Body cap protects the camera's sensor from dust and damage when a lens is not mounted | Rear lens cap protects the rear glass element and electronic contacts from scratches, dust, water, and fingerprints | Body cap fits Canon RF mount mirrorless camera such as: Canon EOS R, RP, R3, R5, R5C, R6, R6 Mark II, R7, R8, R10, R50, R100 | Rear lens cap fits Canon RF mount lenses such as: RF 24-50mm f/4.5-6.3 IS STM Lens, RF 24-105mm f/4 L IS USM Lens, RF 24-105mm F4-7.1 IS STM Lens, RF-S 18-45mm f/4.5-6.3 IS STM Lens, RF-S 18-150mm f/3.5-6.3 IS STM Lens, RF-S 55-210mm f/5-7.1 IS STM Lens, etc. | Made of high quality ABS plastic and fits the camera and lens perfectly

Patented Quick Release Buckle: Quickly and securely attach your camera to your strap with the patented quick release buckles. Easy to remove and get the strap out of the way when the camera is on a tripod | Universal Buckle Loop: The loop is strong enough to support most DSLR and mirrorless cameras, such as Canon EOS R100, R50, R6 Mark II, R5, 90D, 80D, Rebel T8i, T7, T7i, Nikon Z30, Z50, Z5, Z6 II, Z7 II, Sony A7C II, A7 IV, A7 III, A7R V, A7R IV, A7S III, Fujifilm X-T5, X-T4, X-T30 II, X100V and more. Note: this loop is compatible with camera strap eyelet openings bigger than 2 x 4mm. Please use with a triangle or round ring if necessary | Wide Compatibility: This connectors support most third-party camera strap or wrist strap with the width less than 0.43”/11mm, it provides a more convenient way for attaching and detaching your strap | Replace Warning: The loop is made of high-wear-resistant Dyneema rope. Three-layer structure enables you to change the strap in time, thus ensures your gear safety | Durable and Scratch Proof: The quick-release buckle's connecting structure is crafted from durable aluminum while the main body is made of ABS to prevent any scratches on the camera, ensuring safety and reliability | What You Get: Quick Release Buckle x2

Body cap protects the camera's sensor from dust and damage when a lens is not mounted | Rear lens cap protects the rear glass element and electronic contacts from scratches, dust, water, and fingerprints | Body cap fits Nikon Z mount mirrorless camera such as: Nikon Z5, Z6, Z6 II, Z6 III, Z7, Z7 II, Z8, Z9, Z30, Z50, Z50 II, Zf, Zfc | Rear lens cap fits Nikon Z mount lenses such as: Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens, Nikon NIKKOR Z DX 50-250mm f/4.5-6.3 VR Lens, Nikon NIKKOR Z 24-120mm f/4 S Lens, Nikon NIKKOR Z 24-50mm f/4-6.3 Lens, NIKKOR Z 24-200mm f/4-6.3 VR Lens | Made of high quality ABS plastic and fits the camera and lens perfectly | Package contains: Z mount body cap x 2, Z mount rear lens cap x 2

Package includes 2 pieces, in case of accidental loss. | The flash shoe cap is compatible with Canon Speedlight 270EX II, 580EX II and 430EX III-RT. | Protects the flash shoe mount and contacts from dust, moisture and accidental impact. | Made of durable ABS material, the flash shoe cover slides into the Speedlight’s hot shoe easily but securely. | In addition, the hot shoe cover features self-locking for better protection. But please pay attention that it is not compatible with flash hot shoe edge looped by silicone ring.

Package includes 2 pieces, in case of accidental loss. | The flash shoe cap is compatible with Nikon Speedlight SB-600, SB-500, SB-400 and SB-300. | Protects the shoe mount and contacts from dust, moisture and accidental impact. | Made of durable ABS material, the flash shoe cover slides into the Speedlight’s hot shoe easily but securely. | In addition, the hot shoe cover features self-locking for better protection. But please pay attention that it is not compatible with flash hot shoe edge looped by silicone ring.

【35mm 120 Film Squeegee】:The film squeegee is specially designed for 35mm/135 120 negative film.It can effectively remove excess water from a newly processed film before drying and improve the efficiency. | 【Soft Silicone Blades】:Soft replaceable silicone strips leaves no scratches or wear on your film.Comes with a pair of spare silicone strips, convenient for you to use again. | 【Comfortable Grip】:The film wiper features ergonomic shape ensures a comfortable and fatigue-free grip, provides a more relaxed experience for you. | 【Premium ABS Shell】:Made of ABS material, water-resistant, rust-proof, and free of impurity residue. | 【Warm Tips】1.Pls check your film and the film squeegee are perfectly clean before use.2.Make sure that the silicone blades are sufficiently moist.3. Pls keep softly to use this product, do not clamp on the squeegee forcefully.

【For 35mm Film】The film retriever is used to retrieve 35mm film leaders that have been rewound back into film cassettes. | 【Durable Material】The roll picker is made of ABS & PET material, durable and deformation-resistant. With three plastic blades design and the blades are smooth and polished to protect the film from scratches. | 【Flexibility】It has a retractable design that prevents scratching film and can be used in daylight conditions without risk of exposing film. | 【User Friendly】It’s an easy film tool to extract the film effectively with its simple design. | 【Warm Tips】Please read the instructions carefully before use!

【Practicability】: Film leader retriever is designed for 35mm film, with three plastic blades designed to quickly pull out the film head, saving time and effort. | 【Safety & Durable】: Film Picker is made of high quality plastic material, durable and deformation-resistant, the blades is smooth and clean, effectively avoid scratching the negative film. | 【User-friendly】: Simple structure, easy to operate, will not affect the normal use of film. | 【Flexibility】: Retractable design prevents scratching the film, you can use it to draw the film head out in the sunlight without having to use it in the darkroom. | 【Portable】: small and portable, no burden to go out, and comes with an anti-lost Lanyard. | 【Warm Tips】：1.Due to the film head in the film spool position deviation, or unskilled operation, may lead to failure to remove, we recommend that you try a few more times.2.When turning the film spool, please listen carefully with your ear close to the spool, once you hear a relatively clear "CLICK" sound, you should stop turning immediately.3.Please read the instructions carefully before use!

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 37mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Olympus 14-42mm II Lens,Olympus M.Zuiko Digital ED 45mm f1.8 Lens,Panasonic Lumix G Vario 12-32mm f3.5-5.6 ASPH. Lens,Panasonic Lumix G X Vario PZ 14-42mm f3.5-5.6 ASPH Power O.I.S. Lens | Replaces Olympus LC-37B front lens cap or 37mm lens cap from other brands

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Canon (replaces RS-60E3), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Nikon (replaces MC-30), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Nikon (replaces MC-DC2), studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

Package Includes: Wireless Camera Flash Trigger & Remote Control Kit (1 Transmitter, 2 Receivers), shutter cable for Sony multi connector, studio light cable x2pcs, 3.5mm-6.3mm adapter x2pcs, 23A battery x1pc, AAA battery x4pcs. | 16 Channels, operation range up to 100 feet (30m), max sync speed of 1/250s, 433MHz frequency. | Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger. | The wireless flash trigger is compatible with all flashes with STANDARD HOT SHOE, such as Canon 580EX II, 580EX, 540EZ, 520EZ, 430EX II, 430EX, 430EZ, 420EX ,420EZ, 380EX, Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24, SB-700, etc | Since the flash trigger kit does not transmit TTL settings, use of a flash or light unit with full manual control is recommended.

1/4"-20 female thread on the bottom, action camera clamp on the top | Allows you attach the action camera on tripod, selfie stick, monopod or other devices with standard 1/4"-20 screw | Compatible with Gopro hero 13, hero 12, hero 11, hero 10, hero 9, hero 8, hero 7, hero 6, hero 5, hero 4, hero 3, hero 3+, hero session, Gopro max, Gopro fusion, Dji osmo action 4, action 43, insta360 Ace, Ace Pro, Akaso and more action cameras | Latest stylish look, made of premium ABS material, sturdy and durable | Compact design, convenient to carry out for outdoor shooting

【4 Pack】:4 x Screen Film,compatible with your RS 4/RS 4 Pro/RS 3/RS 3 Pro camera. | 【Clear Visual】:Ultra-thin 0.3mm optical glass with 95% high light transmission and ultra-low reflection allowing you to capture great shots to your heart's content! | 【Effective Protection】:Glass material and multi-layer coating effectively block UV rays and reducing reflections,have a strong impact resistance,great reducing dust,oil and fingerprint smudges. | 【Precise Fit】:This screen protector is customized for RS 4/RS 4 Pro/RS 3/RS 3 Pro, cover the entire screen, keep the sensitivity of the touchscreen and does not affect the original visual quality of the cameraa. | 【Easy to Install】:The protective film uses electrostatic adsorption method, easy to install and not easy to produce air bubbles, easy to remove and leave no residue.2.5D safety curved edge design, to avoid scratching your fingers.

【DJI Osmo Pocket 3 Filter Set】:Specially designed for DJI Osmo Pocket 3, which includes CPL, NDV2-32, NDV64-1000 and 1/4 Black Mist Filter.!!!NOTES:Please remove the filter before turning off the camera, otherwise it might be stuck in the lens. | 【NDV2-32 and NDV64-1000 Filter】:NDV2-32(1-5 Stops) and NDV64-1000(6-10 Stops) Filter are adjustable by rotating, allows flexible light reduction, perfect for scenes where exposure needs to be quickly adjusted in changing lighting conditions, offering more creativity and freedom. | 【1/4 Black Diffusion Filter】:1/4 Black Mist Filter Softens highlights and lowers contrast, creating a dreamy, cinematic effect in portraits, videography, and night photography, adding a unique film-like quality to your images. | 【Polarizing Filter】:It can polarize the light to eliminate unwanted reflections, enhances color saturation, and improve clarity and contrast.Such as water, glass or sky photography. | 【HD Optical Glass Filter & Multi-Layer Coating】:The filter is made of multi-layer coated HD optical glass, which ensures a clear image and true color reproduction, ensuring long lasting optical quality in challenging environments. | 【Magnetic Installation & Aluminum Frame】:With the magnetic design, the filter can be installed on the Osmo Pocket 3 lens very quickly and easily.And the aluminum alloy frame is lightweight and durable.

Includes an 18% gray card, a white card and a black card, made of durable PVC material | Size of each card: 4" (Height) x 5.2" (Width) | For Perfect Color Balance, a MUST accessory for photographer | Use with any digital camera | Free detachable lanyard to keep the cards handy at all times

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 40.5mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Sony SELP1650 16-50mm f3.5-5.6 OSS lens, Sony FE 28-60mm f4-5.6 lens and Sony ZV-1F point and shoot camera | Replaces Sony ALC-F405S Front Lens Cap for SELP1650 lens or 40.5mm lens cap from other brands

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 40.5mm diameter filter thread - This ND1000 filter is double threaded, has 40.5mm inner thread(male) and 40.5mm outer thread(female), this design allows you to put on any 40.5mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular JJC brand fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 40.5mm diameter filter thread - This variable ND filter is double threaded, has 40.5mm inner thread(male) and 43mm outer thread(female), this design allows you to put on any 43mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 43mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Fujifilm XF 35mm f2 R WR lens,Fujifilm XF 23mm f2 R WR Lens,Canon EF-M 32mm f1.4 STM Lens,Canon RF 50mm f1.8 STM, EF-M 28mm f3.5 IS STM Lens,Canon EF-M 22mm f2 STM Lens | Replaces Fujifilm 43mm lens cap or 43mm lens cap from other brands

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 43mm diameter filter thread - This variable ND filter is double threaded, has 43mm inner thread(male) and 46mm outer thread(female), this design allows you to put on any 46mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 46mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such as Nikon Nikkor Z DX 16-50mm f/3.5-6.3 VR Lens,Olympus M.Zuiko Digital 25mm f/1.8 Lens,Olympus M.Zuiko Digital ED 12mm f/2.0 Lens,Olympus M.Zuiko Digital ED 60mm f/2.8 Macro Lens,Panasonic Lumix G 25mm f/1.7 Lens,Panasonic Lumix G Vario 14-42mm f/3.5-5.6 II lens,Fujifilm XF 50mm f/2 R WR Lens and more lenses | Replaces Olympus LC-46 lens cap or 46mm lens cap from other brands

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 46mm diameter filter thread - This variable ND filter is double threaded, has 46mm inner thread(male) and 49mm outer thread(female), this design allows you to put on any 49mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

【Reduce Highlight and Lower Contrast】This JJC black diffusion 1/2 filter helps to reducing highlight glare and lowering contrast, creating dreamy and cinematic effect. It also works great for wrinkles and blemishes, making the skin looks more smooth. Perfect for portrait photography, vlog and video recording. | 【AGC HD Optical Glass】Constructed from professional AGC HD optical glass, anti-glaring, ensuring less than 0.5% ultra-low reflectivity. | 【28 Layer Coatings】 With 28 layer coatings, effectively reduces reflection from both the ground and the filter itself. Water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant. | 【No Vignetting】The filter frame is made of aircraft-grade aluminum alloy with ultra-slim 0.2’’/5.5mm thickness. It is slim enough to prevent vignetting when using with wide-angle and telephoto lenses. | 【Compatibility】Compatible with any lens with 49mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø49, it means the filter thread size is 49mm, just need to select 49mm to fit your lens.

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 49mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such as Canon EF-M 15-45mm f/3.5-6.3 IS STM Lens, Canon EF 50mm f/1.8 STM Lens, Sony E 35mm f/1.8 OSS Lens, Sony E 50mm f/1.8 OSS Lens, Sony E 55-210mm f/4.5-6.3 OSS Lens | Replaces Canon E-49 II lens cap or 49mm lens cap from other brand

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 49mm diameter filter thread - This ND1000 filter is double threaded, has 49mm inner thread(male) and 49mm outer thread(female), this design allows you to put on any 49mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 49mm diameter filter thread - This variable ND filter is double threaded, has 49mm inner thread(male) and 52mm outer thread(female), this design allows you to put on any 52mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Made of black anodized aluminum, non-glare matte finish on the inside | Protects your lens from Bumps and Impacts | Fits Lenses with 49mm filter threads, just simply screw the hood into your lens filter thread | Hood's front opening accepts mounting 58mm filters or caps | The height of hood is 24mm, works with lenses at a focal length of 50mm and longer on full frame camera or 28mm and longer on APS-C camera

【Usage】The Variable ND filter allows you to shoot wide-aperture lenses in bright light without overexposing and shallow depth of field while under lighting conditions that exceed the shutter speed capabilities of the camera. A good partner for you to record movement in subjects such as waterfalls, vehicular traffic, seascapes, streams and clouds. | 【ND 2 - ND 400】2X to 400X filter factor provides an exposure reduction of 1- 9 stops. You only need to carry one ND filter with you to get a variety of darkness levels. | 【X Cross】Due to the design of the filters, as you approach the maximum ND setting, you can get a cross pattern across the image. This is remedied by dialing the ND setting back a bit. | 【Multi Nano Coating】16-Layer Nano Coating makes the filter anti-scratch, anti-fingerprints, anti-static, oil and water-resistant. The filter is constructed from high quality Japanese glass for increased optical clarity and color fidelity. Slim design with 0.28” aluminum frame helps minimize the potential for vignetting. | 【How to choose the right thread?】Compatible across all lenses with 49mm lens thread. Please verify your camera's lens thread size based on “Ø” marking on lens barrel or underneath lens cap before purchasing. For this 49mm ND filter, the lens cap/hood should be 52mm.

Creates a starburst effect from point light sources within an image, ideal for shooting night scenes, jewelry, wedding photography and more | Starburst effect features four, six or eight primary diffraction spikes which extend from the light source | Aluminum-alloy frame for durability while remaining lightweight | A rotation ring on the upper part of the frame is available to help you adjust the direction of the points of light 4, 6, or 8 when using (Most star filters sold from other vendors do not have such a rotation ring) | Compatible with any lens with 49mm diameter filter thread - This star filter is double threaded, has 49mm inner thread(male) and 49mm outer thread(female), this design allows you to put on any 49mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

【DJI Osmo Pocket 3 Filter Kit】This filter kit is specially designed for DJI Osmo Pocket 3 Creator Combo | 【HD Optical Glass & Aluminum Frame】Each filter is made from high-definition optical glass, ensures image clarity and true color reproduction, no effect on the image quality. The ultra-thin aluminum alloy frame is lightweight and durable | 【Variable ND Filter & CPL Filter & 1/4 Black Diffusion Filter】The variable ND2-32 filter reduces light 1-5 stops, ND64-1000 filter reduces light 6-10 stops. Helps to reduce the amount of light entering the lens, ideal for long-exposure photography, video recording and shallow depth-of-field effects in bright environments. CPL filter helps minimize glare and reflection from water, snow, glass, window and other non-metallic surfaces. 1/4 black diffusion filter softens highlights and lowers contrast, creates a dreamy, cinematic effect in portraits, videography, and night photography, adds a unique film-like quality to your images | 【Multi-Resistant Coating】With multiple coatings on both sides, makes the filter water-resistant, anti-oil and anti-static. The filter also protects the lens from dust, moisture, scratch and impact | 【Magnetic Design】Magnetic design ensures a quick installation and removal, saves time for instant shooting. The filter fits snugly onto the camera lens and will not block the lens or interfere with the operation of gimbal | 【Package】The package includes: ND2-32 filter x 1, ND64-1000 filter x 1, CPL filter x 1, 1/4 black diffusion filter x 1, microfiber cleaning cloth x 1

【DJI Osmo Pocket 3 Filter Kit】This filter kit is specially designed for DJI Osmo Pocket 3 Creator Combo | 【HD Optical Glass & Aluminum Frame】Each filter is made from high-definition optical glass, ensures image clarity and true color reproduction, no effect on the image quality. The ultra-thin aluminum alloy frame is lightweight and durable | 【ND Filter & 1/4 Black Diffusion Filter】The ND16 ND64 ND256 filters reduce light by 4, 6 and 8 stops respectively, reduce the amount of light entering the lens, ideal for long-exposure photography, video recording and shallow depth-of-field effects in bright environments. 1/4 black diffusion filter softens highlights and lowers contrast, creates a dreamy, cinematic effect in portraits, videography, and night photography, adds a unique film-like quality to your images | 【Multi-Resistant Coating】With multiple coatings on both sides, makes the filter water-resistant, anti-oil and anti-static. The filter also protects the lens from dust, moisture, scratch and impact | 【Magnetic Design】Magnetic design ensures a quick installation and removal, saves time for instant shooting. The filter fits snugly onto the camera lens and will not block the lens or interfere with the operation of gimbal | 【Package】The package includes: ND16 filter x 1, ND64 filter x 1, ND256 filter x 1, 1/4 black diffusion filter x 1, moist cleaning wipe x 1

【DJI Osmo Pocket 3 Filter Kit】This filter kit is specially designed for DJI Osmo Pocket 3 Creator Combo | 【HD Optical Glass & Aluminum Frame】Each filter is made from high-definition optical glass, ensures image clarity and true color reproduction, no effect on the image quality. The ultra-thin aluminum alloy frame is lightweight and durable | 【ND Filter & CPL Filter】The ND16 ND64 ND256 filters reduce light by 4, 6 and 8 stops respectively, reduce the amount of light entering the lens, ideal for long-exposure photography, video recording and shallow depth-of-field effects in bright environments. CPL filter helps minimize glare and reflection from water, snow, glass, window and other non-metallic surfaces | 【Multi-Resistant Coating】With multiple coatings on both sides, makes the filter water-resistant, anti-oil and anti-static. The filter also protects the lens from dust, moisture, scratch and impact | 【Magnetic Design】Magnetic design ensures a quick installation and removal, saves time for instant shooting. The filter fits snugly onto the camera lens and will not block the lens or interfere with the operation of gimbal | 【Package】The package includes: ND16 filter x 1, ND64 filter x 1, ND256 filter x 1, CPL filter x 1, microfiber cleaning cloth x 1

【Capacity】The lens filter pouch provides a secure and convenient storage solution for four circular filters up to 58mm. *Note: The filters are not included. | 【Durable】The exterior of the lens filter case is made of high quality polyester material for durability as well as dustproof. Great to store and protect your filters. | 【Protection】Filters are placed within one of four padded elastic pockets for better protection. Foldable design and handy size 6.7x3.5x1.0” allows you to throw it into your camera bag. | 【Hook-and-loop closure】It can be easily accessed by opening its hook and loop closure. | 【What you get】Filter Pouch x1, Microfiber Cleaning Cloth x 1

【Reduce Highlight and Lower Contrast】This JJC black diffusion 1/2 filter helps to reducing highlight glare and lowering contrast, creating dreamy and cinematic effect. It also works great for wrinkles and blemishes, making the skin looks more smooth. Perfect for portrait photography, vlog and video recording. | 【AGC HD Optical Glass】Constructed from professional AGC HD optical glass, anti-glaring, ensuring less than 0.5% ultra-low reflectivity. | 【28 Layer Coatings】 With 28 layer coatings, effectively reduces reflection from both the ground and the filter itself. Water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant. | 【No Vignetting】The filter frame is made of aircraft-grade aluminum alloy with ultra-slim 0.2’’/5.5mm thickness. It is slim enough to prevent vignetting when using with wide-angle and telephoto lenses. | 【Compatibility】Compatible with any lens with 52mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø52, it means the filter thread size is 52mm, just need to select 52mm to fit your lens.

Diffusion Level: 1/4 density (the most popular one) | Diffuses light sources to create a soft glowing effect around highlights | Reduces overall contrast and increases halation (especially in the shadows) | Take the edge off modern digital cameras and creates a cinematic look and film feel in still images and video | Softens facial wrinkles and other blemishes | Provide little loss of detail across the image compared to traditional diffusion and soft focus filters | 28 layers multi coatings effectively reduces reflection, while making it water-resistant, anti-scratch, anti-fingerprint, anti-static and oil resistant | Constructed from professional AGC HD optical glass and with ultra-slim 0.2"/5.5mm aircraft-grade aluminum alloy frame | Fits any lens with 52mm diameter filter thread. Please find the diameter symbol "ø" on the front or side of your lens, or printed underneath the front lens cap, such as ø52, it means the filter thread size is 52mm, just need to select a 52mm filter

Inlcudes 1 premium plastic center pinch lens cap + 1 universal elastic lens cap keeper | The lens cap protects your lens from scratches, fingerprints and the elements when the lens is not in use. While the lens cap keeper prevents loss of your lens cap | Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole | Compatible with any lenses with 52mm lens thread size, Please note your camera's lens thread size will be marked somewhere on the lens barrel, such like Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G lens, Nikon AF-S DX Nikkor 35mm f/1.8G Lens, Nikon Nikkor Z 24-50mm f/4-6.3 lens, Canon EF-M 55-200mm f/4.5-6.3 IS STM lens, Canon EF-M 18-55mm f/3.5-5.6 IS STM lens, Fujifilm XC 15-45mm f/3.5-5.6 OIS PZ lens, Panasonic Lumix G Vario 14-45mm f/3.5-5.6 lens and more lenses | Replaces Nikon LC-52 lens cap or 52mm lens cap from other brands

1000x filter factor, providing a 10-stop exposure reduction which allows you to control depth of field and convey movement more easily | Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | It does not affect coloration of the image and is ideal for pairing with other filters, unlike a variable ND filter which could cause "X" cross mark, vignetting, reflections or blur in the picture when using wide angle lenses at higher ND values, this ND1000 fixed 10-stop neutral density 3.0 filter does not have this kind of issue. | The filter is constructed from Japanese famous brand optical glass that features 8 layers of anti-reflection coatings on each side(total 16 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 52mm diameter filter thread - This ND1000 filter is double threaded, has 52mm inner thread(male) and 52mm outer thread(female), this design allows you to put on any 52mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Darkens entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required, suitable to record movement/image blur in subjects such as waterfalls, streams, waves, clouds or any fast moving subject | Eliminates buying many fixed ND Filters as it is designed with a built-in rotating ring that controls neutral density ranging from ND2 to ND2000 (1 to 11 f-stop). The heavier the density, the slower your shutter speed will be | When using this variable ND filter at high ND values (9 f-stop or above) on wide angle lenses, it would appear "X" cross mark, vignetting, reflections or blur in the picture, this is unavoidable according to the structure and operating principle of a variable ND filter. If this is not acceptable to you, please go for a non variable ND filter, for example, a popular JJC brand fixed ND1000 10 f-stop ND filter | The filter is constructed from German famous brand optical glass that features 9 layers of anti-reflection coatings on each side(total 18 layers), making the filter anti-scratch, anti-static, oil and water-resistant | Compatible with any lens with 52mm diameter filter thread - This variable ND filter is double threaded, has 52mm inner thread(male) and 55mm outer thread(female), this design allows you to put on any 55mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter