Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 52mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 58mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 52mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 52mm ND filter, the lens cap/hood should be 55mm.

Creates a starburst effect from point light sources within an image, ideal for shooting night scenes, jewelry, wedding photography and more | Starburst effect features four, six or eight primary diffraction spikes which extend from the light source | Aluminum-alloy frame for durability while remaining lightweight | A rotation ring on the upper part of the frame is available to help you adjust the direction of the points of light 4, 6, or 8 when using (Most star filters sold from other vendors do not have such a rotation ring) | Compatible with any lens with 52mm diameter filter thread - This star filter is double threaded, has 52mm inner thread(male) and 52mm outer thread(female), this design allows you to put on any 52mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

【Reduce Highlight and Lower Contrast】This JJC black diffusion 1/2 filter helps to reducing highlight glare and lowering contrast, creating dreamy and cinematic effect. It also works great for wrinkles and blemishes, making the skin looks more smooth. Perfect for portrait photography, vlog and video recording. | 【AGC HD Optical Glass】Constructed from professional AGC HD optical glass, anti-glaring, ensuring less than 0.5% ultra-low reflectivity. | 【28 Layer Coatings】 With 28 layer coatings, effectively reduces reflection from both the ground and the filter itself. Water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant. | 【No Vignetting】The filter frame is made of aircraft-grade aluminum alloy with ultra-slim 0.2’’/5.5mm thickness. It is slim enough to prevent vignetting when using with wide-angle and telephoto lenses. | 【Compatibility】Compatible with any lens with 55mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø55, it means the filter thread size is 55mm, just need to select 55mm to fit your lens.

Diffusion Level: 1/4 density (the most popular one) | Diffuses light sources to create a soft glowing effect around highlights | Reduces overall contrast and increases halation (especially in the shadows) | Take the edge off modern digital cameras and creates a cinematic look and film feel in still images and video | Softens facial wrinkles and other blemishes | Provide little loss of detail across the image compared to traditional diffusion and soft focus filters | 28 layers multi coatings effectively reduces reflection, while making it water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant | Constructed from professional AGC HD optical glass and with ultra-slim 0.2"/5.5mm aircraft-grade aluminum alloy frame | Fits any lens with 55mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø55, it means the filter thread size is 55mm, just need to select a 55mm filter

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 55mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens, Sony FE 28-70mm f/3.5-5.6 OSS Lens, Sony E 18-135mm f/3.5-5.6 OSS Lens, Sony FE 50mm f/2.8 Macro Lens, Canon EF-M 11-22mm f/4-5.6 IS STM Lens and more lenses | This 55mm lens cap doesn’t fit Nikon AF-S 18-55mm lenses. NOT fits Canon EF-S 18-55mm lens

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 55mm diameter filter thread - This ND1000 filter is double threaded, has 55mm inner thread(male) and 55mm outer thread(female), this design allows you to put on any 55mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular JJC brand fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 55mm diameter filter thread - This variable ND filter is double threaded, has 55mm inner thread(male) and 58mm outer thread(female), this design allows you to put on any 58mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 55mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 58mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 55mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 55mm ND filter, the lens cap/hood should be 58mm.

Creates a starburst effect from point light sources within an image, ideal for shooting night scenes, jewelry, wedding photography and more | Starburst effect features four, six or eight primary diffraction spikes which extend from the light source | Aluminum-alloy frame for durability while remaining lightweight | A rotation ring on the upper part of the frame is available to help you adjust the direction of the points of light 4, 6, or 8 when using (Most star filters sold from other vendors do not have such a rotation ring) | Compatible with any lens with 55mm diameter filter thread - This star filter is double threaded, has 55mm inner thread(male) and 55mm outer thread(female), this design allows you to put on any 55mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

【Reduce Highlight and Lower Contrast】This JJC black diffusion 1/2 filter helps to reducing highlight glare and lowering contrast, creating dreamy and cinematic effect. It also works great for wrinkles and blemishes, making the skin looks more smooth. Perfect for portrait photography, vlog and video recording. | 【AGC HD Optical Glass】Constructed from professional AGC HD optical glass, anti-glaring, ensuring less than 0.5% ultra-low reflectivity. | 【28 Layer Coatings】 With 28 layer coatings, effectively reduces reflection from both the ground and the filter itself. Water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant. | 【No Vignetting】The filter frame is made of aircraft-grade aluminum alloy with ultra-slim 0.2’’/5.5mm thickness. It is slim enough to prevent vignetting when using with wide-angle and telephoto lenses. | 【Compatibility】Compatible with any lens with 58mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø58, it means the filter thread size is 58mm, just need to select 58mm to fit your lens.

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 58mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Canon EF-S 18-55mm f/3.5-5.6 IS II lens, Canon EF-S 18-55mm f/4-5.6 IS STM lens, Canon RF 24-50mm f/4.5-6.3 IS STM lens, Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED lens, Fujifilm XF 18-55mm f/2.8-4 R LM OIS lens, Panasonic Lumix G Vario 12-60mm f/3.5-5.6 ASPH. POWER O.I.S. lens | Replaces Canon E-58 II front lens cap or other 58mm front lens cap

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular JJC brand fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 58mm diameter filter thread - This variable ND filter is double threaded, has 58mm inner thread(male) and 62mm outer thread(female), this design allows you to put on any 62mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 58mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 62mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 58mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 58mm ND filter, the lens cap/hood should be 62mm.

Creates star effect to a point light source such as the sun, a light bulb, a candle or anything highly reflective | Features four, six or eight primary diffraction spikes which extend from the light source | The upper part of the frame is adjustable to change the direction of star effect when using | Made of premium aluminium alloy and optical glass

【DJI Osmo Pocket 3 Filter Set】:Specially designed for DJI Osmo Pocket 3, which includes CPL ND8 ND16 ND32 ND64 and ND256.!!!NOTES:Please remove the filter before turning off the camera, otherwise it might be stuck in the lens. | 【ND Filter】:The ND8 ND16 ND32 ND64 ND256 filters reduce light by 3, 4, 5,6 and 8 stops, offer precise exposure control during dynamic outdoor activities,while enhancing image details naturally, effectively prevent overexposure and elevate image quality across a range of sunlight conditions. | 【Polarizer Filter】It can polarize the light to eliminate unwanted reflections, enhances color saturation, and improve clarity and contrast.Such as water, glass or sky photography. | 【HD Optical Glass Filter】:The filter Made from HD optical glass, with no effect on the image quality, ensure image clarity, true color reproduction, and reduce post-processing work. | 【HD Optical Glass Filter & Multi-Layer Coating】:The filter is made of multi-layer coated HD optical glass, which ensures a clear image and true color reproduction, ensuring long lasting optical quality in challenging environments. | 【Magnetic Installation & Aluminum Frame】:With the magnetic design, the filter can be installed on the Osmo Pocket 3 lens very quickly and easily.And the aluminum alloy frame is lightweight and durable.

This JJC black diffusion 1/2 filter helps to reducing highlight glare and lowering contrast, creating dreamy and cinematic effect. It also works great for wrinkles and blemishes, making the skin looks more smooth. Perfect for portrait photography, vlog and video recording | Constructed from professional AGC HD optical glass, anti-glaring, ensuring less than 0.5% ultra-low reflectivity | With 28 layer coatings, effectively reduces reflection from both the ground and the filter itself. Water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant | The filter frame is made of aircraft-grade aluminum alloy with ultra-slim 0.2’’/5.5mm thickness. It is slim enough to prevent vignetting when using with wide-angle and telephoto lenses | Compatible with any lens with 62mm diameter filter thread

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 62mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel such as Nikon AF-S VR Micro-NIKKOR 105mm f/2.8G IF-ED Lens, Nikon AF-S Micro-NIKKOR 60mm f/2.8G ED Lens, Fujifilm XF 23mm f/1.4 R Lens, Fujifilm XF 56mm f/1.2 R Lens, Olympus M.Zuiko Digital ED 12-40mm f/2.8 PRO Lens, Sony E 10-18mm f/4 OSS Lens, Nikon NIKKOR Z 35mm f/1.8 S Lens, Nikon NIKKOR Z 50mm f/1.8 S Lens and more lenses | Replaces Canon E-62 II lens cap or 62mm lens cap from other brands

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 62mm diameter filter thread - This ND1000 filter is double threaded, has 62mm inner thread(male) and 62mm outer thread(female), this design allows you to put on any 62mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular JJC brand fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 62mm diameter filter thread - This variable ND filter is double threaded, has 62mm inner thread(male) and 67mm outer thread(female), this design allows you to put on any 67mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 62mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 67mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 62mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 62mm ND filter, the lens cap/hood should be 67mm.

Creates a starburst effect from point light sources within an image, ideal for shooting night scenes, jewelry, wedding photography and more | Starburst effect features four, six or eight primary diffraction spikes which extend from the light source | Aluminum-alloy frame for durability while remaining lightweight | A rotation ring on the upper part of the frame is available to help you adjust the direction of the points of light 4, 6, or 8 when using (Most star filters sold from other vendors do not have such a rotation ring) | Compatible with any lens with 62mm diameter filter thread - This star filter is double threaded, has 62mm inner thread(male) and 62mm outer thread(female), this design allows you to put on any 62mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Diffusion Level: 1/4 density (the most popular one) | Diffuses light sources to create a soft glowing effect around highlights | Reduces overall contrast and increases halation (especially in the shadows) | Take the edge off modern digital cameras and creates a cinematic look and film feel in still images and video | Softens facial wrinkles and other blemishes | Provide little loss of detail across the image compared to traditional diffusion and soft focus filters | 28 layers multi coatings effectively reduces reflection, while making it water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant | Constructed from professional AGC HD optical glass and with ultra-slim 0.2"/5.5mm aircraft-grade aluminum alloy frame | Fits any lens with 67mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø67, it means the filter thread size is 67mm, just need to select a 67mm filter

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 67mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Canon EF 70-200mm f/4 L IS USM lens, Canon EF 70-300mm f/4-5.6 IS II USM Lens, Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens, Canon EF-S 18-135mm f/3.5-5.6 IS USM Lens, Fujifilm XF 16mm f/1.4 R WR Lens, Sony FE 24-70mm f/4 ZA OSS Lens, Sony FE 85mm f/1.8 Lens, Nikon AF-S NIKKOR 85mm f/1.8G Lens and more lenses | Replaces Canon E-67 II lens cap or 67mm lens cap from other brands

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 67mm diameter filter thread - This ND1000 filter is double threaded, has 67mm inner thread(male) and 67mm outer thread(female), this design allows you to put on any 67mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 67mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 77mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 67mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 67mm ND filter, the lens cap/hood should be 72mm.

The rain covers slip over the tripod's leg to safeguard against debris, sand, mud, snow and water while shooting in the elements or inclement weather. | 3-PCS is for large tripod legs with a diameter up to 2.75” and 47.20” in length. | 3-PCS is for smaller tripod legs with a diameter up to 2.75” and 23.50” in length. | Lock the rain sleeves securely on the tripod legs by pulling on the drawstring and cinching with the barrel. | The bottom of the sleeves are reinforced for durability, don’t worry the sleeve will tear apart when you stick the legs in mud, sand, snow or on rocky terrain.

【DJI Osmo Pocket 3 Filter Kit】This filter kit is specially designed for DJI Osmo Pocket 3 Creator Combo | 【HD Optical Glass & Aluminum Frame】Each filter is made from high-definition optical glass, ensures image clarity and true color reproduction, no effect on the image quality. The ultra-thin aluminum alloy frame is lightweight and durable | 【ND Filter & CPL Filter】The ND8 ND16 ND32 ND64 ND256 filters reduce light by 3, 4, 5,6 and 8 stops respectively, reduce the amount of light entering the lens, ideal for long-exposure photography, video recording and shallow depth-of-field effects in bright environments. CPL filter helps minimize glare and reflection from water, snow, glass, window and other non-metallic surfaces | 【Multi-Resistant Coating】With multiple coatings on both sides, makes the filter water-resistant, anti-oil and anti-static. The filter also protects the lens from dust, moisture, scratch and impact | 【Magnetic Design】Magnetic design ensures a quick installation and removal, saves time for instant shooting. The filter fits snugly onto the camera lens and will not block the lens or interfere with the operation of gimbal | 【Package】The package includes: ND8 filter x 1, ND16 filter x 1, ND32 filter x 1, ND64 filter x 1, ND256 filter x 1, CPL filter x 1, microfiber cleaning cloth x 1

【Reduce Highlight and Lower Contrast】This JJC black diffusion 1/2 filter helps to reducing highlight glare and lowering contrast, creating dreamy and cinematic effect. It also works great for wrinkles and blemishes, making the skin looks more smooth. Perfect for portrait photography, vlog and video recording. | 【AGC HD Optical Glass】Constructed from professional AGC HD optical glass, anti-glaring, ensuring less than 0.5% ultra-low reflectivity. | 【28 Layer Coatings】 With 28 layer coatings, effectively reduces reflection from both the ground and the filter itself. Water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant. | 【No Vignetting】The filter frame is made of aircraft-grade aluminum alloy with ultra-slim 0.2’’/5.5mm thickness. It is slim enough to prevent vignetting when using with wide-angle and telephoto lenses. | 【Compatibility】Compatible with any lens with 72mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø72, it means the filter thread size is 72mm, just need to select 72mm to fit your lens.

Diffusion Level: 1/4 density (the most popular one) | Diffuses light sources to create a soft glowing effect around highlights | Reduces overall contrast and increases halation (especially in the shadows) | Take the edge off modern digital cameras and creates a cinematic look and film feel in still images and video | Softens facial wrinkles and other blemishes | Provide little loss of detail across the image compared to traditional diffusion and soft focus filters | 28 layers multi coatings effectively reduces reflection, while making it water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant | Constructed from professional AGC HD optical glass and with ultra-slim 0.2"/5.5mm aircraft-grade aluminum alloy frame | Fits any lens with 72mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø72, it means the filter thread size is 72mm, just need to select a 72mm filter

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 72mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel such as Nikon Nikkor Z 24-70mm f/4 S Lens, Nikon AF-S Nikkor 18-200mm f/3.5-5.6G ED VR II Lens, Canon EF 70-200mm f/4L IS II USM Lens, Canon EF 85mm f/1.4L IS USM Lens, Canon RF 24-240mm f/4-6.3 IS USM Lens, Sony E PZ 18-105mm f/4 G OSS Lens, Sony FE 70-200mm f/4 G OSS Lens, Fujifilm XF 16-80mm f/4 R OIS WR Lens and more lenses | Replaces Canon E-72 II lens cap or 72mm lens cap from other brands

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular JJC brand fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 72mm diameter filter thread - This variable ND filter is double threaded, has 72mm inner thread(male) and 77mm outer thread(female), this design allows you to put on any 77mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 72mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 77mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 72mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 72mm ND filter, the lens cap/hood should be 77mm.

Creates a starburst effect from point light sources within an image, ideal for shooting night scenes, jewelry, wedding photography and more | Starburst effect features four, six or eight primary diffraction spikes which extend from the light source | Aluminum-alloy frame for durability while remaining lightweight | A rotation ring on the upper part of the frame is available to help you adjust the direction of the points of light 4, 6, or 8 when using (Most star filters sold from other vendors do not have such a rotation ring) | Compatible with any lens with 72mm diameter filter thread - This star filter is double threaded, has 72mm inner thread(male) and 72mm outer thread(female), this design allows you to put on any 72mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Diffusion Level: 1/4 density (the most popular one) | Diffuses light sources to create a soft glowing effect around highlights | Reduces overall contrast and increases halation (especially in the shadows) | Take the edge off modern digital cameras and creates a cinematic look and film feel in still images and video | Softens facial wrinkles and other blemishes | Provide little loss of detail across the image compared to traditional diffusion and soft focus filters | 28 layers multi coatings effectively reduces reflection, while making it water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant | Constructed from professional AGC HD optical glass and with ultra-slim 0.2"/5.5mm aircraft-grade aluminum alloy frame | Fits any lens with 77mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø77, it means the filter thread size is 77mm, just need to select a 77mm filter