Made of 6061-T6 CNC machined aluminum with a black hard anodized finish | Toad (male adapter) precisely mounted on ‘’ Toad In The Hole Quick Release’’ which allows for quick movement of the gimbal from one setup to the other. | 3/8’’-16 female threaded on the bottom designed for easy mounting on any grip equipment comes with 3/8’’-16 male threaded stud | Provides a great mounting solution for the gimbal on a light stand, suction cups and a variety of grip equipment.

Attaches easily to the Kupo Front Box for various mounting options | Durable aluminum bracket with a black anodized finish | Helps keep the Kupo Front Box box in place and secure | Comes with 4 x M5 nuts and bolts

Designed to be mounted in the head of a grip head or grip arm | 5" (12.7cm) steel baby 5/8" (16mm) pin | Knurled Recess machined in the pin gives better grip and prevents light fixtures and accessories from slipping | 1/4"-20, 3/8"-16 Female Threads. The head of the pin is tapped with a 1/4"-20 thread and the collar or tail end of the pin is tapped with a 3/8"-16 thread

Oversize T handle for great torque | V jaws with a special tooth design for better grip | Non-slip, Non stick aluminum braking pad instead of fiber offers positive lock and precise control. | Fits OD 48-50mm tube

2 1/2" Grip Head w/ Fixed Baby Pin (16mm Baby Spigot) | Fixed baby pin allows one lighting fixture to be mounted on a grip head | Durable construction with a stainless steel central bolt and a fixed solid pin | Oversize T handle for great torque | V jaws with a special tooth design for better grip

Consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver | Four different sized V shaped jaws to accept any accessory with a 5/8", 1/2", 3/8", 1/4" mounting stud or tubing | Designed to fit the Super Convi Clamp and Super Viser Clamp systems

Adapter for the Convi Clamp | Hex-end design prevents unexpected rotation | 3/8" - 16 female thread and 1/4"-20 male thread

For mounting tripod heads or other accessories with a 3/8"-16 receiver. | Works great with Convi clamps Super clamps and Mafer clamps. Will not rotate in hex sockets | Mount camera heads and video heads in remote places. | Easily lock the head on the plate with the 3 locking set screws. | The 3/8"-16M threaded stud can also be used to mount other accessories like arms.

Double-sided hex stud designed for the Convi Clamp System | 3/8"-16 male and 1/4" male | Solid brass

Hex Stud with 3/8"-16F and 1/4"-20F | Designed exclusively for the Convi Clamp System

Refillable 13.2lb (6kg) capacity sandbag | Extra rivets, double stitching, interior bias binding for maximum strength | Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag

Refillable 22.4lb (10.2kg) capacity sandbag | Extra rivets, double stitching, interior bias binding for maximum strength | Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag | 22.4 lbs

Ideal for Tabletop imaging. | Can be used on tube sizes ranging from 10 to 15mm. | Works like a mini version of a double grip head. | Baby stud allows attaching to many items with a built in 5/8" receiver. | The design provides a solid locking grip and precise positioning.

Allows junior stud lighting fixtures to be mounted on a baby stand or stud | Welded junior receiver 1-1/8"(28mm) and baby receiver 5/8"(16mm) | V shape design for positive lock | Constructed with solid steel | Chrome plating

3/8"-16 Female to 1/4"-20 Male . | Adapter made of brass

Dual male stud with 3/8’’ to 1/4’’ thread adapter | Converts a 3/8"-16" female thread into a 1/4"-20 male thread

Replacement Pad for Kupoles - bottom | Color: White | Size: 3.3 x 2.0 x 3.3" (8.4 x 5.1 x 8.4 cm)

Replacement Pad for Kupoles - top | Color: White | Size: 3.25 x 1.91 x 3.25" (8.26 x 4.85 x 8.26 cm)

Connects a lighting fixture to a convi clamp | Connects a lighting fixture to an arm with a grip head. | Double 5/8’’ baby stud | Made of chrome plated steel | Length: 4.9 inches (125mm)

Includes standard 5/8" stud with 3/8"-16 thread and comes with 3/8"-16 female to 1/4"-20 male adapter | Lightweight at only 1.7lb (0.8Kg) and supports up to 3.3lb (1.5Kg) | Perfect for low angel shots or for a backlight

Chrome plated | Adapter for the Convi Clamp | Hex-end design prevents unexpected rotation | Length: 2.00" /51mm

Chrome plated | Adapter for the Convi Clamp | Hex-end design prevents unexpected rotation | Length: 2.21" / 56mm

Easily convert a male 3/8"-16 to a 5/8" baby with a 1/4"-20 thread (Standard Stand Top) | Use when you to want a baby pin mount on a tripod | Works well with Convi and Super Claw Clamps. | Places a baby spigot on top of numerous items like suction cups

Adjustable arm allows positioning a camera lighting fixture or accessory within seconds | Supports loads of up to 8.8 lbs (4 Kg) | Joints loosen and tighten simultaneously with a single handle | Six milled flat surfaces for secure mounting

Adjustable arm allows positioning a camera lighting fixture or accessory within seconds | Supports loads of up to 8.8 lbs (4 Kg) | Large rubberized hand wheel allows joins to lock at same time for precise positioning | Six milled flat surfaces for secure mounting

Steel spring clamp | Accepts any baby 5/8" (16mm) stud | Compact - opens from 0.2" - 1.4" (5-35mm) | Color - Black

Steel spring clamp | Accepts any baby 5/8" (16mm) stud | Compact - opens from 0.2" - 1.4" (5-35mm) | Color - Silver

Fits a number of camera and lighting accessories. | Connects easily to any accessory or device with a 5/8" receiver. | When connected to a Kupo Convi Clamp this arm can virtually be clamped anywhere. | Each baby pin is equipped with either a 3/8"-16 or 1/4"-2 threaded receiver. Allowing for additional connections. | Provides a solid locking arm for ease of positioning of lights and cameras.

Perfect accessory to hold small items such as a mini flag or reflector | 3/8"-16 female thread inside a baby 5/8" (16mm) adapter on one side and an alligator clip on the other | Length 11.4" (29mm) | Can be placed in any baby receiver, any hex receiver, and can be screwed onto any 3/8"- 16 male thread | Limited two-year warranty

Features a 5/8" ( 16mm ) baby stud instead of 3/8" (10mm) shaft for connecting with lightweight lighting fixtures and any accessories with 5/8" (16mm) baby receiver. | A 1/4"-20 threaded female is designed for fitting into variety of lighting and video accessories. | Maximum gripping range up to 2" (51mm). | Groove design keeps jaws aligned | Limited two-year warranty

Lightweight, ideal for car mount | Compact for easy transportation and storage | Two 5/8" receivers in each lateral face | 3/8"-16 in each base for variety of combinations | Constructed from CNC aluminum alloy with black anodized finish

Industrial grade non-slip rubber | Low tack surface prevents slipping | Light cushioning to prevent scratching | Can handle temperatures up to 176 degrees Fahrenheit | Dimensions 15.75" x 10.63" x 0.08"

Lightweight and low profile professional coupler,developed for installations where load capacities of up to 264lbs (120kg) are required | TUV approval, Unique window for safety wire access | M10 hex head bolt standard, double level's counter sunk for M10 or 3/8" hex head bolt. | Fits O.D. 32-38mm tube | High tensile 6061-T6 aluminum SWL: 264lbs (120kg) - Black Finish

Lightweight and low profile professional coupler, developed for installations where load capacities of up to 264lbs (120kg) are required | TUV approval, Unique window for safety wire access through. | M10 hex head bolt standard, double level's counter sunk for M10 or 3/8" hex head bolt | Fits O.D. 32-38mm tube | High tensile 6061-T6 aluminum SWL: 264lbs (120kg) - Polished Silver

Quickly converts a painter's pole into a hand held boom. | Black anodized aluminum construction | 3/4"-5 female thread common with painter's poles | Removable 1/4"-20 male screw. | Includes a baby 5/8" pin with 1/4"-20 male thread

Length: 137" (3.5M) | Blue color identification | Weight: 0.5 lb (226.8 g) | Durable plastic chain | Free length adjustment

Designed to work with the Kupo Quick Release Adapter | Hexagonal shape on the bottom to securely engage into the Kupo Quick Release Adapter's spring-loaded ball bearing mechanism. | Allows quick release mounting of monitors microphones or any item with a 1/4"-20 threaded receiver | Rotating locking collar to secure any device with a 1/4-20" receiver | Keep the mount attached to your device at all times to provide fast easy switching of accessories

Designed to work with the Kupo Quick Release Adapter | Hexagonal shape on the bottom to securely engage into the Kupo Quick Release Adapter's spring-loaded ball bearing mechanism. | Allows quick release mounting of monitors microphones or any item with a 3/8"-16 threaded receiver. | rotating locking collar to secure any device with a 3/8"-16" receiver | Keep the mount attached to your device at all times to provide fast easy switching of accessories

Designed to work currently with 4 different Kupo top mounts. | The hexagonal shaped receiver securely engages Kupo Quick Release Adapter Male top mounts providing easy connection of accessories that go around your camera set-ups. | Quickly change your connections by pushing the red release collar down. | Works great in combination with Kupo Vision Arm and Max arms. | Can easily provide a quick release mount when attached to arms brackets or tripods

T-slotted ear designed for dropping in to 4.5" grip head | Black Powder coating | A safety T-slotted ear designed to avoid unexpected drop-off | Designed for locking down the 30mm frame tube | Frame Ear designed for overhead stand