Specification:
Circuit Rating: DC 35V, 100mA, 1W
Contact resistance: 10- 500Ω (Varies according to wire lengths and material used)
Insulation resistance: 100MΩ 100V
Dielectric Strength: 250VRms (50 ~ 60Hz 1min)
Electric shock jitter: <5ms
Life span: over 1 million times
Key Operating Force: 150-200N
Rebound time: 1 ms
Operating pressure: Touch feeling: 170 ~ 397g (6 ~ 14oz)
Switch travel: touch-type: 0.6 ~ 1.5mm

Environment Parameters:
Operating temperature: -40 to 80
Temperature: from 40,90% to 95%, 240 hours
Vibration: 20G, max. (10 - 200Hz, Mil-SLD-202 M204.Condition B)

How keypad works & How to scan them?
The working principle is very simple. Pressing a button shorts one of row lines to one of column lines, allowing current to flow between them.

A microcontroller can scan these lines for a button-pressed state. To do this, it follows steps below.
1.Microcontroller sets all column and row lines to input.
2.Then, it picks a row and sets it HIGH.
3.After that, it checks column lines one at a time.
4.If column connection stays LOW, button on the row has not been pressed.
5.If it goes HIGH, microcontroller knows which row was set HIGH, and which column was detected HIGH when checked.
6.Finally, it knows which button was pressed that corresponds to detected row & column.

Package Included:
10pcs 4X4 Matrix Array Membrane Switch Keypad Keyboard