[Size] Joins male/female flange 3.0" ID to 3.0" pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange. | [Feature] Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] 304 Stainless steel clamp and flanges; 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

[Size] Joins male/female flange 3.0" ID to 3.0" OD pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. | [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] Stainless steel clamp and flanges; chromium-molybdenum steel T bolt. | [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc.

[Size] Joins male/female flange 3.0" ID to 3.0" OD pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. | [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] Stainless steel clamp and flanges; chromium-molybdenum steel T bolt. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

Size: joins 3.5" OD pipe to 3.5" OD pipe, width of strap: 3inch /76.2mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Size: joins 3.5" OD pipe to 3.5" ID pipe, width of strap: 2.94inch /74.82mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

[Size] Joins male/female flange 3.5" ID to 3.5" OD pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. | [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] Stainless steel clamp and flanges; chromium-molybdenum steel T bolt. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

[Size] Joins male/female flange 3.5" ID to 3.5" OD pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. | [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] Stainless steel clamp and flanges; chromium-molybdenum steel T bolt. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

[Specifications] ID: 3/16"(5mm); OD: 0.43"(11mm). Minimum Bend Radius: 1.96"(50mm). Wall thickness: 3mm. | [Parameter] Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. | [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. | [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. | [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.

ID: 3/16inch (5mm),OD: 0.43inch(11mm).Material: NBR. | Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 1.96inch(50mm). | Applicable Medium: 3/16 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 25ft 3/16inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.

[Specifications] ID: 3/4"(19mm); OD: 1.1"(28mm). Minimum Bend Radius: 5.9"(152mm). Wall thickness: 3mm. | [Parameter] Working Pressure: 200psi. Burst Pressure: 800psi. Temperature Range: -40°F to 257°F. | [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. | [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. | [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.

[Specifications] ID: 3/4"(19mm); OD: 1.1"(28mm). Minimum Bend Radius: 5.9"(152mm). Wall thickness: 3mm. | [Parameter] Working Pressure: 200psi. Burst Pressure: 800psi. Temperature Range: -40°F to 257°F. | [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. | [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. | [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.

[Size] ID: 3/4" (19mm), tolerance is ±0.6mm; OD: 1.10" (28mm), tolerance is ±0.8mm; Length: 10 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 152mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 3/4" (19mm), tolerance is ±0.6mm; OD: 1.10" (28mm), tolerance is ±0.8mm; Length: 15 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 152mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 3/4" (19mm), tolerance is ±0.6mm; OD: 1.10" (28mm), tolerance is ±0.8mm; Length: 20 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 152mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Specifications] ID: 3/8"(9.5mm); OD: 2/3"(17mm). Minimum Bend Radius: 3.9"(100mm). Wall thickness: 3mm. | [Parameter] Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. | [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. | [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. | [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR. | Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm). | Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling, steam emission,please check the pressure of application before perchase. | EVIL ENERGY provide 5ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message.

Size: ID:10mm (3/8").OD:16mm. Length:5FT (1.5 Meter) | Wall thickness: The wall thickness of the vacuum tube is 3mm, which can prevent collapse under vacuum. | Material: FDA compliant food grade pure silicone | Working Pressure: 43PSI. Burst Pressure: 100PSI (high temperature),130PSI (room temperature). Temperature range: -40°F to 428°F (-40°C to 220°C). | Application: Ideal for automotive vacuum lines, turbo vacuum hose, boost vacuum hose, etc.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 3/8inch (10mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 3/8inch (10mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems.

[Size] ID: 3/8" (9.5mm), tolerance is ±0.4mm; OD: 5/8" (16mm), tolerance is ±0.5mm; Length: 10 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 76mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 3/8" (9.5mm), tolerance is ±0.4mm; OD: 5/8" (16mm), tolerance is ±0.5mm; Length: 20 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 76mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 3/8" (9.5mm), tolerance is ±0.4mm; OD: 5/8" (16mm), tolerance is ±0.5mm; Length: 25 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 76mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

Size: The thread size of 3an is 3/8-24 UNF. | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.

Size: The thread size of 3an is 3/8-24 UNF. | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.

Size: The thread size of 3AN is 3/8-24 UNF, and the thread size of AN3 ORB is 3/8-24 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 3AN is 3/8-24 UNF, and the thread size of AN4 ORB is 7/16-20 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 3AN is 3/8-24 UNF, and the thread size of AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 3AN is 3/8-24 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

[Size] 1/4" NPT to AN3, the thread size of 3AN is 3/8-24 UNF, Degree: 90 degree elbow | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN3 to 1/4" NPT, the thread size of 3AN is 3/8-24 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN3 to 1/8" NPT, the thread size of 3AN is 3/8-24 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 3/8" NPT to AN3, the thread size of 3AN is 3/8-24 UNF | Material: Made of aluminum alloy 6061-T6, anodized black surface | Sealing: The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread | Application: Widely used in fuel system, cooling system, power steering system, etc | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Recommended to use a wrench for installation and removal, 5-10 seconds to complete installation

[Size] 3AN flare to 1/8" NPT, the thread size of 3AN is 3/8-24 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Joins 4.0" OD pipe to 4.0" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. | Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware. | The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

Size: joins 4.0" OD pipe to 4.0" OD pipe, width of strap: 3inch /76.7mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M26 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 79 N·m.

Size: joins 4.0" OD pipe to 4.0" OD pipe, width of strap: 3inch /76.9mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M35 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 88 N·m.

[Size] Joins male/female flange 4.0" ID to 4.0" OD pipe. T-Bolt thread size: M8*1.25. | [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. | [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] Stainless steel clamp and flanges; chromium-molybdenum steel T bolt. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

[Size] 4AN to 1/4 inch barb, and thread size of 4an is 7/16-20UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 250℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 4AN to 1/4 inch barb, and thread size of 4an is 7/16-20 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 4AN to 1/4 inch barb, and thread size of 4an is 7/16-20 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.