Compatibility: The lens decoration ring is designed for Ricoh GR III | Replacement: Replace Ricoh GN-1 ring cap | Protection & Decoration: To protect the lens barrel exterior. And decorate your GR III camera, making it more colorful and unique | Premium Materials: Made of aluminum alloy, durable & lightweight | 5 colors available: Black, Blue, Gold, Green or Red

Compatibility: The lens decoration ring is designed for Ricoh GR III | Replacement: Replace Ricoh GN-1 ring cap | Protection & Decoration: To protect the lens barrel exterior. And decorate your GR III camera, making it more colorful and unique | Premium Materials: Made of aluminum alloy, durable & lightweight | 5 colors available: Black, Blue, Gold, Green or Red

Protect the lens filters from dust, scratches and fingerprints while not in use | Simply screw one or more filters together then screw the stack caps on the top and bottom | Enable a more organized, streamlined system for storing and carrying your filters | Made of aluminium alloy, slim and durable | Fits for any filter with 58mm inner thread(male) and 58mm outer thread(female) - Normally the inner thread and the outer thread of a lens filter are the same size, but for the Variable ND filters, they are normally not the same, the outer thread of a Varibale ND filter is normally larger than its inner thread, so this stack cap will not work for variable ND filters

Made of high quality aluminium material | Minimizes flare and ghosting by blocking out stray light | Protects your lens from accidental impact and the elements | Comes with a 49mm center pinch snap-on lens cap, protect lens away from dust and scratch | Replaces Leica round lens hood Q, fits with Leica Q3 43, Q3, Q2 and Q cameras

Made of high quality aluminium material | Minimizes flare and ghosting by blocking out stray light | Protects your lens from accidental impact and the elements | Comes with a 49mm center pinch snap-on lens cap, protect lens away from dust and scratch | Replaces Leica round lens hood Q, fits with Leica Q3 43, Q3, Q2 and Q cameras

Compatible with Fujifilm X100V, X100F, X100T, X100S, X100, X70 camera | 2in1: Lens hood & Lens / Filter adapter ring, both are made of anodized aluminum | The Lens hood provides additional protection to the camera and lens, designed to minimize lens flare by deflecting stray light from entering lens | The adapter ring facilitates the attachment of the lens hood or a 49mm thread filter for UV, CPL filters etc. | Reminder: please remove the front ring on X100V, X100F, X100T, X100S, X100, X70 before installing adapter ring.

Compatible with Fujifilm X100V, X100F, X100T, X100S, X100, X70 camera | 2in1: Lens hood & Lens / Filter adapter ring, both are made of anodized aluminum | The Lens hood provides additional protection to the camera and lens, designed to minimize lens flare by deflecting stray light from entering lens | The adapter ring facilitates the attachment of the lens hood or a 49mm thread filter for UV, CPL filters etc. | Reminder: please remove the front ring on X100V, X100F, X100T, X100S, X100, X70 before installing adapter ring.

The screw-in lens hood is designed for Nikon NIKKOR Z 40mm f/2 Lens and NIKKOR Z 28mm f/2.8 Lens on Nikon Z30 Z50 Z fc Z6 Z7. | Ф52mm filter and Ф52mm lens cap are allowed to attach. | Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on. | Made of high quality aluminium alloy, sturdy and durable. | Protects your lens from accidental impact and the elements.

Made of high quality aluminium, bayonet design | Minimizes flare and ghosting by blocking out stray light | Comes with a lens hood cap, protects your lens from accidental impact and the elements | Not affect the use of 72mm filter | Fits Fujifilm XF 16-80mm f/4 R OIS WR lens

Compatibility: The dedicated square hood is designed for Fujifilm XF 18mm f/1.4 R LM WR Lens on Fujifilm X mount cameras. Note* It’s not compatible with the Fujifilm XF 18mm f/2 R Lens. | Replacement: Replaces Fujifilm LH-XF18 lens hood. | Flexibility: Ф62mm filter and Ф62mm lens cap are available to attach. | Professional Design: Non-glare matte finish on the inside to further prevent or limit lens flare. No vignetting with the hood on. | Protection: Protects your lens from accidental impact and the elements. It also comes with a hood cap for better protection.

Compatibility: The Square lens hood is designed for Fujinon XF 23mm F1.4 R LM WR and XF 33mm F1.4 R LM WR Lens, replaces Fujifilm LH-XF23 II/LH-XF23-2 Lens Hood. | The interior non-glare matte finish further prevents or limits lens flare. No vignetting will show with the hood on. | Made of premium aluminum alloy, the lens hood features a natural matching appearance with your camera, maintaining the aesthetic of the lens and camera system. The bayonet is made of synthetic resin, which will not damage your lenses. | With the extended lens end, you will also benefit from extra protection from accidental impact. It is equipped with a cap for better protection of your lens and easy to intall. | Note: This lens hood doesn't fit Fujifilm XF 23mm F1.4 R or Fujifilm XF 23mm F2 R WR lens.

Compatible with Fujifilm XF 16-55mm f/2.8 R LM WR lens | The main body is made of high quality aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Not affect the use of 77mm filter with this lens hood

Compatible with Fujifilm XF 16-50mm f/2.8-4.8 R LM WR lens | Made of premium aluminium, bayonet design | Minimizes flare and ghosting by blocking out stray light | Comes with a lens hood cap, protects your lens from accidental impact and the elements | Not affect to use a 58mm filter

Replaces Fujifilm 14/18-55 lens hood, compatible with Fujifilm XF 18-55mm F2.8-4 R LM OIS lens and XF 14mm F2.8 R lens | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | The main body is made of high quality aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | Not affect the use of 58mm filter with this lens hood

Compatible with Fujifilm XF 35mm f1.4 R lens. Note: NOT fit the XF 35mm f2 R WR lens | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | The main body is made of premium aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | Not affect the use of 52mm filter with this lens hood

Replaces Sigma LH-582-02 lens hood, compatible with Sigma 18-50mm f/2.8 DC DN lens | The main body is made of high quality aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Not affect the use of 55mm filter with this lens hood

Replaces Sigma LH-582-01 lens hood, compatible with Sigma 56mm F1.4 DC DN lens | The main body is made of high quality aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Not affect the use of 55mm filter with this lens hood

Replaces Sony ALC-SH165, ALC-SH166 lens hood, compatible with Sony FE 50mm f/2.5 G lens(SEL50F25G), FE 40mm f/2.5 G lens(SEL40F25G), FE 24mm f/2.8 G lens(SEL24F28G) | Note: there are a lot of FE 50mm lenses, this lens hood NOT fits the FE 50mm f1.4, FE 50mm f1.2, FE 50mm f1.8, FE 50mm f2.8! Please double check your lens item before purchase especially the aperture number | The main body is made of high quality aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Not affect the use of 49mm filter with this lens hood

This thumb grip is specially designed for Fujifilm X-M5 camera, offers you a secure and comfortable hand hold when shooting | Made of premium aluminium alloy, solid and durable | With silicone pad between camera and grip, protects your camera from potential scratches | Easy to slide on and remove through the camera's hot shoe.Silicone pad under hot shoe cover enhances a tight fit into the hot shoe and protects hot shoe contacts | Not affect the use of camera buttons and wheels

Dedicated to the Fujifilm X-T5, X-T4 and X-T3 camera, this thumb rest improves the ergonomics and comfort while shooting. | By sliding this device into the hot shoe, you will be able to more comfortably rest your thumb against the camera body and enjoy a steadier and more secure grip, especially during one-handed operation. | The thumbs up is a design aesthetic matched perfectly to the camera, making it appear as though it naturally belongs to the camera and ensuring that it will not block access to any controls. | It is constructed from aluminum and has a microfiber leather covering on the surface for improved texture. | It's recommended to use with our Metal Hand Grip together to improve comfort. Please get more information from: Asin B0BP27JK11

This thumb up grip is specially designed for Sony A7CII and A7CR cameras, offers you a secure and comfortable hold when shooting | Made of premium aluminium alloy, solid and durable. Upgraded design of the microfiber leather on top surface improves the texture of your camera | With silicone pad between camera and grip, protect your camera from potential scratches | Add silicone cover on thumb-holding area, anti-slip and provides a more steady holding for your camera | Easy to slide on and remove, not affect the use of camera buttons

This thumb up grip is specially designed for Sony A7CII and A7CR cameras, offers you a secure and comfortable hold when shooting | Made of premium aluminium alloy, solid and durable. Upgraded design of the microfiber leather on top surface improves the texture of your camera | Add silicone cover on thumb-holding area, anti-slip and provides a more steady holding for your camera | Easy to slide on and remove | Not affect the use of camera buttons

This thumb up grip is specially designed for Nikon Zf camera, offers you a secure and comfortable hold when shooting | Made of premium aluminium alloy, solid and durable. Upgraded design of the microfiber leather on top surface improves the texture of your camera | Add silicone cover on thumb-holding area, anti-slip and provides a more steady holding for your camera | Easy to slide on and remove | Not affect the use of camera buttons

Dedicated to the Sony A7 IV and Sony A7R V mirrorless camera, this thumb rest improves the ergonomics and comfort while shooting. | By sliding this device into the hot shoe, you will be able to more comfortably rest your thumb against the camera body and enjoy a steadier and more secure grip, especially during one-handed operation. | The thumbs up is a design aesthetic matched perfectly to the camera, making it appear as though it naturally belongs to the camera and ensuring that it will not block access to any controls. | It is constructed from aluminum and has a microfiber leather covering on the surface for improved texture.

Compatibility: The metal thumbs up grip is designed for Ricoh GR III and GR IIIx | Convenience: Just slide this grip into the hot shoe, it will make you comfortable and easy to hold the camera, and provide a secure hold during shooting | Protection: Sliding into the hot shoe, to protect the hot shoe from dust, moisture & impact | Premium Materials: Made of anodized aluminum alloy, sturdy & durable, fit camera body perfectly | Not interfere with controls: Will not affect to use any other button & function of your camera

Made of premium aluminium alloy and microfiber leather - Provides a comfortable, stable and secure grip for long time usage | Can be used on universal tripod as it is dovetail QR baseplate(arca-swiss type) with an extra 1/4"-20 screw hole for universal tripod plate | Does not block the battery and memory access, it allows you access the battery and memory without taking it off | An extra hole on the right side of baseplate allow you put on a hand strap to your camera as well | A must have accessory for anyone with medium, large and up size hands and who was used to using large DSLR and longer heavier lenses

Made of premium aluminium alloy and microfiber leather - Provides a comfortable, stable and secure grip for long time usage | Can be used on universal tripod as it is dovetail QR baseplate(arca-swiss type) with an extra 1/4"-20 screw hole for universal tripod plate | Does not block the battery and memory access, it allows you access the battery and memory without taking it off | An extra hole on the right side of baseplate allows you put on a hand strap to your camera as well | A must have accessory for anyone with medium, large and up size hands and who was used to using large DSLR and longer heavier lenses

The part of camera mount is made of Aluminum, the part of lens mount is made of high quality brass, while the tube is made of high quality ABS plastic | Shortens minimum focusing distance of lens for macro photography, convert almost any lens into a macro lens, save your cost of buying an expensive macro lens | Full Autofocus and auto exposure Compatibility | Extension tubes of 10mm and 16mm lengths can be used individually or in any combination for greater magnification | Fits Panasonic and Olympus Micro Four Thirds (M4/3) cameras and Micro Four Thirds mount (M4/3) lenses

This Cold shoe adapter converts your Sony Multi interface shoe to a standard cold shoe | Fits all Sony camcorders with the Multi interface shoe | User can add LED light, microphone, monitors or other equipment to the standard cold shoe. | Increases production value of the video. | Note: This adapter is a cold adapter and has NO DATA TRANSMISSION

This cold shoe adapter converts your Canon Mini Advanced Shoe to a standard cold shoe | Fits all Canon camcorders with the Mini Advanced shoe | User can add LED light, microphone, monitors or other equipment to the standard cold shoe. | Increases production value of the video. | Note: This adapter is a cold adapter and has NO DATA TRANSMISSION

This adapter converts a Canon Mini Shoe to a universal shoe. | It allows user to mount a LED Light or Mic with universal hot shoe to the camcorders. | Please note there is no electrical connection made with this adapter, it is a universal shoe mount only. | Weight 12g; Size 25x23x24mm; Material ABS + Alumnium Alloy | Compatible with Canon Vixia HF10 HF11 HF100 HF20 HF200 HG10 HG20 HF G30 HF G40 HF G50 HF M30 HF M31 HF M300 HF M32 HF S10 HF S11 HF S20 HF S21 S100 S200

Designed to allow the use of standard cold shoe devises on Canon's Camcorders that use the Mini Advanced Shoe. | Tightens down securely and does not connect or touch the electrical contacts | Compatible to Canon Vixia HF10, HF11, HF100, HF20, HF200, HG10, HG20, HF S10, HF S100, HF M30, HF S20 and HF S200 camcorder. | Also compatible to other Canon camcorders with the "Mini Advanced Shoe | Please note there is no electrical connection made with this adapter, it is a hot shoe mount only.

Helps absorb ultraviolet light and reduce the bluish cast of daylight and reduce dust, moisture, and scratches from reaching lens elements | Crafted from 0.03" Japanese famous optical glass, double sides 12-layers of multi-resistant coating prevents internal ghosting and reflections while providing over 99.5% light transmission | 12-layers of multi-resistant coating also offers greater protection to the filter substrate and helps it to stay clean for longer than with uncoated UV filters | Ultra slim design (only 0.12" thick) to avoid vignetting on wide angle lenses | Compatible with any lens with 52mm diameter filter thread - This UV filter is double threaded, has 52mm inner thread(male) and 52mm outer thread(female), this design allows you to put on any 52mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Helps absorb ultraviolet light and reduce the bluish cast of daylight | Helps reduce dust, moisture, and scratches from reaching lens elements | Crafted from 0.03" Japanese famous optical glass, double sides 12-layers of multi-resistant coating prevents internal ghosting and reflections while providing over 99.5% light transmission | 12-layers of multi-resistant coating also offers greater protection to the filter substrate and helps it to stay clean for longer than with uncoated UV filters | Ultra slim design (only 0.12" thick) to avoid vignetting on wide angle lenses | 1x filter factor, adjustments to exposure time are not required, unlike other types of filter such as CPL filter, ND filter,etc. | Useful as a basic protective filter to leave on lenses at all times | Compatible with any lens with 62mm diameter filter thread - This UV filter is double threaded, has 62mm inner thread(male) and 62mm outer thread(female), this design allows you to put on any 62mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Helps absorb ultraviolet light and reduce the bluish cast of daylight | Helps reduce dust, moisture, and scratches from reaching lens elements | Crafted from 0.03" Japanese famous optical glass, double sides 12-layers of multi-resistant coating prevents internal ghosting and reflections while providing over 99.5% light transmission | 12-layers of multi-resistant coating also offers greater protection to the filter substrate and helps it to stay clean for longer than with uncoated UV filters | Ultra slim design (only 0.12" thick) to avoid vignetting on wide angle lenses | 1x filter factor, adjustments to exposure time are not required, unlike other types of filter such as CPL filter, ND filter,etc. | Useful as a basic protective filter to leave on lenses at all times | Compatible with any lens with 72mm diameter filter thread - This UV filter is double threaded, has 72mm inner thread(male) and 72mm outer thread(female), this design allows you to put on any 72mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

Helps absorb ultraviolet light and reduce the bluish cast of daylight | Helps reduce dust, moisture, and scratches from reaching lens elements | Crafted from 0.03" Japanese famous optical glass, double sides 12-layers of multi-resistant coating prevents internal ghosting and reflections while providing over 99.5% light transmission | 12-layers of multi-resistant coating also offers greater protection to the filter substrate and helps it to stay clean for longer than with uncoated UV filters | Ultra slim design (only 0.12" thick) to avoid vignetting on wide angle lenses | 1x filter factor, adjustments to exposure time are not required, unlike other types of filter such as CPL filter, ND filter,etc. | Useful as a basic protective filter to leave on lenses at all times | Compatible with any lens with 82mm diameter filter thread - This UV filter is double threaded, has 82mm inner thread(male) and 82mm outer thread(female), this design allows you to put on any 82mm thread accessories such as lens cap, screw-in type lens hood to the front of the filter

This neck strap is designed for DJI stabilizers with dual NATO PORTs, such as DJI RS 3 Pro, RS 3, RS 2 and RSC 2 gimbal stabilizer | Made of smooth nylon webbing material, it can effectively relieve the stress on your arms and improve stability of shooting, making your shots more clear. The maximum load capacity of neck strap is 90 kg/198.4 lb | The quick-adjusted length buckle on the shoulder strap supports one-handed length adjustment. You can quickly slide to easily adjust the length from 95cm(37.4 inch) to 150cm(59 inch) | The new patented quick-release buckles on the bottom of strap allow you to quickly attach and remove the camera | Included two NATO nails allow you to connect other DJI NATO interface devices, such as DJI Briefcase Handle, DJI R Phone Holder and other equipment

Fits lens size below 2.44''x1.57'' (62x40mm)，such as Canon EF-M 22mm f2 STM, Sony E PZ 16-50mm f3.5-5.6 OSS and Fujifilm XF 27mm F2.8. | 5mm thick high-quality neoprene protects your mirrorless lens from moisture, sand, dust and dirt. | The camera lens bag can tightly wrap the lens to prevent the risk of scratches and impact. | The precise design of the lens case cover prevents the lens from falling out and protects the lens to a greater extent. | Comes with a carabiner, convenient and safe transportation of your lens case. You can hang the lens bag on your backpack or belt, or put it in your camera bag. As a daily storage is also a good choice.

Powered by USB sources, allow you to charge your battery with USB wall charger, laptop, power bank or car charger, USB cable stores on the side of charger for easy carrying | Dual Slot for charging batteries, allow you to charge 2 batteries simultaneously (Please note battery is not included in the package) | Dual LED charging indicators display the charging status of both batteries | The charger is also with overheat and overcharge protection to prevent damage on your batteries | Fits for original Sony NP-FW50 battery and Replacement Sony NP-FW50 battery from third party, please refer to the compatible cameras in the below description