Works on anything with a 1/4"-20 male threaded shaft. | Similar to KG014412 but with a round plate diameter size of 2.3" /59mm. | 3 locking set screws to additionally hold down your device if needed. | Made from lightweight aluminum
Winged design allows this bag to be draped over stands or booms. | Marked on the blue label for easy weight identification. | Built-in handle allows for easy transportation between shoots. | Water resistant polyurethane coating on the inside | Limited two-year warranty
Lightweight and low profile professional coupler, developed for installations where load capacities of up to 110lbs (100kg) are required | 30mm wide slim type half coupler with 5/8" (16mm) baby receiver | 2nd safety lock system holds items in place even if the screw lock comes undone. | Fits O.D.48-51mm tube | High tensile 6061-T6 aluminum SWL:110lbs (50kg) - Polished Silver
Loading weight is up to 220lbs (100kg) | Fits tubes 48mm-51mm | Equipped with a 5/8in (16mm) baby pin for lightweight luminaires | The thread is captive for preventing the wing nut from falling off | Constructed from high tensile aluminum extrusion
Comes with half coupler for 2" (50mm) tube | Perfect for hanging pipe to strut channel | Made by galvanized steel & aluminum extrusion coupler | Weight: 1.54lbs (0.7kg) | Loading: 440lbs (220kg)
Designed for mounting Arri standard rosette-style accessories | A great mouting solution that fits tube sizes from 13mm-35mm or a flat object from 5mm-20mm | Allows for 360 degree rotation | Features extra 3/8in-16 female thread on the super claw | Clamp is made of aluminum alloy
Ensure stability of your lighting fixtures, camera when drilling into sand of soft ground | 5/8" baby receiver and 1-1/8" junior pin for fitting into various stand tops | Allows 360 degree rotation and 115 degree pivoting | Knob can be stored on the ball joint pivot holder while inserted into junior receiver | Made of chrome plate steel
ADAPTABLE: Innovative modular system | LOAD CAPACITY: Supports up to 17.6lbs (8kg) | VERSATILE: Many interchangeable accessories available - ideal for use with a convi-clamp | EASE OF USE: Single knob secures both ball joints simultaneously | SOLID: Constructed from aluminum alloy
Design for position camera in almost any desired position, especially for car mount shooting | Extension riser with 3/8"-16 male thread in one head and 3/8-16" female thread in the other | Extended height from 10.7"(27cm) to 17"(43cm) | Allow 360 degree rotation and 90 degree pivoting | Constructed from black anodized aluminum
Mini extension arm with a hexagonal stud on one side and a baby 5/8" (16mm) receiver on the other | Aluminum construction with steel ball clamps | Designed for the Convi and Super Viser clamps | Country of Origin: CHINA
Allows for mounting 2 Kino Flo Lamps or T12 lamps | Twist-Lock Mounting Plate is equipped with rubberized spring clips | 3/8in holes spaced 1in for combing with a standard cheese plate | Constructed from lightweight aluminum
Lightweight, ideal for car mount | Compact for easy transportation and storage | Two 5/8" receivers can easily be locked down rapidly | 360 degree swivel capability | Constructed from CNC aluminum alloy with black anodized finish
Can support up to 75lbs. | Feartures one 55mm dia. solid ball head and tightening knob to allow locking the camera's position quickly | The base is made of 3/8in thick aluminum cheese plate measuring 8in x 8in | The cheese plate comes with the industrial standard 3/8in holes, spaced every 1in | The top mounting plate comes with a 3/8in (10mm) slot 3.9in (100mm) in length allowing it to use a standard Arri Sliding Base
Designed for holding field monitors or accessories | Cut-out in the sleeve surrounding the ball allows the thread to be rotated 90 degrees. | Central elbow rotates 360 degrees for infinite adjustability | Limited two-year warranty
Hang lighting fixture by placing cut lumber at each end of spreader | Can be used vertically and horizontally | Fits 2"x 4" lumber | Easy to ensure a tight fit to wall | Made of solid steel
Wrap around light stands tripod bases or hang midway on a stand to offset the weight of something. | Great to weight an offset boom arm. | Prefilled with 2mm steel balls | Marked on the blue label for easy weight identification