craftsmanship; which is sturdy enough to ensure long-lasting use | Multi-Angle Adaptation: For the combination of the viewfinder and the polar scope adapter; the multiple selection design of 360° angle and right angle 90° at will is conducive to achieving polar alignment in a more comfortable posture, thereby liberating the waist and knees from fatigue | Widely Compatibility: The polar scope adapter for the right-angle viewfinder is compatible with most polar scopes with a cylindrical eyepiece that has a height greater than 23.5 mm and a diameter ranging from 23.5 to 30 mm; it can also fit onto the polar finder of most common mounts | Lens Construction: 9 elements in 5 groups with a high-quality roof prism; diopter adjustment is built-in with ± 4 for variations in eyesight; an included adapter is provided; this angle viewfinder can be mounted on numerous DSLR cameras | 1x and 2.5x Magnification: Manually adjust the magnification between 1x and 2.5x; This enables you to access smaller details of the view and makes it easier for you to focus when doing macro shooting