5 x 10/100Mbps Ethernet ports (PoE output on port 5), | RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes | The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location | Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and an SFP cage, for connecting active or passive | 720 MHz CPU nominal frequency, 128 MB RAM, 16 MB storage | RB962UiGS-5HacT2HnT-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed

KEY FEATURES: 10 Gigabit SFP+ RJ45 The S+RJ10 is a new and unique 6-speed RJ-45 module that opens up

S-35/53LC20D is a pair (S-35LC20D and S-53LC20D) of SFP transceiver | S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM | S-53LC20D is a 1.25G Single Mode optical SFP transceiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM | Tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN CCR1036-12G-4S | Connector: LC UPC; Data Rate: 1.25G; Distance: 20KM; Format: SFP; Mode: SM; Tested ambient temperature: -40 to +70C

Up to 1.25 Gb/s bi-directional data links | 100m transmission over unshielded | Compliant with IEEE Std 802.3TM-2002 | Compliant with SFP MSA | RJ-45 connector

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard | This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks | They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards | They also are direct attached compliant and fully conform to the SFP+ MSA specifications

This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality | We have added 25G SFP28 support - so you can use one module in all your setups | Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices | Connector: Dual LC UPC; Data Rate: 1G / 10G / 25G; Distance: 10km; Format: SFP / SFP+ / SFP28 | MTBF: Approximately 200'000 hours at 25C; Mode: Single; Wavelength: 1310 nm

A compact yet highly capable 10 Gigabit Ethernet switch designed to simplify your network setup routine | Versatile Mounting Options | Multiple Powering Options for Ultimate Reliability | Innovative Design Meets Silent Operation | Powered by a dual-core ARM CPU

Mikrotik 24HPOW adapter High power | High power 24V 2.5A power supply + power plug | Recommended for long cable runs with several high power wireless cards | Input Voltage 100/240V 1.6A, Operating Temperature 30℃ to +50℃, Output Voltage 24V 2.5A | Included parts: IEC cord

The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port | The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy, plus it's very sleek and compact metallic case without any fans, for silent operation | It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS | If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings | 800 MHz CPU nominal frequency, 141 x 115 x 28 mm Dimensions, 512 MB RAM, 16 MB Storage size, 802.3af/at PoE in

ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum | Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces | It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately) | The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape | The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors

Audience is a tri-band (one 2.4 GHz & two 5 GHz ) with Meshing technology. | CPU: 4 core IPQ-4019 716 MHz | Memory: 256MB DDR SDRAM | Ethernet: 2x 10/100/1000 Mbit/s Fast Ethernet ports | OS: MikroTik RouterOS, Level4 license

The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings | The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards, and will provide coverage in 360 degrees around it | Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output (up | The cAP ac is a feature packed device with a sleek enclosure, that can become inconspicuous with the push of a button - the customizable mode button in the device center will turn off all lights and sounds at it’s default configuration, but can be re | cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

US VERSION

W126331494

The CRS309-1G-8S+ is a very compact, yet powerful networking switch | It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps | The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS) | The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside | Special rackmount ears for installing unit into the standard rack are provided

MikroTik RouterBOARD CSS610-8P-2S+IN
Cloud Smart Switch 610-8P-2S+IN with 8x Gigabit PoE-out

Chateau LTE6-US carrier-certified home access point with LTE6 support for speeds up to 300 Mbps. | With 5x Gigabit Ethernet ports, a powerful quad-core CPU, and a refreshingly tasteful design, this device is the right choice for most homes. | It is a high-speed, dual-band home access point with a powerful quad-core ARM CPU and our newest CAT6 LTE modem. | Chateau LTE6 provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. | Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation, so there is no need to wait for cable network expansions.

GPER

The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless | Mikrotik GrooveA 52 ac also known as RBGrooveGA-52HPacn is now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel) | The Groove A (AP model) comes with Level 4 license and includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz) | The device has a built-in N-male connector and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable | CPU nominal frequency: 720 MHz; Size of RAM: 64 MB; PoE in: Passive PoE; 10/100/1000 Ethernet ports: 1

The hAP ac lite (RB952Ui-5ac2nD-TC) is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time | Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5) | Dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license | New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided | Size of RAM: 64 MB; Storage size: 16 MB; Dimensions: 34 x 119 x 98mm; PoE in/PoE out: Passive PoE; PoE-out ports: Ether5

The hAP ac lite also known as RB952Ui-5ac2nD is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time | Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5) | Dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license | Dimensions: 113 x 89 x 28mm, PoE in/out: Passive PoE, PoE in input Voltage: 12-30 V | 10/100 Ethernet ports: 5, Number of USB ports: 1, Max power consumption: 8 W

The hAP mini is a small 2GHz wireless access point for home or small offices. | The hAP mini (RB931-2nD) has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options. | The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it. | The unit is powered by microUSB and measures only 8 cm tall. Even with it’s small size, the hAP mini is still quite powerful, as it uses the QCA9533 CPU, just like the bigger units in the widely successful hAP series. | The hAP mini (RB931-2nD) has an omnidirecional antenna built-in, and does not have a strict limiation on number of connected clients. It works in 2 GHz and supports 802.11b/g/n standards.

The hEX RB750Gr3 is a five port gigabit Ethernet router for locations where wireless connectivity is not required. | The device has a full size USB port. USB slot type is USB type A This new updated revision of the hEX brings several improvements in performance. | It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880MHz CPU and 256MB RAM, capable of all the advanced configurations that RouterOS supports. | CPU core count:2; Size of RAM:256 MB | Supported input voltage:8 V - 30 V; Operating System:RouterOS

MikroTik L009UiGS-2HaxD with Dual core 800MHz CPU, 512MB RAM, 8 x, W128339232 (800MHz CPU, 512MB RAM, 8 x Gbit LAN, 1 x 2.5 Gbit SFP Port, 2.4 GHz 802.11b/g/n/ax Dual-Chain Wireless,) US Version

Mikrotik

OmniTIK 5 ac features five Gigabit Ethernet ports and support for 802.11ac | OmniTikG-5HacD is equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) | Comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit | CPU nominal frequency: 720 MHz; Size of RAM: 128 MB; Operating System: RouterOS | OmniTIK 5 ac US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed

The DISC Lite5 ac US Version (RBDiscG-5acD) is a low cost high gain 5 GHz CPE. | DISC Lite5 ac is equipped with 21 dBi dual chain antenna, 802.11a/n/ac integrated wireless, 716 MHz CPU, 256 MB RAM, 1x Gigabit Ethernet port and RouterOS Level 3 license. | It comes complete with a power supply, Gigabit PoE injector and a mounting ring. | The DISC Lite5 ac is also compatible with our SXT mounting systems, including the quickMOUNT pro series. | DISC Lite5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach. Unit comes with Type A power plug | Especially useful in homes with thick walls, where you can extend Wi-Fi coverage to those rooms, where signal is poor, without having to re-wire your house. | Simply plug this device directly into one of the LAN ports of your MikroTik router, and add another one somewhere further in your premises. | They will link together through the power lines. You can install up to eight PWR-LINE devices to further build your network. | The PWR-LINE AP is a wireless access point with a single Ethernet port, a built-in 802.11b/g/n WiFi radio and capability to connect to other PWR-LINE devices through the electrical lines in your premises. (Type A plug, US plug)

RBPOE Low-cost passive PoE base unit for powering passive PoE devices over ethernet | Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device | Helps reducing number of wires that lead up the tower, and in other situations | For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables | MTBF: Approximately 100'000 hours at 25C, Output Voltage: Same as input, PoE in: 10 - 28 V

876538

This NetMetal 5 (RB922UAGS-5HPacD-NM) US Version is equipped with a miniPCI-express slot a SIM slot for 3G/4G device or additional wireless card | A high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas | The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure (IP66) | Its solid aluminum enclosure also works as a reliable heat-sink for its high output power radio | The NetMetal is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office | It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access | The home Access Point lite (hAP lite) can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button | Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others | The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included

RBGROOVEGA-52HPACN

The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile | You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you | It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device | The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz | 2.4GHz Dual Chain access point with a 650MHz CPU, 64MB RAM and one Ethernet

2.4Ghz 1000mW AP | 5x Ethernet, PoE output on port 5 | USB, 600MHz CPU, 128MB RAM

RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP | Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc | cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location | Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network | Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors

Groove-52HPn US Version (Groove 52) is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use | It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high output power | It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align | Box contains: Groove unit, mounting loops, PoE injector and power adapter | 177x44x44mm, 193g Dimensions, 64 MB RAM, Passive PoE (PoE in), 802.11a/b/g/n Wireless 2.4 GHz/5 GHz standards, 10/100 Ethernet ports

RB/750 - The hEX lite is a small five port Ethernet router enclosed in a durable plastic case | The RB750r2 (hEX lite) is a small five port ethernet router in a nice plastic case. | There simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all. | Not only it's affordable, small, good looking and easy to use - It's probably the most affordable MPLS capable router on the market | No more compromise between price and features - RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment.

The mAP also known as RBmAP2nD is a micro wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities | It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack | The mAP also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it | 650MHz CPU, 64MB RAM, 2xEthernet, PoE out, Antenna 1.2dBi built in, Dimensions 68x68x19mm, Ethernet 2x 10/100 Mbit/s Ethernet with Auto-MDI/X | Included parts: 24V 0.8A power adapter, microUSB type B to USB type A adapter