🚗Function - The Tymate repeater is used to enhance the sensor signal forward to the display, in the situation that length or electronic interference prevents your monitor from receiving sensor signals. | 🚙Compatibility - Tymate repeater has 433.92 MHz working frequency. The signal booster will ONLY match to Tymate TPMS Tire Pressure Monitoring System. With repeater, it increases the signal from transmitters to the TPMS monitor which the distance is over 36 ft. | 🚌Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage | 🚕Installation - It's small and easy to install, which is suggested to install at the rear axle.Most RV they will have a place for the battery tank,the signal booster can be installed in the battery tank, so the booster power lines can direct connect with the battery. | 🚚 Working Mode - When the repeater is on, the red LED on the repeater will be on. If received sensor signal, the red LED will flash twice

[Solar Charging and USB Charging]: The Tymate Tire Pressure Monitoring System offers two convenient charging options. Equipped with a solar lithium battery panel, it autonomously charges under sunlight, ensuring continuous battery life. Additionally, it can be supplemented by USB Type C charging when sunlight is unavailable. These dual charging methods enhance the Tymate Tire Pressure Monitoring System M7-3 with 6 External TPMS Sensors, extending its standby time for prolonged usability | [Advanced Real-time Monitoring & Easy Setup]: Explore Five Alarm Modes and Easy Setup for Alarm Thresholds With the Tymate Tire Pressure Monitoring System M7-3, you'll unlock five unique alarm modes, including fast leak detection, high/low-pressure alerts, high-temperature warnings, and sensor low voltage notifications. Upon pairing, the system effortlessly sets the current pressure as the reference point, simplifying the configuration of alarm thresholds (with an Alarming Range from +25% PSI to -15% PSI of Reference Pressure) | [Extending Range with Repeaters & Ensuring Precision with Sensors]: The Tymate Tire Pressure Monitoring System M7-3 features sensors with low power consumption and extended battery life, lasting up to 2 years. With its compact size, lightweight design, and high tire pressure sensing accuracy (within an error range of no more than 3 PSI), installation is effortless. It's also designed to withstand dust, water, wind, and snow. Utilizing repeaters can further extend the sensing range beyond 50 feet, ensuring comprehensive coverage | [Upgraded Color LCD Display and Live Monitoring]: The Tymate Tire Pressure Monitoring System M7-3 features an intelligent Color LCD screen that automatically adjusts backlighting in varying light conditions, ensuring clear data display. With real-time monitoring capabilities, it provides simultaneous display of data from all 6 sensors, allowing drivers to easily access tire pressure and temperature information whenever needed | [Energy-Saving Mode and Vibration Activation]: If the vehicle remains stationary for 10 minutes without charging, the Tymate Tire Pressure Monitoring System M7-3 will enter power-saving mode automatically. During this mode, the display will turn off, and no sensor data will be received. Simply press any key or vibrate the display to activate the system again, bringing the Tymate Tire Pressure Monitoring System M7-3 with 6 External TPMS Sensors back to standby mode

[Discover Five Alarm Modes and Simple Setup for Alarm Thresholds]: With the Tymate Tire Pressure Monitoring System M7-3, you'll access five distinct alarm modes, covering fast leak detection, high/low-pressure alerts, high-temperature warnings, and sensor low voltage notifications. Upon pairing, the system seamlessly configures the current pressure as the reference point, allowing for easy setup of alarm thresholds (with an Alarming Range from +25% PSI to -15% PSI of Reference Pressure) | [Efficient Power Usage and Precise Data Reading Sensors]: The Tymate Tire Pressure Monitoring System M7-3 boasts four advanced external sensors known for their low power consumption (operating for up to six months on a single CR1632 battery) and extended lifespan (with a maximum of two years). These sensors are compact, lightweight, and offer high accuracy in tire pressure readings, with minimal margin for error (approximately 3psi). Their easy installation and resilience make them suitable for use in challenging environments. All sensors included in the package are pre-labeled and paired with the monitor at the factory, there is no need to pair each sensor before use. | [Versatile Charging Options]: The Tymate Tire Pressure Monitoring System M7-3 features solar automatic charging capabilities, ensuring continuous power supply. Additionally, it offers flexibility by supporting charging via USB port or cigarette lighter (adapter not included) when sunlight is unavailable. This ensures you can stay focused on driving without worrying about TPMS battery levels | [Adaptive Backlight and Enhanced Color LCD Display]: The Tymate Tire Pressure Monitoring System M7-3 features automatic backlight adjustment, optimizing visibility in varying light conditions for effortless reading. Furthermore, its newly updated vibrant color LCD display ensures brighter and clearer readings, even during nighttime driving, safeguarding your tires at all times | [Extensive Pressure Range Detection & Extended Signal Transmission]: Tymate M7-3 provides precise tire pressure detection ranging from 0 to 87 PSI, catering to various vehicles such as sedans, SUVs, MPVs, pickup trucks, RVs, and travel trailers. Operating at a frequency of 433.92MHz, this tire pressure monitoring system offers robust signal transmission, guaranteeing consistent and reliable communication between sensors and the display unit. Please note: For toeing longer trailers(total length≥36ft), we highly recommend using the Tymate repeater in conjunction with this system

[Accurate Real-time Monitoring & Multi-Alert System]: Tymate TM7 TPMS can be used to monitor your tires’ pressure and temperature data within robust accuracy of ±1.5 PSI or ±3°F (The units can be displayed as ℃ or ℉ & BAR or PSI). Designed with six distinct alarm modes: high/low pressure, fast leakage, high temperature, sensor low battery, and sensor signal lost. This system is a reliable tool for maintaining tire health, and it is especially beneficial for DIY enthusiasts and pre-owned vehicle markets, where constant vigilance on tire conditions is paramount for safety and vehicle longevity | [Easy Plug-in Power & Dual USB Charging]: Tymate TM7 effortlessly powers up by plugging directly into your vehicle's cigarette lighter socket, eliminating the need for complex wiring or professional installation. Ideal for older vehicles lacking factory-installed TPMS, providing a quick and efficient safety upgrade for drivers. Also, This innovative tire pressure monitor not only ensures your safety on the road but also features two USB outlets, allowing you to charge mobile devices like smartphones and tablets. A perfect solution for commercial vehicle operators and budget-conscious drivers seeking added functionality without sacrificing vehicle space or convenience | [Color LCD with Adjustable Backlight]: This device provides clear, easy-to-read tire pressure and temperature data in any light condition, thanks to the vibrant color LCD screen with adjustable backlight. This feature caters to all drivers, particularly those who commute daily or embark on long trips, ensuring visibility and readability at all times | [Wide Pressure Range Detection & Long Signal Transmission]: Tymate's TM7 accurately detects tire pressures from 0 to 87 PSI, offering versatility for a variety of vehicles such as sedan car, suv, mpv, pickup truck, rv, and travel trailer (The system automatically calibrates to the center tire pressure, using sensor installation pairing for accurate reference values). Operating at a frequency of 433.92MHz, this tire pressure monitoring system boasts a robust transmission range. It ensures consistent, reliable communication between sensors and the display unit. Note: We highly suggest to utilize this system with Tymate RP05 repeater for toeing longer trailer(total length≥36ft) | [Easy to Use & Professional After-sale Service]: This Tymate TM7 TPMS is easy to setup in 5 minutes. The package box comes with comprehensive user’s manual and there are guide video available from the product page for you to follow steps by steps in the sensor pairing process. If you still have any questions about the product, please contact us for further assists