READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. | NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked. | WHAT YOU NEED: This 800 Series Long Range Stick adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system. | ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer. Supports OTA firmware updates and and all of the latest Z-Wave library commands.

READ BEFORE YOU BUY: The GPIO module is for advanced Home Assistant and home automation users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. | NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked. | WHAT YOU NEED: This 800 Series Long GPIO module adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up on a Raspberry Pi or Home Assistant Yellow hardware (sold separately). You'll need a home automation software of your choice (not included) to complete the system. | Z-WAVE SET-UP: Follow the detailed instructions from the QR in the manual to install your module and refer to the Home Assistant / Z-Wave JS documentation to set up your Z-Wave integration according to the recommended method. Supports OTA firmware updates and and all of the latest Z-Wave library commands.

FAST AND RELIABLE: Get notified on your Z-Wave hub's app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility). | EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces. | OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask Zooz about it). | Z-WAVE COMPATIBILITY: Works best with the Z-Box Hub. Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others. | SMART SECURITY: 800 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. If your hub supports ZWLR, you'll benefit from ultra reliable wireless communication and up to 1300 feet of range. Covered by a 5-year extended warranty once registered and backed by lifetime tech support 7 days a week.

BETTER Z-WAVE NETWORK: Add the range extender to boost signal in your Z-Wave network to help devices on the edge communicate faster with your hub. It repeats signal for all generations and versions of Z-Wave devices in the mesh. | POWER OUTAGE REPORTS: If your hub supports advanced functionality, it will display power outage reports from the extender if the receptacle it's plugged into loses power. It's equipped with built-in backup battery. | 800 SERIES CHIP: Get more range than ever with the latest generation Z-Wave chip. Build a more reliable smart home you can depend on. | EXTRA SECURITY: This device supports SmartStart and S2 Authenticated Security, the highest possible level of security in the Z-Wave protocol to help you keep your smart home private. | LIFETIME TECH SUPPORT: Get your questions answered by a Z-Wave expert 7 days a week. Register your product for an extended 5-year warranty. | HUB COMPATIBILITY: This device will start repeating the signal once added to any Z-Wave hub (regardless of how it displays) but only the open systems support it fully, including advanced setting access and power outage reports: Z-Box Hub, Home Assistant (Z-Wave JS), Hubitat, HomeSeer. It works with SmartThings with advanced settings when a custom edge driver is installed (get it from Zooz support).