Compact Size:12.1*4.0*2.1cm, 90cm long wired remote controller, powered by 2 AAA Alkaline batteries | Self-timer, interval timer, long-exposure timer and exposure-count setting features | Take Photos without Camera Shake and great for Time-Lapse Photography | The timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec | Humanized backlight design allows you to view the LCD screen in the dark
Compact Size:12.1x4x2.1cm, 90cm/2.95ft long wired remote controller, powered by 2 AAA Alkaline batteries | Self-timer, interval timer, long-exposure timer and exposure-count setting features | Take Photos without Camera Shake and great for Time-Lapse Photography | The timer can be set anywhere from 1 second to 99 hours 59 minutes 59 seconds | Humanized backlight design allows you to view the LCD screen in the dark
The part of camera mount is made of Aluminum, the part of lens mount is made of high quality brass, while the tube is made of high quality ABS plastic | Shortens minimum focusing distance of lens for macro photography, convert almost any lens into a macro lens, save your cost of buying an expensive macro lens | Full Autofocus and auto exposure Compatibility | Extension tubes of 11mm and 16mm lengths can be used individually or in combination for greater magnification | Fits Panasonic, Leica and Sigma L mount mirrorless cameras and L mount mirrorless lenses
Heavy-duty, water-resistant exterior material, protective interior padding | Fashionable deep blue two way zipper | Mesh pocket inside the lid for putting small accessories | The narrowed double touch belt loop also fits Lowepro belt | Provides great protection and shock absorption for your lens
The LED light guide ring is designed for use with the Olympus Tough TG-7, TG-6, TG-5, TG-4, TG-3, TG-2, and TG-1 digital cameras. It replaces Olympus LG-1 light guide. | It can be put on and removed underwater and redirects light from the camera's LED to a circular area that surrounds the lens. Use the light guide can improve the quality of macro shots captured with the TG series. | Easy to attach and remove. First take off the lens adapter counterclockwise and then attach and rotate the light guide clockwise. | Made of durable ABS with an integrated diffuser, compact and lightweight. | Warm Tips: 1) This product can be left on the camera when going underwater. However, it is not recommended to use as an lighting accessory. 2) This product is not a light. 3) Please do not use the flash when the camera is equipped with the LED light guide.
【Capacity】The filter pouch provides a secure and convenient storage solution for three circular filters up to 82mm. *Note: The filters are not included. | 【Durable】The exterior of the lens filter case is made of high quality polyester material for durability as well as dustproof. Great to store and protect your lens filters. | 【Protection】Filters are placed within one of three padded elastic pockets for better protection. Foldable design and handy size 4.6x4.5x1.3” allows you to throw it into your camera bag. | 【Hook-and-loop closure & Belt Loop】It can be easily accessed by opening its hook and loop closure. What’s more, it features a belt loop on the back, putting your filters in more immediate reach. | 【What you get】Filter Pouch x1, Microfiber Cleaning Cloth x 1
【Replace HB-87 Lens Hood】 :The lens hood is compatible for Nikon NIKKOR Z 24-70mm f2.8 S Lens (Only). (Note* it’s not for NIKKOR Z 24-70mm/24-120mm f4 S Standard Prime Lens.) | 【SHOCKPROOF】 :Whether shooting in the light, backlight, night, etc., can effectively reduce the effect of stray light on the image, improve clarity. Accidental collision, which can reduce the damage of the lens, and provide extra protection for your lens. | 【REVERSIBLE】 :The lens hood can be reversed on the lens to reduce space and facilitate storage and carrying of the camera. | 【NON-GLARE MATTE FINISH】:Made of high quality ABS material, Light and Durable. Non-glare matte finish on the interior surface of the lens hood helps to minimize flare by deflecting stray light from entering the lens and no vignetting with the hood on. | 【EASY TO USE】:Easy to install, connect the hood directly to the lens through bayonet.Allows putting on a Ф82mm filter and a Ф82mm lens cap.
Compatibility: The lens hood is designed for Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR & Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED, and replaces Nikon HB-77 Hood | Unique Design: A non-glare matte finish inside to limit lens flare, so no vignetting will show. And reverse attaching to the lens saves storage space | Flexibility: With the lens hood, a filter and a lens cap can be also mounted onto the lens | Improvement: To prevent stray light from entering the lens, improving your contrast and image quality | Protection: To protect the lens from moisture, wind-blown debris & impact
【2 Packing List】 2 x Screen Tempered Film,2 x LCD Glass Screen Protectors, fully compatible with your Insta360 GO 3 action camera. | 【Clear Visuals】 Ultra-thin 0.3mm optical glass with 95% high light transmission and ultra-low reflection ensures that your Insta360 GO 3 display is unobstructed, allowing you to capture great shots to your heart's content! | 【Effective protections】9H tempered glass material and multi-layer coating technology effectively block UV rays and reducing reflections,have a strong impact resistance and long-lasting protection,great reducing dust, oil and fingerprint smudges. | 【Precise Fit】This lens screen protector is customized for Insta360 GO 3, covering the entire screen, maintaining the sensitivity of the touchscreen and preserving the original quality of the camera. | 【Easy to Install】 The protective film uses electrostatic adsorption method, easy to install and not easy to produce air bubbles, easy to remove and leave no residue.2.5D safety curved edge design, to avoid scratching your fingers during the installation process.
JJC LH-77 replaces NIKON HB-77 lens hood | No vignetting will be caused with the hood on | Reversible for easy storage - will not affect the use of lens cap | Blocks stray light from entering the lens - extra protection from accidental impact | JJC LH-77 Lens Hood is for Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR and AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED lens
JJC LH-88B Lens Hood Shade is a Replacement of ET88B hood | Allows user to put on a Ф82mm filter and a Ф82mm lens cap. | Non-Glare Matte finish prevents reflections; No vignetting will be caused with the hood on | It can also be placed backwards over the lens for a more compact storage solution.< | Compatible with Canon RF 600mm f11 IS STM
JJC LH-ET77 Lens Hood Shade is a Replacement of ET77 hood | Allows user to put on a Ф67mm filter and a Ф67mm lens cap. | Non-Glare Matte finish prevents reflections; No vignetting will be caused with the hood on | It can also be placed backwards over the lens for a more compact storage solution. | Compatible with Canon RF 85mm f2 Macro IS STM Lens
Designed for Olympus Olympus 40-150mm f/4-5.6 Zuiko ED Zoom Lens. | 100% replaces OLYMPUS Lens Hood LH-61D | Prevent unwanted stray light from entering the lens. | Ensures no problems with vignetting or motor functions. | Added benefit of extra protection from accidental impact.
Prevent unwanted stray light from entering the lens | Non-glare matte finish on the interior further preventing lens flare | With Filter Access Window | JJC LH-J66 replaces Canon lens hood Olympus M LH-J66 | Compatible with Olympus M. Zuiko Digital ED 12-40mm f/2.8 PRO Lens
JJC LH-S2860 Lens Hood consists of an Adapter Ring (Ф40.5mm) and a Petal Style Lens Hood | Allows putting on a Ф40.5mm filter and a Ф40.5mm lens cap | Non-Glare Matte finish prevents reflections; No vignetting will be caused with the hood on | It can also be placed backwards over the lens for a more compact storage solution.< | Compatible with Sony FE 28-60mm f/4-5.6 Lens and E PZ 16-50mm f/3.5-5.6 OSS Lens
Replaces Fujifilm LH-X100 lens hood, compatible with Fujifilm X100VI, X100V and X100F cameras | Made of premium aluminum alloy material, solid and durable | Included filter adapter ring allows you to attach 49mm filter on the lens. Note: filter is not included | Prevents unwanted stray light from entering the lens. Non-glare matte finish design further prevents or limits lens flare | Comes with a lens hood cap, better protect your lens from dust and accidental impact | Package contains: lens hood x 1, protective hood cap x 1, filter adapter ring x 1, hex wrench x 1, screw x 2
【Compatibility】Replaces Fujifilm LH-XF27 lens hood, compatible with Fujifilm XF 27mm f/2.8 R WR lens and XF 27mm f/2.8 lens | 【Material】The main body is made of high quality aluminium alloy, solid and durable. Bayonet mount is made of synthetic resin and no damage to your lens | 【No Vignetting】Non-glare matte finish design further prevents or limits lens flare, no vignetting will be caused with this lens hood on | 【With Protective Hood Cap】Comes with a lens hood cap, better protect your lens from dust and accidental impact | 【39mm Filter Use】Not affect the use of 39mm filter with this lens hood
Powered by USB sources, allow you to charge your battery with USB wall charger, laptop, power bank or car charger, USB cable stores on the side of charger for easy carrying | Dual Slot for charging batteries, allow you to charge 2 batteries simultaneously (Please note battery is not included in the package) | Dual LED charging indicators display the charging status of both batteries | The charger is also with overheat and overcharge protection to prevent damage on your batteries | Fits for original Canon LP-E6, LP-E6N or LP-E6NH battery and Replacement Canon LP-E6, LP-E6N or LP-E6NH battery from third party, please refer to the compatible cameras in the below description
【DJI Osmo Pocket 3 Filter Set】:This 4-Pack Filter Kit is specially designed for DJI Osmo Pocket 3, which includes CPL, ND16, ND64, and ND256.!!!NOTES:Please remove the filter before turning off the camera, otherwise it might be stuck in the lens. | 【ND Filter】:The ND16 ND64 ND256 filter reduces exposure by 4, 6 and 8 stops, offer precise exposure control during dynamic outdoor activities,while enhancing image details naturally, effectively prevent overexposure and elevate image quality across a range of sunlight conditions. | 【Polarizing Filter】It can polarize the light to eliminate unwanted reflections, enhances color saturation, and improve clarity and contrast.Such as water, glass or sky photography. | 【HD Optical Glass Filter & Multi-Layer Coating】:The filter is made of multi-layer coated HD optical glass, which ensures a clear image and true color reproduction, ensuring long lasting optical quality in challenging environments. | 【Magnetic Installation & Aluminum Frame】:With the magnetic design, the filter can be installed on the Osmo Pocket 3 lens very quickly and easily.And the aluminum alloy frame is lightweight and durable.
Holds 4 full size SD cards - stylish red edition | Compact credit card design for portability | Includes numbered slots | Contains spaces for writing the names of your SD cards | Attaches to a key ring for easy accessibility
Several individual slots to store memory cards | Prevents memory cards from dust and loss | Credit card size, lightweight and portable | With memory card patterns on the back for ease of use and can be marked | A keychain hole is designed for easy carrying | Memory cards can be inserted easily and rightly
Tough water-resistant polycarbonate case for carrying memory cards | Each slot is strictly tailored to fit the card perfectly | Two sides both allow you store memory cards | Ergonomic locking system and has a hole for easy carrying | Fits 12 SD cards
Tough water-resistant polycarbonate case for carrying memory cards | Each slot is strictly tailored to fit the card perfectly | Two sides both allow you store memory cards | Ergonomic locking system and has a hole for easy carrying | Fits for 3x cf / 6x SD cards
Designed to store 8 x SD cards | Features a rubber seal waterproof design | Dimensions (Approx): L 115 x W 80 x H 15 mm | Lightweight and easy to carry
Tough water-resistant polycarbonate case for carrying memory cards | Each slot is strictly tailored to fit the card perfectly | Two sides both allow you store memory cards | Ergonomic locking system and has a hole for easy carrying | Fits for 4 xsd cards, 8x micro SD cards
Memory Card Case fits: 2 x CF and 3 x XQD cards | Soft seal ring, effectively anti dust and resisting to water splashing | High quality environment protective materials, safe and reliable | The ergonomic tailored card slots, easy for card putting and taking | Appearance design of rectangular concave with wide intervals, beautiful and preventing slipping
Interior Size: 3.93" x 7.16"(100 x 182mm), Compatible with Canon EF 50mm f/1.2L,EF 24-70mm f/2.8L II, RF 85mm F2 or other size below 3.93" x 7.16". | Interior thickened padding and exterior water-resistant material to provides great protection from scratch, shock, rain and moisture | Includes 47.2''(120CM) shoulder straps , rear double touch belt loop for use on waist belt and a grab handle on the top,easy to carry | Mesh pocket inside the lid for putting small accessories,such as lens cap, filter and hot shoes cap. | Provides great protection and shock absorption for your lens
Bottom opening will not interfere with accesses to battery & memory card | Specially designed for Sony RX100 series cameras | Chamfer design for easily accessing to your fold-out screen | Offers a more comfortable and secure hold for shooting | Premium aluminium alloy construction is a perfect match to the camera body
Made of premium aluminium alloy, the grip area is covered with premium silicone, provides a comfortable, stable and secure grip for long time usage | Can be used on universal tripod as it is dovetail QR baseplate(arca-swiss type) with an extra 1/4"-20 screw hole for universal tripod plate | Does not block the battery and memory access, it allows you access the battery and memory without taking it off | An extra hole on the right side of baseplate allow you put on a hand strap to your camera as well | A must have accessory for anyone with medium, large and up size hands or those who worry about dropping these expensive cameras
Designed for Fujifilm X-T4 XT4 mirrorless camera | Enhances the grip for holding camera, provides a more comfortable & secure hand feeling | Accesses to battery and memory card without taking off the grip | Adopts 1/4"-20 tripod socket & Arca Swiss Type quick release plate design | Moreover, it allows you to connect hand strap for a more secure grip
Specially designed for Fujifilm X-T3 X-T2 (Doesn't fit X-T4 or X-T1) | Adopts Arca Swiss Type quick release plate design | Accesses to battery and memory card without taking off the grip | Features a slot for connecting a hand strap or wrist strap | Offers a more comfortable and secure hold for shooting
Compatibility: The lens decoration ring is designed for Ricoh GR III and Ricoh GR III HDF digital camera | Replacement: Replace Ricoh GN-1 ring cap | Protection & Decoration: To protect the lens barrel exterior. And decorate your GR III camera, making it more colorful and unique | Premium Materials: Made of aluminum alloy, durable & lightweight | 5 colors available: Black, Blue, Gold, Green or Red
Compatibility: The lens decoration ring is designed for Ricoh GR III | Replacement: Replace Ricoh GN-1 ring cap | Protection & Decoration: To protect the lens barrel exterior. And decorate your GR III camera, making it more colorful and unique | Premium Materials: Made of aluminum alloy, durable & lightweight | 5 colors available: Black, Blue, Gold, Green or Red