✅【IP Camera Tester Parameters】4 inch 800*480 resolution 8MP TVI/8MP CVI/8MP AHD/4K H.265 IP /CVBS,H.265/H.264, 4K video display via mainstream | ✅【Multi-function Tools】Auto view video and create testing report, DC12V 3A and 48V PoE power output, max 30W, | UTP cable tester, UTP cable, telephone cable etc order and connectivity test, can save testing report, if special number, need customized. RJ45 cable TDR test, test cable pair status, length, attenuation, reflectivity, impedance, skew etc | ✅【Durable Tester】7.4 V /2400mAh Lithium Ion Polymer Battery, after 4~5 hours charging, working time lasts 7 hours | ✅【Efficient】CCTV installers often need to carry a variety of testing tools to complete their work. If take the all in one camera tester, making working conditions safer and increasing productivity. | ✅【100% Satisfaction Guarantee】We tested every cctv camera tester before we sent it to the Amazon warehouse, to ensure that you will not receive defective products. Wanlutech offer 24h technical support and 1 year warranty.

[ Upgraded IP Analog Camera Tester ] WANLUTECH 8K IP camera tester has 7'' touchscreen, 1280x800 resolution. It support to test max 8K 32MP 4K 12MP IP cameras, support CVBS analog camera test. The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IPC Test /IP Discovery/Rapid Video/RTSP Play /Quick OVIF/Hik DH test tool/Client APK. Support 1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt). Support CVBS loop test, the tester send and receive color bar generator signal, check BNC cable | [ AHD TVI CVI SDI Camera Tester ] WANLUTECH IP camera tester with poe support to test max 8MP SDI/AHD/TVI/CVI/CVBS camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. Support color bar generator, output one channel PAL/NTSC color bar video signal | [ Cable Tester ] Cable Tracer: Searching for BNC cable, network cable and telephone cable from cluttered cables,also can search shield cables. RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables | [ PoE & Network Test Tools & WIFI ] IP Camera Tester with PoE, support PoE IEEE802.3af/at , max 48V, power output 30W. Network Test Tools: built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. WI-FI analyzer(2.4GHz frequency band) support to analyse wi-fi signal strength,channel,channel level, support create WI-FI hotspot | [ Multifunction CCTV Camera Tester ] Power Management: support to check the real-time voltage, power, status of Power output and power input port. Drop-down menu, Media player, including 8GB TF card, Dual Gigabit Ethernet Ports, HDMI in/out, VGA in, Audio in/out, RS485 port. Power input:DC12V 2A. Power output:DC12V/3A, DC24V/2A, DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

[ IP Camera Tester with PoE ] WANLUTECH 8K IP camera tester (Model:H20-MOVTADHSEF) temporarily powers the high-power PTZ camera or other devices supported by the IEEE 802.3af/at/bt standard protocol, max 90W poe power output. It support to test max 8K 32MP 4K 12MP IP cameras. Support CVBS analog camera test,1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt). The CCTV tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IP Discovery/4CH ONVF/IPC test /RTSP play /Client APK | [ SFP & DMM & OPM & VFL & Distance Meter ] It has two gigabit SFP optical fiber module ports, support insert SFP optical fiber module, for optical fiber network testing. Digital Multimeter: DC and AC voltage measurement, DC and AC current measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement. Optical Power Meter: It is used for both direct measurement of optical power and relative measurement of fibre link loss. Visual Fault Locator: It is used to determine fibre continuity and fault location. Distance Meter: It has several measurement modes, and support export data, support benchmark switch | [ AHD CVI TVI SDI Coaxial Camera Test ] WANLUTECH IP camera tester with poe support to test max 8MP AHD TVI CVI SDI camera. Using "AUTO HD" app can automatically recognize AHD/CVI/TVI/CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. Support to measure video signal level(peak level, SYNC level, burst level). Support color bar generator. Multiple preview APP supports synchronized preview of multiple cameras, playback of the camera 2 to 3 frames per second, up to 16 simultaneous preview | [ Cable Tester & Network Tools ] Cable Tracer: Searching for BNC cable, network cable and telephone cable from cluttered cables,also can search shield cables. RJ45 Cable TDR Test: It can test cable pair status, length, attenuation, reflectivity, impedance, skew. TDR Cable Breakpoint Short Circuit Test: BNC cable, network cable, telephone cable, RVV cable and TVVB elevator cable, cat 5/6 cable’s length(up to1.2 KM ) and short circuit. Built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc | [ Multifunction CCTV Monitor Tester ] 8'' touch screen, 2048x1536 resolution. WiFi analyzer: Support to analyse wifi signal strength,channel,channel level, built-in dual-band 2.4G/5G WIFI, max rate 433.3M, receive wireless network camera images, etc. Measurement POE switch or PSE power supply voltage and cable connection status. Dual Gigabit Ethernet Ports, HDMI in/out, VGA in, Audio I/O, RS485, Built-in camera,support camera focus detection. Built-in 3350 mAh battery, power input:DC15V 2.4A, power output:DC12V/3A, DC24V/2A, DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

[ IP Analog Camera Tester ] 5.4'' IPS touch screen,IP Discovery/Quick ONVF/IPC test /RTSP play /Client APK.Auto view the video, create testing report.Support batch activate Hik and DH cameras and modify IP address, modify password etc. Self-defined modify channel name. Supports CVBS analog camera test.1 channel BNC input, NTSC/PAL (Auto adapt); PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols | [ TVI CVI AHD SDI Camera Tester ] WANLUTECH CCTV monitor tester supports 8MP TVI / CVI / AHD / SDI camera testing and UTC control, and supports calling OSD menu. Auto HD -recognize the resolution and image display of Analog and HD cameras. Support coaxial PTZ and call OSD menu. Support CVBS and 8MP TVI/CVI/AHD cameras. Select relative function on the right side toolbar to operate, functions including ''Photos'', ''Snapshot'', ''Record'', ''Playback'', ''PTZ'', ''Set''. Multiple preview APP supports synchronized preview of multiple cameras, playback of the camera 2 to 3 frames per second, up to 32 simultaneous preview | [ Multifunctional Camera Tester ] 1 channel HDMI input, support 4K 30FPS;1 channel VGA input. Support 48V PoE power output, max power 30W. Built-in 7.4V Li-ion battery, 3350mAh. DC12V/3A power output, supply temporarily power for the camera. Network tools: Ping, IP scan, Port Flash ,DHCP server, Trace Route. Built in Wi-Fi, display image from the wireless camera, create WIFI hotspot | [ Cable Test ] UTP Cable Tester: support test UTP cable connection status and display on the screen. RJ45 cable TDR testing: test cable pair status, length, attenuation, reflectivity, impedance, skew | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

[ OTDR Fiber Optic Tester ] WANLUTECH OTDR combines necessary fiber optic testing in one handheld device. OTDR test: wavelength 1310nm/1550nm, dynamic range 34dB/34dB. Quick Setup mode: quickly set wavelength, distance range, pulse width and measurement duration; Parameters Set mode: professional technicians can set the wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold and other parameters before testing, which will get more accurate curve results. As well, it is for maintenance and installation of 4K IP camera, analog camera, HD coaxial (8MP AHD, CVI, TVI) cameras | [ OPM VFL LS OLS Event map ] OPM (Optical Power Meter: Calibrated Wavelength 850/1300/1310/1490/1550/1625nm); VFL (Visual Fault Locator:10mW output power, 650nm wavelength, max test range 8KM); LS (Light Source:mode CW/270 Hz/330 Hz/1 kHz/2 kHz); OLS (Optical Loss Test: It is used to test the insertion loss of optical passive devices); EVENT MAP: Visualise the results of fibre optic link inspections. Save and view the testing curves, support zoom and move curves, view details | [ CCTV Camera Tester & Cable Tester ] It support to test max 4K 12MP IP cameras, support CVBS analog camera test. The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support to test max 8MP AHD/TVI/CVI/CVBS camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. RJ45 cable TDR test, test the open and short status of the network cable, test cable length, max test 600M. Support searching for BNC cable, network cable and telephone cable from cluttered cables | [ Network Test Tools & PoE & Wifi Analyzer ] Built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. PoE Detection: measurement POE switch or PSE power supply voltage and cable connection status. Support PoE IEEE802.3af/at , max 48V, power output 30W. Wifi Analyzer, Support 2.4G frequency band, wifi connection, wifi list, wifi information, wifi signal strength detection | [ Multi-function Tester ] More feature: 5.4'' IPS touch screen, 1920x1152 resolution, power management, one gigabit Ethernet 10/100/1000M Port, HDMI in, VGA in, audio in/out, RS485 port, etc. Power output: DC24V/2A, DC12V/3A,DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

[ Upgraded IP Analog Camera Tester ] WANLUTECH 8K IP camera tester has 7'' touchscreen, 1280x800 resolution. It support to test max 8K 32MP 4K 12MP IP cameras, support CVBS analog camera test. The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IPC Test /IP Discovery/Rapid Video/RTSP Play /Quick OVIF/Hik DH test tool/Client APK. Support 1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt). Support CVBS loop test, the tester send and receive color bar generator signal, check BNC cable | [ AHD TVI CVI Camera Tester ] WANLUTECH IP camera tester with poe support to test max 8MP AHD/TVI/CVI camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. Support color bar generator, output one channel PAL/NTSC color bar video signal | [ Cable Tester ] Cable Tracer: Searching for BNC cable, network cable and telephone cable from cluttered cables,also can search shield cables. RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables | [ PoE & Network Test Tools & WIFI ] IP Camera Tester with PoE, support PoE IEEE802.3af/at , max 48V, power output 30W. Network Test Tools: built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. WI-FI analyzer(2.4GHz frequency band) support to analyse wi-fi signal strength,channel,channel level, support create WI-FI hotspot | [ Multifunction CCTV Camera Tester ] Power Management: support to check the real-time voltage, power, status of Power output and power input port. Drop-down menu, Media player, including 8GB TF card, Dual Gigabit Ethernet Ports, HDMI in/out, VGA in, Audio in/out, RS485 port. Power input:DC12V 2A. Power output:DC12V/3A, DC24V/2A, DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

[ Upgraded IP Analog Camera Tester ] WANLUTECH 8K IP camera tester has 7'' touchscreen, 1280x800 resolution. It support to test max 8K 32MP 4K 12MP IP cameras, support CVBS analog camera test. The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IPC Test /IP Discovery/Rapid Video/RTSP Play /Quick OVIF/Hik DH test tool/Client APK. Support 1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt). Support CVBS loop test, the tester send and receive color bar generator signal, check BNC cable | [ AHD TVI CVI SDI Camera Tester ] WANLUTECH IP camera tester with poe support to test max 8MP SDI/AHD/TVI/CVI/CVBS camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. Support color bar generator, output one channel PAL/NTSC color bar video signal | [ Cable Tester ] RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables | [ PoE & Network Test Tools & WIFI ] IP Camera Tester with PoE, support PoE IEEE802.3af/at , max 48V, power output 30W. Network Test Tools: built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. WI-FI analyzer (2.4GHz frequency band) support to analyse wi-fi signal strength,channel,channel level, support create WI-FI hotspot | [ Multifunction CCTV Camera Tester ] Power Management: support to check the real-time voltage, power, status of Power output and power input port. Drop-down menu, Media player, including 8GB TF card, Dual Gigabit Ethernet Ports, HDMI in/out, VGA in, Audio in/out, RS485 port. Power input:DC12V 2A. Power output:DC12V/3A, DC24V/2A, DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

【IP Analog Camera Tester】WANLUTECH IP camera tester with PoE, it support max 90W POE power output, temporarily powers the high-power PTZ camera or other devices supported by the IEEE 802.3af/at/bt standard protocol. DC15V power intput. It has 8'' touchscreen, 1920*1200 resolution. It support to test max 4K 12MP IP cameras, support CVBS analog camera test. The CCTV tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IPC Test/IP Discovery/Rapid Video/RTSP Play /Quick OVIF/Hik DH test tool/Client APK. It has a gigabit SFP optical fiber module port, support insert SFP optical fiber module, for optical fiber network testing. | 【AHD TVI CVI Camera Tester】WANLUTECH CCTV camera tester supports to test max 8MP AHD/TVI/CVI/CVBS camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. | 【Cable Tester】RJ45 Cable TDR Test: it can test cable pair status, length (up to 180meters), attenuation, reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables, test length max 3000meters. | 【Multifunction CCTV Monitor Tester】RJ45 Dual Gigabit Ethernet ports, 10/100/1000Mbps adaptive, HDMI in, VGA in, Audio I/O, RS485, WiFi analyzer. Network Tools: IP scan, PING test, PPPOE, trace route, link monitor, DHCP server, port flashing, etc. PoE++ Detection: measurement POE switch or PSE power supply voltage and cable connection status. Power Management: check real-time voltage and power of POE++, DC12V, DC24V power output and PSE input, DC15V power input. | We are the manufacturer, so you don't have to worry about technical support and after-sales service. If you have any questions, please let us know. You will hear back from us within 12 hours.

[ IP Camera Tester ] WANLUTECH IP camera tester with PoE, it support max 90W POE power output, temporarily powers the high-power PTZ camera or other devices supported by the IEEE 802.3af/at/bt standard protocol. DC15V power intput. It has 8 inches touch screen. Support IP Discovery/Quick OVIF/IPC test/Rapid Video, auto view the video, create testing report. It has a gigabit SFP optical fiber module port, support insert SFP optical fiber module, for optical fiber network testing | [ Camera Test Tools & Network Tools ] The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, support to self-defined modify channel name, factory reset, etc. Network Tools: Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor | [ Cable Tester ] RJ45 Cable TDR Test: it can test cable pair status, length (up to 180 meters), attenuation(only network cables exceeding 10 meters can be used for testing), reflectivity, impedance, skew. UTP Cable Tester: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables, test length max 3000 meters | [ Multifunctional CCTV Camera Tester ] The OS of IPC tester is Android. WIFI Analyzer: support to analyse wifi signal strength,channel,channel level, support to create WI-FI hotspot. PoE Detection: measurement POE switch or PSE power supply voltage and cable connection status. Power Management: check real-time voltage and power of POE, DC12V, DC24V power output and PSE input, DC15V power input. Data monitor: Captures and analyzes the command data from controlling device, also can send hexadecimal. Power input:DC15V, Power output:DC12V/3A, DC24V/2A, DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

✅【Professional IP Camera Tester】5.4'' IPS touch screen, 1920x1152 resolution.IP Discovery/IPC test /RTSP play /Client APK.Auto view the video, create testing report.Support batch activate Hik and DH cameras and modify IP address, modify password etc. Self-defined modify channel name.It can quickly change H.264 and H.265 video, open wide dynamic mode. Factory restore, etc. | ✅【Analog Camera Tester】WANLUTECH IPC tester supports CVBS analog camera test.1 channel BNC input, NTSC/PAL (Auto adapt); PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols such as for PELCO-D, PELCO-P, Samsung, Panasonic etc. | ✅【HD CCTV Tester】WANLUTECH CCTV monitor tester supports 8MP TVI(3840 x 2160P 12.5/15 FPS) / CVI(3840 x 2160P 12.5/15 FPS) / AHD(3840 x 2160P 15F) / EX-SDI, HD-SDI, 3G-SDI camera testing and UTC control, and supports calling OSD menu. | ✅【Multifunctional Camera Tester】1 channel HDMI input, support 4K 30FPS;1 channel VGA input, support 1920 x 1200P 60FPS. 48V PoE power output, max power 30W. Built-in 7.4V Li-ion battery, 3350mAh.Output DC12V/3A power out, supply temporarily power for the camera.CCTV installers often need to carry a variety of testing tools to complete their work. If take the all in one camera tester, making working conditions safer and increasing productivity. | ✅【Cable Test】Support UTP cable testing and RJ45 cable TDR testing.Digital Cable tracer can search BNC cable, network cable and telephone cable from the mess of cables. Cable search and UTP cable can test at the same time.Keep browsing our pages and you will get more detailed parameters.WANLUTECH offer 24h technical support and 1 year warranty. | ✅【100% Satisfactory Customer Service】 WANLUTECH has been committed to providing high quality products and satisfactory customer service. We are the manufacturer, so you don't have to worry about technical support and after-sales service. If you have any questions, please let us know. You will hear back from us within 12 hours.

[ Upgraded IP Analog Camera Tester ] WANLUTECH Upgraded 8K IP camera tester has 7'' touchscreen, 1280x800 resolution. It support to test max 8K 32MP 4K 12MP IP cameras, support CVBS analog camera test. The IP camera tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc. Support IPC Test /IP Discovery/Rapid Video/RTSP Play /Quick OVIF/Hik DH test tool/Client APK. Support 1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt). Support CVBS loop test, the tester send and receive color bar generator signal, check BNC cable. Support to measure video signal level(peak level, SYNC level, burst level) | [ AHD TVI CVI SDI Camera Tester ] WANLUTECH IP camera tester with poe support to test max 8MP AHD/TVI/CVI/SDI camera. Using "AUTO HD" app can automatically recognize AHD CVI TVI CVBS cameras and display resolution and frame rate on the screen, supports UTC control & call OSD menu, menu settings, screenshot, video recording, video playback, etc. Support color bar generator, output one channel PAL/NTSC color bar video signal | [ Cable Tester ] Cable Tracer: Searching for BNC cable, network cable and telephone cable from cluttered cables,also can search shield cables. RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. TDR Cable Breakpoint Short Circuit Test: BNC cable, network cable, telephone cable, RVV cable and TVVB elevator cable, cat 5/6 cable’s length(up to1.2 KM ) and short circuit. Cable Length Test: Measure the breakpoint position of (open circuit status) BNC cables, RJ45 network cables, RJ11 cables | [ DMM & PoE & OPM & VFL ] Digital Multimeter: DC and AC voltage measurement, DC and AC current measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement. PoE power output, support PoE IEEE802.3af/at , max 48V, power output 30W. Optical Power Meter: connecting the measured fiber to the "OPM" port displays the optical power linearly or nonlinearly for direct measurement of optical power, as well as for relative measurement of fiber link loss. Red Visible light source: It can emit a red light source to detect faults such as breakage, cracking, and bending of fiber optic cables | [ Multifunction CCTV Camera Tester ] Built-in porfessional network testing tools,such as Ping, IP scan, DHCP server, PPPOE, Trace Route, Port Flash, LLDP, Link Monitor, etc. Support to analyse wifi signal strength,channel,channel level, etc. It can create WI-FI hotspot. Measurement POE switch or PSE power supply voltage and cable connection status. Power Management: support to check the real-time voltage, power, status of Power output and power input port. Dual Gigabit Ethernet Ports, HDMI in/out, VGA in, Audio I/O, RS485 port, including 8GB TF card. Power input:DC12V 2A. Power output:DC12V/3A, DC24V/2A, DC5V/2A | [ PLEASE NOTE ] There is a paper piece isolating the battery. Before using the tester, open the battery cover and remove the paper sheet. We are the manufacturer. Any questions, please let us know, We'll get back to you within 12 hours

✅【8K Camera Tester 】WANLUTECH upgraded CCTV tester has 7'' IPS touch screen, 1920*1200 resolution. It support to test 8K H.265 IP cameras, CVBS analog cameras, HD coaxial cameras(max 8MP TVI / AHD / CVI / SDI camera test), and support UTC PTZ control and call OSD menu.The IPC tester supports batch activation of DH, Hik cameras and modification of IP addresses, passwords, etc.Rapid OVIF, support face recognition and create test report. | ✅【Multifunction Test Tool】WANLUTECH IP camera tester has SFP optical module port. It supports to insert SFP optical fiber module, for optical fiber network testing and support testing of devices with SFP optical ports for direct data transmission testing.4K color bar generator, send CVI/TVI/AHD/CVBS color bar video signal for testing monitor or video cable, support 4K resolution | ✅【Cable Tester】RJ45 cable TDR test: it tests cable pair status, length, attenuation, reflectivity, impedance, skew etc. Test UTP cable connection status and display on the screen. Read the number on the screen,and detect near-end, mid-end and far-end fault test of RJ45 cable plug. | ✅【Professional CCTV Monitor Tester】HDMI input & output + VGA input. WANLUTECH CCTV tester has WIFI analysis function and it support 2.4G/5G frequency band, and detect the surrounding WIFI signal and signal strength. Support POE48V, USB5V 2A, DC12V 3A, 24V 2A power output. 7.6 V /7800mAh Lithium Ion Polymer Battery, 3.5 hours of charging, up to 16 hours of use. 8GB TF card included. | ✅【Customer Service】We are the manufacturer, so you don't have to worry about technical support and after-sales service. If you have any questions, please let us know. You will hear back from us within 12 hours.

WANLUTECH CCTV camera tester supports to test max 8MP AHD/8MP TVI/8MP CVI/CVBS camera. Using HD app can automatically recognize AHD CVI TVI cameras and display resolution and frame rate on the screen, support coaxial PTZ & call OSD menu. | CVBS video signal test, 1 channel BNC input, NTSC/PAL (Auto adapt), PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols. | Support audio test, 1 channel audio signal input, test the audio whether is normal. Built-in 3.7V/4000mAh battery. Power output: DC 12V/1A. Power input: 5V/2A. 4.3 inches screen, 480*272 resolution. Package include: 1x cctv tester, 1x 5V 2A USB charging cable, 1x BNC cable, 1x RS485 cable, 1x audio cable | We are the manufacturer, so you don't have to worry about technical support and after-sales service. If you have any questions, please let us know. You will hear back from us within 12 hours.

✅【IP Analog Camera Tester】5.4'' IPS touch screen,IP Discovery/Quick ONVF/IPC test /RTSP play /Client APK.Auto view the video, create testing report.Support batch activate Hik and DH cameras and modify IP address, modify password etc. Self-defined modify channel name. Supports CVBS analog camera test.1 channel BNC input, NTSC/PAL (Auto adapt); PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols such as for PELCO-D, PELCO-P, Samsung, Panasonic etc. | ✅【TVI / CVI / AHD Camera Tester】WANLUTECH CCTV monitor tester supports 8MP TVI / CVI / AHD camera testing and UTC control, and supports calling OSD menu. Auto HD -recognize the resolution and image display of Analog and HD cameras. Support coaxial PTZ and call OSD menu. Support CVBS and 8MP TVI/CVI/AHD cameras. Select relative function on the right side toolbar to operate, functions including “Photos”, “Snapshot”, “Record”, “Playback”, “PTZ”, “Set”. | ✅【Multifunctional Camera Tester】1 channel HDMI input, support 4K 30FPS;1 channel VGA input. Support 48V PoE power output, max power 30W. Built-in 7.4V Li-ion battery, 3350mAh. DC12V/3A power output, supply temporarily power for the camera. Network tools: Ping, IP scan, Port Flash ,DHCP server, Trace Route. Built in Wi-Fi, display image from the wireless camera, create WIFI hotspot | ✅【Cable Tracer Cable Test】Digital Cable tracer can search BNC cable, network cable and telephone cable from the mess of cables. Support test UTP cable connection status and display on the screen. RJ45 cable TDR testing: test cable pair status, length, attenuation, reflectivity, impedance, skew | ✅【Customer Service】We are the manufacturer, so you don't have to worry about technical support and after-sales service. If you have any questions, please let us know. You will hear back from us within 12 hours.

✅【IP Camera Tester Parameters】5 inch IPS touch screen ALL IN ONE CCTV TESTER IPC-5100 Plus ,1920*1080 resolution,4K 30fps HDMI input and VGA input, silicone protective shell. H.265/H.264,4K video display via mainstream,8MP TVI CVI AHD camera test | ✅【Multi-function Tools】support UTC & call OSD menu,CVBS camera test, PTZ control.Built-in WiFi,support WiFi camera test ,HIK and DH test tool etc,Upgrade Rapid ,create testing report,Auto HD app,auto recognize HD coax camera type and resolution | ✅【Multi-function Tools】support UTC & call OSD menu,CVBS camera test, PTZ control.Built-in WiFi,support WiFi camera test ,HIK and DH test tool etc,Upgrade Rapid ,create testing report,Auto HD app,auto recognize HD coax camera type and resolution | ✅【Packing Listing】①Tester ② Network cable tester ③Adaptor DC12V 1A ④Li-ion battery (7.4V DC 3350mAh) ⑤Tool bag / DC Power cable/BNC cable/ RS485 cable/ Audio cable/ wrist belt/Safety cord ⑥Manual | ✅【100% Satisfaction Guarantee】We tested every cctv camera tester before we sent it to the Amazon warehouse, to ensure that you will not receive defective products. Wanlutech offer 24h technical support and 1 year warranty.

✅【All-in-one OTDR Tester】WANLUTECH MT-6510 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm/1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz), Optical Loss Test, Event Map, RJ45 cable TDR test, etc. | ✅【Professional CCTV Camera Tester】It is not only an OTDR tester, but also a CCTV camera tester.It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of the splice, and failure location, etc. As well, built in camera tester for maintenance and installation of IP camera,analog camera,8MP TVI CVI AHD cameras.It also comes with a digital cable tracer.Support searching for BNC cables, network cables and telephone cables from a mess of cables. | ✅【OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting; professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results. | ✅【Parameters】WANLUTECH multifunctional OTDR has 5.4'' IPS touch screen, 1920*1152 resolution. OTDR fiber tester is powered by 7.4V/5200mAh Li-ion battery with long working time.Interface type: SC-PC. 1310nm/1550nm Testing Wavelength and 28dB/26dB Dynamic Range.Test Unit: m, ft. It support to detect the optical or optical components loss value. It supports HDMI input, VGA input.Keep browsing our pages and you’ll get more detailed parameters. | ✅【100% Satisfactory Customer Service】 WANLUTECH has been committed to providing high quality products and satisfactory customer service.✅ We are the manufacturer, so you don't have to worry about technical support and after-sales service.(If you need more videos about the tester's functions,please let us know)

[ CVI/TVI/AHD/CVBS to HDMI ] Our converter works with CVBS, AHD, CVI, TVI cameras( It converts security camera signals to HDMI monitor).HDMI output 1080P 60Fps, connect HDMI output cable, HD-LINK light, display yellow light.Long transmission distance (500-700 meters through coaxial cable).Different resolution, different transmission distance.It converts TVI CVI AHD CVBS BNC video signal to HDMI | [ Auto Identify Input ] WANLUTECH full hd 4k to hdmi converter is plug-and-play and can automatically identify 720P/1080P/3MP/4MP/5MP/8MP resolution, and has LED indicator to show what resolution the video input has detected | [ HDMI Port & Power Port ] WANLUTECH full HD 4k to HDMI converter has HDMI output port and DV 5V micro-USB port.The device uses 5V/1A power supply,and power indicator stays on after the converter is powered on | [ 75Ω and HI-Z Switch ] When the IN port of the converter is connected to the camera, and the OUT is not connected to the DVR, please set the impedance switch to 75Ω. When the IN port of the converter is connected to the camera and the OUT port is connected to the DVR, please set to HI-Z. | [ Compact Size & Easy to Install ] The size of WANLUTECH CVI/TVI/AHD to HDMI converter is 109 mm x 94 mm x 25 mm,the weight of converter is 0.18 kg.It features a sturdy metal housing, with heat dissipation holes and mounting holes on both sides, easy to dissipate heat and install.