Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring. | Size: 5/32inch (4mm) OD. | Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉. | Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended) | Application: The fuel line check valve is widely uesd in carburetors and low pressure fuel systems.

[Size] ID: 5/8" (16mm), tolerance is ±0.5mm; OD: 0.94" (24mm), tolerance is ±0.6mm; Length: 10 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 5/8" (16mm), tolerance is ±0.5mm; OD: 0.94" (24mm), tolerance is ±0.6mm; Length: 15 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 5/8" (16mm), tolerance is ±0.5mm; OD: 0.94" (24mm), tolerance is ±0.6mm; Length: 20 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] ID: 5/8" (16mm), tolerance is ±0.5mm; OD: 0.94" (24mm), tolerance is ±0.6mm; Length: 25 feet. | [Material] Made of EPDM rubber. | [Parameter] Working Pressure: 100psi; Burst Pressure: 300psi; Temperature Range: -40°F to 257°F; Min Bending Radius: 128mm. Meets and exceeds SAE 20R3 Standard Wall Class D-2 requirements. | [Medium] Compatible with coolant, water, antifreeze, etc. | [Application] Used in hot water heater, engine's cooling system, connecting the radiator to the overflow reservoir, etc.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 250℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

The female AN6 180 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 6AN 180 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Fuel hardline fitting: Only compatible with hard tube. | Size: 6AN to 3/8 inch,the thread size of the 6AN is 9/16UNF.It's fits to 3/8" OD hardline,please measure before perchase. | Material: Made of aluminium alloy fitting and brass ferrule. | Application: This 3/8 hardline to 6an fitting is widely used in Brake System / Air & Fuel Delivery/ Engine Modification / Oiling System / Cooling System. | Maximum working pressure: 4000PSI,Working temperature: -65°F to 252°F.

Size: The thread size of 6an is 9/16-18 UNF. | Seal: The AN flare is sealed at a 37 degree angle. | Parameter: Max Working Pressure: 1500 PSI. Working Temperature Range: -65º F to 252º F. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Function: The fitting caps block off fuel hose line, prevent dirt and debris from entering fittings and adapters.

Size: The thread size of 6AN and AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN is 9/16-18 UNF, and the thread size of AN10 ORB is 7/8-14 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN is 9/16-18 UNF, and the thread size of AN4 ORB is 7/16-20 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN and AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN and AN6 ORB is 9/16-18 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN is 9/16-18 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN is 9/16-18 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

Size: The thread size of 6AN is 9/16-18 UNF, and the thread size of AN8 ORB is 3/4-16 UNF. | Seal: The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring. | Material: Made of aluminum alloy 6061-T6 body and NBR rubber O-ring. | Parameter: Working pressure: 1500PSI. Working temperature：-65°F-252°F. O-ring temperature range: -4°F-392°F. | Application: Suitable for fuel rail, oil cooler, fuel pump, fuel pressure regulator, fuel filter, etc.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum Working Pressure: 750psi. Bursting Pressure: 2250psi. Temperature Range: -40℉ to 257℉. | Package includes: 6pcs 6an swivel hose ends (2pcs straight, 2pcs 45degree, 2pcs 90degree) and 6an braided fuel line (Length: 12 Feet). Hose ID: 0.31". Hose OD: 0.56inch. | 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉. | Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), and 6an braided fuel line (Length: 16 Feet). Hose ID: 0.34". Hose OD: 0.54inch. | EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum Working Pressure: 750psi. Bursting Pressure: 2250psi. Temperature Range: -40℉ to 257℉. | Package includes: 10pcs 6an black&red swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.31". Hose OD: 0.56inch. | 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

6AN braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line. | Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | Maximum working pressure: 750psi. Bursting pressure: 2250psi. Temperature range: -40℉ to 257℉. | Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree),2pcs 6an hose separator clamp and 6an braided fuel line (Length: 25 Feet). Hose ID: 0.31". Hose OD: 0.56inch. | 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy.

[Maximum Working Pressure] This 6an braided fuel line can stand high pressure, with long-lasting lifespan. Maximum working pressure:750psi; bursting pressure: 2250psi; temperature Range: -40℉ to 257℉. | [Material] 6an hose is made of CPE rubber inner, with a layer of 304 steel wire and nylon outer braid. | [Compatibility] The braided fuel hose can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel. | [Suitable for Widely Usage] The 6an braided fuel line is used for many purposes like for transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line and oil feed line. | [Size and Installation] Hose ID: 0.31inch ; Hose OD: 0.56inch; Length: 10 Feet. Installation instructions are included. Work with 6AN swivel hose end only.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose. | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 6AN is 9/16-18 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] Inner hole diameter: 0.63 inch (16mm). Fit for clamping and mounting 8AN fuel line. | [Material] Aluminum alloy 6061-T6. | [Function] It can use to secure and separate transmission lines to keep your project clean and organized. | [Application] Fuel hose separator clamp wildly used in fuel hose, oil line, brake line, gas line, water pipe etc. | [Note] Five sizes of hose mounting clamps available, please measure the OD of your hose before purchasing .

Size: AN6 to 1/2" NPT, the thread size of 6AN is 9/16-18 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN6 to 1/2" NPT, the thread size of 6AN is 9/16-18 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN6 to 1/4" NPT, the thread size of 6AN is 9/16-18 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN6 to 1/4" NPT, the thread size of 6AN is 9/16-18 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing: The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended.