Add a bold and unique appearance to your headlights with the VViViD Adhesive Headlight Tint! This adhesive backed vinyl is designed to wrap your vehicle’s headlights or taillights, giving you a unique look that won’t effect the vehicle underneath, This film is incredibly easy to install by hand and will impart an incredibly smooth, glass-like finish once complete. Installation guide: 1) Measure the dimensions of your headlight and cut the vinyl to the required size, adding two inches of material to every side. 2) Clean your headlight with any mild automotive cleaner, ensuring to remove all dust and debris. Allow the headlight to dry completely. 3) In a spray bottle, make a mixture of water and a few drops of baby shampoo or mild dish soap. Thoroughly wet the headlight with this mixture. 4) Drape the vinyl over the headlight and, using a squeegee and working out from the centre, carefully squeegee out all of the liquid under the film, paying careful attention to push out any and all water bubbles. 5) Using an exacto or precision cutting blade, remove any excess vinyl from around the headlight. 6) Heat the film with a heat gun or hair dryer, and allow to cure for 24 hours.