[Size] 4AN to 1/4 inch barb, and thread size of 4an is 7/16-20 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Size: The thread size of 4an is 7/16-20 UNF. | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.

Size: The thread size of 4an is 7/16-20 UNF. | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.

Size: The thread size of 4AN is 7/16-20 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 4AN is 7/16-20 UNF, and the thread size of AN10 ORB is 7/8-14 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 4AN is 7/16-20 UNF, and the thread size of AN3 ORB is 3/8-24 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 4AN and AN4 ORB is 7/16-20 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 4AN and AN4 ORB is 7/16-20 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 4AN is 7/16-20 UNF, and the thread size of AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 4AN is 7/16-20 UNF, and the thread size of AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

4an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉. | Package includes: 10pcs 4an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 6pcs 4an hose separator clamp,2pcs 4an to 4an Fitting and 4an braided fuel line (Length: 10 Feet). Hose ID: 7/32". Hose OD: 0.43inch. | EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.

4an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum Working Pressure: 750psi. Bursting Pressure: 2250psi. Temperature Range: -40℉ to 257℉. | Package includes: 10pcs 4an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 4an hose separator clamp and 4an braided fuel line (Length: 20 Feet). Hose ID: 0.22". Hose OD: 0.44inch. | 4an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

[Maximum Working Pressure] This 4an braided fuel line can stand high pressure, with long-lasting lifespan. Maximum working pressure: 750psi; bursting pressure: 2250psi; temperature Range: -40℉ to 257℉. | [Material] 4an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid. | [Compatibility] The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | [Suitable for Widely Usage] The 4an braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line. | [Size and Installation] Hose ID: 0.22 inch ; Hose OD: 0.44 inch; Length: 10 Feet. Installation instructions are included. Work with 4AN swivel hose end only.

[Maximum Working Pressure] This 4an braided fuel line can stand high pressure, with long-lasting lifespan. Maximum working pressure: 750psi; bursting pressure: 2250psi; temperature Range: -40℉ to 257℉. | [Material] 4an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid. | [Compatibility] The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | [Suitable for Widely Usage] The 4an braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line. | [Size and Installation] Hose ID: 0.22inch ; Hose OD: 0.44 inch; Length: 5 Feet. Installation instructions are included. Work with 4AN swivel hose end only.

[Size] The thread size of 4AN is 7/16-20UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 4AN is 7/16-20UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 250℉. | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 4AN is 7/16-20 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 4AN is 7/16-20 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 4AN is 7/16-20 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

Size: AN4 to 1/4" NPT, the thread size of 4AN is 7/16-20 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN4 to 1/8" NPT, the thread size of 4AN is 7/16-20 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] AN4 to 3/8" pipe, the thread size of 4AN is 7/16-20 UNF. | [Material] Made of aluminum alloy 6061-T6, anodized black surface, bright appearance, anti-corrosion. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] Thread Size of 4AN PTFE Fitting is 7/16-20UNF. | [Application] The PTFE Hose End only work with PTFE fuel line. | [Parameter] Working pressure: 1500PSI. Temperature range: -65°F-252°F. | [Seal] The AN side is sealed by a 37 degree angle. | [Material and Feature] Made of aluminum alloy 6061-T6. 360° Swivel design for easy assembly.

[Size] Thread Size of 4AN PTFE Fitting is 7/16-20UNF. | [Application] The PTFE Hose End only work with PTFE fuel line. | [Parameter] Working pressure: 1500PSI. Temperature range: -65°F-252°F. | [Seal] The AN side is sealed by a 37 degree angle. | [Material and Feature] Made of aluminum alloy 6061-T6. 360° Swivel design for easy assembly.

Size: 4AN flare to 1/4" NPT, the thread size of 4AN is 7/16-20 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]4AN flare to 1/4" NPT, the thread size of 4AN is 7/16-20 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]4AN flare to 1/8" NPT, the thread size of 4AN is 7/16-20 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 4AN flare to 3/8" NPT, the thread size of 4AN is 7/16-20 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size]4AN flare to 3/8" NPT, the thread size of 4AN is 7/16-20 UNF, Degree: 90 degree elbow. | [Material] Made of aluminum alloy 6061-T6, anodized black surface. | [Sealing] The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | [Application] Widely used in fuel system, cooling system, power steering system, etc. | [Notice] To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: joins 5.0" OD pipe to 5.0" OD pipe, width of strap: 3inch /76.2mm. | Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Size: joins 5.0 inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm. | Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc. | Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed to provide a seal.Torque: 63 N·m.

[Size] Joins male/female flange 5.0" ID to 5.0" pipe. T-Bolt thread size: 5/16-24 UNF. | [Advantage] V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange. | [Feature] Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation. | [Material] 304 Stainless steel clamp and flanges; 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance. | [Application] Compatible for exhaust system, turbocharger, downpipe, muffler etc.

[Specifications] ID: 5/16"(8mm); OD: 9/16"(14mm). Minimum Bend Radius: 3.14"(80mm). Wall thickness: 4mm. | [Parameter] Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. | [Medium] The NBR fuel hose compatible with diesel, oil, gasoline, biodiesel, grease, etc. | [Material] The 30R7 fuel hose is made of NBR and braided polyester fiber, oil and wear resistant. | [Application] The fuel hose meets and exceeds SAE 30R7 standards, widely used for fuel system,oil cooling,steam emission, etc.

ID: 5/16inch (8mm),OD: 9/16inch(14mm).Material: NBR. | Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.14inch(80mm). | Applicable Medium: 5/16 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 5ft 5/16inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message

ID: 5/16inch (8mm);OD: 9/16inch(14mm).Material: NBR. | Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.14inch(80mm). | Applicable Medium: 5/16 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase. | EVIL ENERGY provide 25ft 5/16inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 5/16 inch OD. Fit for 5/16" fuel hose. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems.

Size: 5/16inch (8mm) OD. | Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

[Size] ID: 5/16" (8mm), tolerance is ±0.4mm; OD: 0.55" (14mm), tolerance is ±0.5mm; Length: 10 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 64mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

Package includes: 4pcs 10ft(3m) silicone vacuum hoses with inner diameter of 5/32"(4mm), 1/4"(6mm), 5/16"(8mm) and 3/8"(10mm). | Wall thickness: The wall thickness of the vacuum tube is 3mm, which can prevent collapse under vacuum. | Material: FDA compliant food grade pure silicone. | Working Pressure: 43PSI. Burst Pressure: 100PSI (high temperature),130PSI (room temperature). Temperature range: -40°F to 428°F (-40°C to 220°C). | Application: Ideal for automotive vacuum lines, turbo vacuum hose, boost vacuum hose, etc.

Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 5/32inch (4mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.