Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability,highly optimized for general use and will give you a pleasant experience. | Idea replacements: 5 pin on-off rocker switch with spst design (single pole single throw), simple installation, freely turn on or off the light. the switches can be replaced with any defective 5 pin spst switches. | Wide Application: standard 5 Pin switch, rated at 20amp/12VDC and 10amp/24VDC, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. | DIY Stickers: Products also shipped with 1 PCS of DIY sticker and 1 PCS of night glow sticker with various patterns, can be DIY used to control any vehicle electrical appliance for your specific needs. | Package Include: 3Pcs Rocker switches, 3 sets of jumper wires, 2 Pieces of DIY stickers.

Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability,highly optimized for general use and will give you a pleasant experience. | Idea replacements: 5 pin on-off rocker switch with spst design (single pole single throw), simple installation, freely turn on or off the light. the switches can be replaced with any defective 5 pin spst switches. | Wide Application: standard 5 Pin switch, rated at 20amp/12VDC and 10amp/24VDC, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. | DIY Stickers: Products also shipped with 1 PCS of DIY sticker and 1 PCS of night glow sticker with various patterns, can be DIY used to control any vehicle electrical appliance for your specific needs. | Package Include: 3Pcs Rocker switches, 3 sets of jumper wires, 2 Pieces of DIY stickers.

Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability,highly optimized for general use and will give you a pleasant experience. | Idea replacements: 5 pin on-off rocker switch with spst design (single pole single throw), simple installation, freely turn on or off the light. the switches can be replaced with any defective 5 pin spst switches. | Wide Application: standard 5 Pin switch, rated at 20amp/12VDC and 10amp/24VDC, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. | DIY Stickers: Products also shipped with 1 PCS of DIY sticker and 1 PCS of night glow sticker with various patterns, can be DIY used to control any vehicle electrical appliance for your specific needs. | Package Include: 3Pcs Rocker switches, 3 sets of jumper wires, 2 Pieces of DIY stickers.

Material: 3" x 20' tow strap is made of upgraded polyester fiber, adopt thickening process and wear-resistant, laboratory tested to 31500lbs breaking strength. At the ends of the straps are double reinforced loops and protector sleeves. | D-Ring Shackles: Shackle adopts anti-theft design and comes with a hex Allen key. This security screw feature ensures that your cool new shackles will not get stolen or accidentally fall off during driving. | Professional Kit: Recovery strap set includes a sturdy rescue strap, 2 D-ring shackles, and a storage bag. Easy to store in your trunk, toolbox or backpack, preparing for emergencies and contingencies. | Professional Kit: Recovery strap set includes a sturdy rescue strap, 2 D-ring shackles, and a storage bag. Easy to store in your trunk, toolbox or backpack, preparing for emergencies and contingencies. | Professional Warning: The warning label on the strapt can help you better use and maintain the product.

【 UNIVERSAL D RING SHACKLES 】 - 3/4" d-ring shackles 4.75 Ton (9,500 Lbs),with a Towing Pulley, an Industry Standard 7/8" Screw Pin , and an outer nut that avoids fall. The insurance pin provides additional protection. | 【 4.75 TON CAPACITY 】 - Nilight D Ring Shackles are rated at 9,500 Lbs of Towing & Recovery Capacity for pulling or towing.Excellent addition to your recovery kit. Perfect for anyone towing or hauling vehicles or trailers. | 【 OFF-ROAD VERSATILITY 】 - The pulley works with 7/32 - 3/8” steel cable or synthetic rope to double the winch pull, distribute force and prevent winch overheating.Universal design and great for Jeeps, ATV, UTV, Trucks, Trailers, and sport-utility vehicles and for use with receiver hitch, winch snatch straps, snatch blocks, tree savers - best off road recovery accessory. | 【 D RINGS WITH ISOLATOR & WASHER 】 - Nilight heavy duty D ring are powder coated for corrosion resistance,Comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage. | 【 BEST SERVICE 】 - Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us.

30 to (3) 15/20 Amp Adapter: Allows you to connect from a 30AMP external receptacle at RV Park or Campground to a 15 AMP or 20 AMP service in or out of your RV, which quickly supplies power for the refrigerator, air conditioner, microwave oven, roaster and other 110V household appliances. This distribution adapter power cord provides an easy way to gain 3X 5-15R/5-20R receptacles from a NEMA TT-30P outlet. Allows to go directly from 30 to 15/20 amp outlets. A good choice have on the road, it gives you a option to hook 3 applicances into one power outlet. | Electrical Rating: 3 prong 30 Amp (NEMA TT-30P) male to 15/20 Amp (NEMA 5-15R/5-20R) female heavy duty power adapter. Rated for 125V and 3750W. Length 12 Inch. Constructed with 3 of 10 AWG wires to ensure the high electrical conductivity. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable.The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. Designed with LED indicator light, the LED will light up when the power is correctly and successfully connected. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | Package includes: 30AMP to (3) 15/20 AMP RV distribution adapter cord; 2 Year Warranty by Nilight.

Well Made Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment | This set of clips rivets are widely used to replace or repair fender bumper cover, front plastic fender wells, and adapt to engines front splash guard | The extruded U-nuts can be used to replace/fix to the bumper | Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details) | Package includes :10 X Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) ,15 X Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) ,10 X Plastic Push Clips as pictured

Electrical Wire Connectors: Nilight 3 Pin male and female connectors are already assembled. The wires were already crimped to the connector pins, they are sealed and soldered so that additional actions are not needed. Just connect your target wires and connect the male and female connectors together. | Superior Material: Nilight 3 pin connector is made of PA66 nylon and 16 AWG tinned copper wire., which has a certain thermo stability to make the automotive electrical connector durable and wear-resisting. The wires are pure copper instead of aluminum wire cad copper. They are tin-plated, anti corrosion and oxidation. | Easy to install: The connectors are applied with the rubber seal to make it better dustproof and waterproof. The buckle design ensures that the contact is accurately and completely inserted into the shell and prevents it from slipping out of the connector plug. The wire connectors automotive can be easily removed when needed. | Application: This item can be used for any automotive cars. It’s widely used for Motorcycles, Scooters, Cars, Trucks, Quad bikes, Trikes, Caravans, Marine Boats RVs etc. Great for connecting LED light bar, LED strips, LED wall-washers, LED underground light, LED belt light, curtain light, twinkle light and so on. The connection is reliable and safe, not loose, and light in weight. | Package Includes: 10 male ends and 10 female ends. A total of 10 pair male/female connectors.

4 Gang rocker switch aluminum panel with DIY stickers and night glow stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12V and 24VDC vehicles. | Wide Application: Universal fit for all 12V-24VDC Cars,RVs,Cans, Motorcycles, buses, boats,trailers,jeeps,UTVs,ATVs etc. | Panel Size:The aluminum panel dimension Length x Width x High(5"x2.75''x2.6'') | Quality Assurance:Made of strengthened aluminum panel and well-conductive pins ensure long lasting durability highly optimized for general use and will give you a pleasant experience | Package include:1x Pre-wired 4 gang Switch Panel,4 fixing screws,2 sets of DIY stickers.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 orange LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 purple LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Green Super Bright Spot Beam: Adopted 6pcs 3w Green led chips directly, 18w 875lm each light. Concentrated spot beam illuminates to further distance, allowing you to see the front and rear cars clearly in bad weather such as night or heavy fog, light up your night fishing, night ride or any other night activities | High Performance:Portability and versatility with a tough, aluminum cover, tough shatterproof PC , Protective cover durable to withstand for any extreme usage condition. The aluminum fan design, makes it dissipate heat more faster and effective | Adjustable Mounting Bracket:The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier. | Wide Application: Light pod is universal fit, which is perfect for compatible for almost all 4x4, Trucks, Cars, Motorcycles, SUVs, ATVs, Boats, forklift and special vehicle (fire engine, police cars, rescue vehicle, communication vehicle, and military command vehicle). It can also work great as driving light, fog light, or for emergence use | Package Included:2PCS 18W green led light bars and mounting brackets

【Super Bright Purple Light】 Adopted 6pcs 3W purple LED chips directly, -566.5nm bright purple light, 18w 790LM each pair, make your off-road journey more fun | 【High Performance】 Portability and versatility with a tough, aluminum cover, tough shatterproof PC , Protective cover durable to withstand for any extreme usage condition. The aluminum fan design, makes it dissipate heat more faster and effective | 【Adjustable Mounting Bracket】The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier | 【Wide Application】Light pod is universal fit, which is perfect for compatible for almost all 4x4, Trucks, Cars, Motorcycles, SUVs, ATVs, Boats, forklift and special vehicle | 【Package Included】2PCS 18W led light pods, a pack of mounting brackets

【 Universal D-ring Shackles】 - 1/2" d-ring shackles 2 Ton (4409 Lbs),with an Industry Standard 5/8" Screw Pin. Designed to work specifically with tow strap hooks,ideal for most car accessories. | 【 2 Ton Capacity】-This bow shackle is made of ultra strong drop forged steel and 12 Ton (26,455lbs) maximum break strength,the towing capacity is up to 2 tons (4409 Lbs), high strength. | 【 D-Ring Shackle Size】- Shackle Dia.: 13mm(1/2");Screw Pin Dia.:15mm(0.6"); Outlet Dia.: 60mm(2.36"); Inner Dia.: 33mm(1.3"). | 【 Double Safeguard 】- D Shackle has double protected for prevention rust and corrosion by galvanize & powder coat plating, it can withstands harsh weather conditions. | 【 Off-Road Versatility】 - Connects loose ends of cables, chains, straps and snatch blocks; Works perfectly with all our tow straps, snatch straps, tree savers and snatch blocks. Great for cars and other applications for tie downs, towing and recovery.

【 UNIVERSAL D RING SHACKLES 】 - 5/8" d-ring shackles 3.25 Ton (7165 Lbs),with an Industry Standard 3/4" Screw Pin. Designed to work specifically with tow strap hooks,ideal for most car accessories. | 【 3.25 TON CAPACITY 】- This bow shackle is made of ultra strong drop forged steel and 19.5 Ton (38580 Lbs) maximum break strength,the towing capacity is up to 3.25 tons (7165 Lbs), high strength. | 【 D RING SHACKLE SIZE 】- Shackle Dia.: 5/8" / 16mm; Screw Pin Dia.: 0.79" / 20mm; Outlet Dia.: 2-7/8" / 74mm; Inner Dia.: 1-5/8" / 42mm. | 【 OFF-ROAD VERSATILITY 】 - Connects loose ends of cables, chains, straps and snatch blocks; Works perfectly with all our tow straps, snatch straps, tree savers and snatch blocks. Great for cars and other applications for tie downs, towing and recovery. | 【 BEST SERVICE 】 - Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us.

【HIGHER QUALITY REPLACEMENT 】 - Replaces Honda and Acura: 91503-SZ3-003 | 【THE SAME SIZE & SHAPE AS ORIGINAL】 - Head Diameter: 20mm, Stem Length: 16mm, Fits Into 10mm Hole.These universal push-type fastener clips will fit on most of auto parts with 10mm hole, hold your parts very tightly. | 【STURDY AND DURABLE】 - Made of impact resistant nylon material, anti-wear and anti-corrosion, would not break or crack easily during use | 【WIDELY USE】 -Widely used for side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels. They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc. | 【PACKAGE INCLUDE】 - 40Pcs Fastener Rivet Clips

Upgraded Excellent Brightness: Each light is equipped with 24pcs of high brightness and better heat dissipation amber SMD LEDs. Combined with high transparency lens, to output amazing lighting effects. Significantly increases driving safety | Two Lighting Levels: Equipped with low brightness mode and high brightness mode. The low brightness can work as tail light, the high brightness can work as turn signal lights. Vehicles behind can clearly see changes in the brightness of the lights | Easy Flush Mount: Prepare a suitable hole, install grommets and lights in sequence. Then attach the 3-prong plug and connect the 3 wires lead. Hole size for mount: 4.57” in diameter, 1.89” in depth | Sealed IP67 Waterproof: Ultrasonic combined with lens and housing to form a strict sealing and waterproof design. There is no need to worry about water ingress after the back plug is plugged in tightly. It can also be perfectly applied in severe weather | Wide Application: Fit for 12V DC trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, Boats etc. Function as tail light and turn signal lights

Upgraded Excellent Brightness: Each light is equipped with 24pcs of high brightness and better heat dissipation red SMD LEDs. Combined with high transparency lens, to output amazing lighting effects. Significantly increases driving safety | Two Lighting Levels: Equipped with low brightness mode and high brightness mode. The low brightness can work as running light, the high brightness can work as stop brake light and turn signal light. Vehicles behind can clearly see changes in the brightness of the lights | Easy Flush Mount: Prepare a suitable hole, install grommets and lights in sequence. Then attach the 3-prong plug and connect the 3 wires lead. Hole size for mount: 4.57” in diameter, 1.89” in depth | Sealed IP67 Waterproof: Ultrasonic combined with lens and housing to form a strict sealing and waterproof design. There is no need to worry about water ingress after the back plug is plugged in tightly. It can also be perfectly applied in severe weather | Wide Application: Fit for 12V DC trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, Boats etc. Function as running/stop/brake/turn/tail light

Upgraded Excellent Brightness: Each light is equipped with 24pcs of high brightness and better heat dissipation white SMD LEDs. Combined with high transparency lens, to output amazing lighting effects. Significantly increases driving safety | Two Lighting Levels: Equipped with low brightness mode and high brightness mode. The low brightness can work as parking/tail light, the high brightness can work as back up reverse lights. Vehicles behind can clearly see changes in the brightness of the lights | Easy Flush Mount: Prepare a suitable hole, install grommets and lights in sequence. Then attach the 3-prong plug and connect the 3 wires lead. Hole size for mount: 4.57” in diameter, 1.89” in depth | Sealed IP67 Waterproof: Ultrasonic combined with lens and housing to form a strict sealing and waterproof design. There is no need to worry about water ingress after the back plug is plugged in tightly. It can also be perfectly applied in severe weather | Wide Application: Fit for 12V DC trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, Boats etc. Function as parking light, tail light and back up reverse lights

Upgraded Excellent Brightness: Each light is equipped with 24pcs of high brightness and better heat dissipation red/white SMD LEDs. Combined with high transparency lens, to output amazing lighting effects. Significantly increases driving safety | Two Lighting Levels: Equipped with low brightness mode and high brightness mode. The low brightness can work as Tail light, the high brightness can work as stop brake light, turn signal light and back up reverse lights. Vehicles behind can clearly see changes in the brightness of the lights | Easy Flush Mount: Prepare a suitable hole, install grommets and lights in sequence. Then attach the 3-prong plug and connect the 3 wires lead. Hole size for mount: 4.57” in diameter, 1.89” in depth | Sealed IP67 Waterproof: Ultrasonic combined with lens and housing to form a strict sealing and waterproof design. There is no need to worry about water ingress after the back plug is plugged in tightly. It can also be perfectly applied in severe weather | Wide Application: Fit for 12V DC trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, Boats etc. Function as stop/brake/turn/reverse/tail light

Upgraded LED: Each light is composed of 12PCS upgrade high-quality 3030 SMD LED chips, features wider lighting angle, and better heat dissipation. Output 3 time brighter light than others. High brightness for Turn Signals light, low brightness for Tail light | Easy Installation: First, successively install the rubber grommet, round taillight with 3-prong plug onto the bracket. Then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. Last connect the 3 wires to the corresponding wires on vehicles. Round hole diameter is 0.39” | Upgraded Unique Design: Upgrade notches on the inside of grommet, three bulges are added to create a tighter attaching ability between the grommet and taillight. These help the taillight not fall out, and can be firmly fixed on the mounting bracket with grommet. 3-prong plug also attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires | Durable For Weather: The round taillight is highly silicone sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. The mounting bracket is a durable metal coated with high-quality black powder. It is not easy to lose paint and rust | xtensive Application: Universal fit for DC 12V system, function as turn signals light and tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, Boat, special vehicle, etc. Just make sure the hole size before you purchase

Upgraded LED: Each light is composed of 12PCS upgrade high-quality 3030 SMD LED chips, features wider lighting angle, and better heat dissipation. Output 3 time brighter light than others. High brightness for Reverse/Back Up light, low brightness for Tail light | Easy Installation: First, successively install the rubber grommet, round taillight with 3-prong plug onto the bracket. Then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. Last connect the 3 wires to the corresponding wires on vehicles. Round hole diameter is 0.39” | Upgraded Unique Design: Upgrade notches on the inside of grommet, three bulges are added to create a tighter attaching ability between the grommet and taillight. These help the taillight not fall out, and can be firmly fixed on the mounting bracket with grommet. 3-prong plug also attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires | Durable For Weather: The round taillight is highly silicone sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. The mounting bracket is a durable metal coated with high-quality black powder. It is not easy to lose paint and rust | Extensive Application: Universal fit for DC 12V system, function as reverse/back up light and tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, Boat, special vehicle, etc. Just make sure the hole size before you purchase

Upgraded LED: Each light is composed of 12PCS upgrade high-quality LEDs, features wider lighting angle, and better heat dissipation. Create higher brightness and longer lifetime. | Stand Out Brightness: Output 3 time brighter light than others. High brightness for Turn/Brake light, low brightness for Tail light. Improve visibility and ensure you a safer night. | Easy Installation: Just three steps. surface mount the grommets & light setup, attach the 3-prong plug to light, and then connect the 3 wires lead. Hole size for surface mount is: 4. 46” diameter hole, 1.87” depth. | Durable For Weather: Highly silicone sealed and IP67 waterproof rate, resistant to water intrusion, durable with any season and weather. | Wide Application: Work on 12V DC system, function as turn/brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase.

Upgraded LED: Each light is composed of 12PCS upgrade high-quality LEDs, features wider lighting angle, and better heat dissipation. Create higher brightness and longer lifetime. | Stand Out Brightness: Output 3 time brighter light than others. High brightness for Turn/Brake/Reverse light, low brightness for Tail light. Improve visibility and ensure you a safer night | Easy Installation: Just three steps. surface mount the grommets & light setup, attach the 3-prong plug to light, and then connect the 3 wires lead. Hole size for surface mount is: 4. 46” diameter hole, 1.87” depth | Durable For Weather: Highly silicone sealed and IP67 waterproof rate, resistant to water intrusion, durable with any season and weather | Wide Application: Work on 12V DC system, function as turn/brake/reverse light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase

Specification: 30A@12VDC; 15A@24VDC; 30A@125VAC; 15A@250VAC, this reverse polarity switch can be used under DC and AC circuits. | Usage: The DC motor will reverse the motor direction with switch when hooked red to + VDC and Black to - VDC, and Blue to the Motor. It is configured for polarity reversing. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. | Switch Type: on off on Momentary. The switch lever will return to the middle off position when release your finger. Cut-out/hole size: 12mm. | Widely Used: This polarity reversing switch replacement for most RVs, trailers, car, ATVs, UTVs boats etc. The switch is designed with jumper bars for polarity reversing, connecting power and ground, and two DC motor leads and the switch will reverse the motor direction. | Product package: Reverse Polarity Toggle Switch*2, 14 gauge wires*8, Waterproof Cap*2, 2 Year Warranty by Nilight.

This adapter converts 4 way flat vehicle end to 7 way blade trailer end, makes a tight connection between vehicle socket and trailer plug, no wiggle-room, no loose fittings. Transfers the power from the vehicle to trailer. Voltage ranges: 6-24 Volts | 4-pin flat socket designed to be converted to the 7-pin blade round type socket. Works on most vehicle wiring components like turn signals, brakes, reverse light and auxiliary power. | Heavy duty black plastic construction prevents rusting, enhances appearance. Well sealed spring loaded cover increases protection against dust, moisture and corrosion. | Wide Application: Suitable for most trailers, semitrailers, caravans, RV. Commonly used with T-connectors or tail lamp converters with 4-way flat car end connections | Package include: 1x Trailer Adapter Plug, 1xMounting bracket 6 screws and 6 nuts

5 Gang rocker switch aluminum panel with DIY stickers and night glow stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12V and 24VDC vehicles. | Wide Application: Universal fit for all 12V-24VDC Cars,RVs,Cans, Motorcycles, buses, boats,trailers,jeeps,UTVs,ATVs etc. | Panel Size:The aluminum panel dimension Length x Width x High(6"'x2.75''x2.6'') | Quality Assurance:Made of strengthened aluminum panel and well-conductive pins ensure long lasting durability highly optimized for general use and will give you a pleasant experience | Package include:1x Pre-wired 5 gang Switch Panel,4 fixing screws,2 sets of DIY stickers.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 orange LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 purple LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Connector type: DPDT, 6 terminal pin on/off/on. Power: 15A 250VAC/20A 125VAC , 1/2" mounting hole. | Material: plastic and metal. Solid connection switch with waterproof rubber cap, more convenient to operate. Delicate appearance with strong Construction. Look chic and high-end on your equipment | Mechanical life: more than 50. 000 cycles. Electrical life: more than 10, 000 cycles | Easy to install: Mounting hole diameter: O12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered | Package include: 5Pcs toggle switch, 5Pcs waterproof boot cap

Simply Your Wire Harness: 7-way copper blade molded into a heavy duty plug, provides a fast and simplified way for wires connection as well as keeping all your trailer wiring in order. | Durable Construction and Flexible Connection: 8ft long cord with soft and durable PVC housing providing a flexible connection. The length prevents it from being strained during an emergency turn. Also Weatherproof and corrosion-resistant for a longer lifespan. | Versatile Applications: Perfect for connecting tail, brake, reverse, turn signals and auxiliary power of your trailers, RVs, campers, caravans, food vans and other towed vehicles. Please read the diagram carefully before any operations on the product | Convenient Wiring: 7 colours coded wires and coated with durable rubber-like insulation, ready to be installed into a junction box | Package include: 1x 8 ft. 7-Way trailer plug and a diagram | fit type: Universal

Function: Green LED toggle switch with 3 Pin blade type terminals, SPST design(single pole single throw), Rated at 30A 12V DC and 15A 24V DC. Mounting hole size is 0.47 inches (12mm). | Green LED Indicator: When our LED toggle switch is turned on, it will emit a bright Green light, allowing you to easily find its position at night. | Excellent Quality: The terminal uses a silver-plated terminal, and the body uses metal retardant material. | Wide Application: Suitable for installing in any 12V motorized vehicles such as cars, trucks, boats, ATVs, UTVs, RVs,motorhomes, racecars or any off road vehicles. Widely used for controlling LED lights, fog lights, underglow lights etc. | Package Includes: 5 PCS Green LED toggle switches with Green LED indicator, a wiring diagram

Function: Red LED toggle switch with 3 Pin blade type terminals, SPST design(single pole single throw), Rated at 30A 12V DC and 15A 24V DC. Mounting hole size is 0.47 inches (12mm). | Red LED Indicator: When our LED toggle switch is turned on, it will emit a bright red light, allowing you to easily find its position at night. | Excellent Quality: The terminal uses a silver-plated terminal, and the body uses metal retardant material. | Wide Application: Suitable for installing in any 12V motorized vehicles such as cars, trucks, boats, ATVs, UTVs, RVs,motorhomes, racecars or any off road vehicles. Widely used for controlling LED lights, fog lights, underglow lights etc. | Package Includes: 5 PCS Red LED toggle switches with Red LED indicator, a wiring diagram

Multifunction switch panel 6 on/off 5pin blue LED rocker switch 6 circuit breakers for overload protection 12 volt cigarette socket 5V/2 1A & 5V/1A dual USB charger port and digital voltmeter great for all types of circuit control charging needs and voltage monitoring | Pre wired switch panel with wiring instructions mounting screws and a multi-function stickers for DIY your specific need | Short circuit/overheat protection built in overload protection suitable for most DC 12V-24V cars UTV/ATV trucks trailer RV caravan bus marine boat yacht airplane etc. | Perfect for your machine heavy duty ABS plastic face panel all-in-one design can be DIY-used to control any vehicle electrical appliance | Package include 6 gang toggle rocker switch panel and DIY sticker | Fit type universal fit

6 Gang rocker switch aluminum panel with DIY stickers and night glow stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12V and 24VDC vehicles. | Wide Application: Universal fit for all 12V-24VDC Cars,RVs,Cans, Motorcycles, buses, boats,trailers,jeeps,UTVs,ATVs etc. | Panel Size:The aluminum panel dimension Length x Width x High(7"'x2.75''x2.6'') | Quality Assurance:Made of strengthened aluminum panel and well-conductive pins ensure long lasting durability highly optimized for general use and will give you a pleasant experience | Package include:1x Pre-wired 6 gang Switch Panel,4 fixing screws,2 sets of DIY stickers.

6 Gang rocker switch aluminum panel with DIY stickers and night glow stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12V and 24VDC vehicles. | Wide Application: Universal fit for all 12V-24VDC Cars,RVs,Cans, Motorcycles, buses, boats,trailers,jeeps,UTVs,ATVs etc. | Panel Size:The aluminum panel dimension Length x Width x High(7"'x2.75''x2.6'') | Quality Assurance:Made of strengthened aluminum panel and well-conductive pins ensure long lasting durability highly optimized for general use and will give you a pleasant experience | Package include:1x Pre-wired 6 gang Switch Panel,4 fixing screws,2 sets of DIY stickers.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 purple LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Awesome Brightness: Each tail light has 23 PCS LED chips to output two levels of ultra bright red light and one level of amber light. Low brightness red light for running light, high brightness red light for stop brake lights, and amber light for left right turn signals light. Improving visibility and ensuring you a safer night | Quick installation: First, successively install the rubber grommet, oval taillight with 3 wires. Then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. Last connect the 3 wires to the corresponding wires on vehicles | Upgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet. These help the light and grommet fit perfectly and firmly on mounting bracket, and the 3 wires attaches tightly onto the light. Shake proof, there will be no worries of loosing light or wires | Ready For The Weather: The oval taillight is highly silicone sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. The mounting bracket is a durable metal coated with high-quality black powder. It is not easy to lose paint and rust | Extensive Application: Universal fit for DC 12V system, function as stop brake light, left right turn signals light and tail light for all kinds of trucks, trailers, tractors, Boat, luggage rack, special vehicle, etc. Just make sure the hole size before you purchase

【Super Bright】Each trailer tail light is equipped with 10PCS high-quality 3030 LED chips to output super bright amber light, high brightness of left and right turn signal light, low brightness for Taillight, providing maximum visibility and safety. Compared with halogen bulb, LEDs have the characteristics of fast light emission, low energy consumption, and high brightness. | 【Ready For The Weather】Made of high-quality ABS and PC lens, using ultrasonic welding technology to ensure waterproof, shock-proof and dust-proof sealing. Everything we do is to make it easier for you to cope with the complicated climatic environment. | 【Easy to Install】White Wire - ground, Red wire - high brightness for left and right turn signal light, Black wire - low brightness for tail light. With 8 self-tapping screws, just use a gundrill, screwdriver or other tools to mount to metal. Note: This is NOT plug and play type wire harness, is hard wired. | 【Wide Applications】Can be used as tail light, turn signal, stop light, side marker light, clearance light, rear light. Ideal for most 12V vehicles and devices such as trucks, trailers, bus, RV, pickup, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump truck, etc. | 【Package Include】2 pcs 6" oval tail light, 8 self-tapping screws

【Super Bright】Each trailer tail light is equipped with 10PCS high-quality 3030 LED chips to output super bright red light, high brightness for turn or brake light, reverse light, low brightness for tail light, providing maximum visibility and safety. Compared with halogen bulb, LEDs have the characteristics of fast light emission, low energy consumption, and high brightness | 【Ready For The Weather】Made of high-quality ABS and PC lens, using ultrasonic welding technology to ensure waterproof, shock-proof and dust-proof sealing. Everything we do is to make it easier for you to cope with the complicated climatic environment | 【Easy to Install】White Wire - ground, Red wire - high brightness for brake or stop light, Black wire - low brightness for tail or running light. With 24 self-tapping screws, just use a gundrill, screwdriver or other tools to mount to metal. Note: This is NOT plug and play type wire harness, is hard wired | 【Wide Applications】Can be used as tail light, turn signal, stop light, reverse light, back-up light, side marker light, clearance light, rear light. Ideal for most 12V vehicles and devices such as trucks, trailers, bus, RV, pickup, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump truck, etc | 【Package Include】6 pcs 6" oval tail light, 24 self-tapping screws