HEAVY DUTY CONSTRUCTION: Our front bumper is manufactured from heavy duty 5/32" steel sheet and 2"X0. 120" steel tubing for superior strength and durability, Give your car a tougher look &360° Protection. | PERFECT FITMENT: Fit for 87-06 Jeep Wrangler TJ & YJ. High accuracy laser measuring and cutting ensure that the bumper has a correct 360° fit. original vehicle Mould, More Precision. | PERFECT FOR OFF-ROAD USE: Featuring 2X Nilight 18W LED Lights two high strength D-Ring mounts and built-in winch plate this Nilight Rear Bumper is perfect for off-road use. | EASY, BOLT-ON INSTALLTION:This Nilight Mid Width Rear Bumper is also designed with ease of use and installation in mind. Thanks to its convenient bolt-on solution, this bumper installs quickly and easily without requiring any modification to your vehicle. | BEST SERVICE: Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us. | Fit type: Universal Fit

【 ADVENTURE STYLING 】- Nilight Front Bumper will add exciting off-road styling to your 2018-2019 JL Wrangler. Designed with the adventurous off-roader in mind, this Bumper features a built-in winch plate that is capable of supporting a 12, 000 lb. winch. Additional features 1X 72W Nilight LED light bar + 2 x 18W Nilight Spot Cube LED Work Light Pod. Loaded with all these great features, this Nilight Front Bumper is ideal for both on and off road use | 【 LIGHT UP THE NIGHT 】- The Nilight Front Bumper is the perfect solution for night-time trail runners, as it features 1X 72W Nilight LED light bar + 2 x 18W Nilight Spot Cube LED Work Light Pod to ensure complete confidence in any night time adventure | 【 HEAVY DUTY CONSTRUCTION 】 - Our front bumper is manufactured from heavy duty 5/32" steel sheet and 2"X0. 120" steel tubing for superior strength and durability, Give your car a tougher look &360° Protection. | 【 NEVER RUST 】- Two-stage textured black powder coating finish and laser welding procedure, better prevent rust | 【 BEST SERVICE】 - Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us.

Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit | Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting | Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box | Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity | Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse

Easy to install and use: 7 pin on off on rocker switch with DPDT design (double pole double Throw), rated at 20AMP/12VDC and 10AMP/24VDC. Can be installed or replaced on the original rocker switch panels. It is easy and simple to set up. Can control 2 loads. | Wide Applications: Universal fit for all cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Marine boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans etc; Mainly used to control the high low beam of the headlights, taillights and auxiliary lamps, etc. | Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience. | Multiple Security Protection: Output circuit protection, overload protection, reverse polarity protection. Built in two premium LEDs, the highly luminous LED allows for clear visibility at night, Safer and more convenient to use. | Package Includes: A 7 PIN HIGH/LOW switch, jumper wires set and a wiring diagram.

easy to install and use: 5 pin on-off rocker switch with spst design (single pole single throw), simple installation, freely turn on or off | cool illuminated light: built-in two premium leds emits soft light to illuminate the patterns, easy for you to find the switch in the dark | sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away | wide application: standard 5 pin switch, rated at dc 12v/20amp and dc 24v/10amp, fits for most cars, suvs, atvs, utvs, 4x4, trucks, jeep wranglers, boats, yachts and other vehicles. | package included : 1x 5 pin rocker switch, 1x jumper wires set, 1x diagram. 2 Year Warranty by Nilight.

Heavy-duty bracket: High-quality aluminum alloy material and advanced production process, The mounting bracket is impact resistant and anti-corrosion | Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 sets of mounting holes on top and 1 set in front | Easy installation: No drill, no modification required, just like to replace a license plate using its mount location, usually can be installed in 20 minutes | Universal fitment: Fits for almost all cars, jeep, truck, pickup, SUV, 4x4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars | Package includes: 1Pc front license plate mounting bracket

Heavy-duty bracket: High-quality aluminum alloy material and advanced production process, The mounting bracket is impact resistant and anti-corrosion | Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 sets of mounting holes on top and 1 set in front | Easy installation: No drill, no modification required, just like to replace a license plate using

Brightness: Powerful 120 watts LED light bar, high-quality Led chips and clear PC lens, this LED pod emits 6000k pure white light, effectively light up the dark road during night | Combo beam: Appropriate combination of spot beam and flood beam for wide spread and further distance illumination; | Sliding mounting bracket: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain | Waterproof rate: IP67 rate, seamless protective housing with waterproof glue, great performance of waterproof, dustproof and quakeproof; | Better heat dissipation: Special designed 6063 Aluminum profile with thermal grease can improve the heat dissipation ability | Fit type: Universal fit

Easy to install and use: 7PIN (ON)-OFF-(ON) rocker switch with DPDT design (double pole double Throw), rated at 20AMP/12VDC and 10AMP/24VDC. Can be installed or replaced on the Nilight rocker switch panels. It is easy and simple to set up. Can control 2 loads. | Dual Operation: This momentary electrical system switch is used for jogging or inching operations. A DPDT switch is equivalent to two SPDT switches. It routes two separate circuits. Connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which two contact can be routed. Always make sure you are using a switch and wire sufficient to handle the load you are carrying. In higher draw applications, a relay may be needed. | Wide Application: Can be used to replace Rotary, Drum, Cable and used to control Winch,Pump,Reclining Media Room Seats,Auto Bilge Pump. Fit for all cars, SUVs, ATVs, UTVs, Yachts, Trailers,Campers, Caravans etc; Also a great replacement for RV or Electric Trailer Power, Travel Trailers and slideout Power awning switches. Momentary Automatic Reset action, Resetting returns to off when released. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction | Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability,highly optimized for general use and will give you a pleasant experience. | Package Includes: A 7 PIN switch,jumper wires set and a wiring diagram.

【Small but Bright】Equipped with 4pcs high power SMD LEDs per light, mini size but much brighter than halogen bulbs, makes it more noticeable when driving to increase safety, also enhances the look of your motorcycle to more modern, stylish, and functional | 【Excellent Quality】Made of matt black painting aluminum alloy shell and high-quality glass lens, not easy to corrosion or scratch, fully sealed on the edge, with good water resistance, ideal for outdoor use | 【Easy Installation】If your original blinker has 8mm mounting bolts, just remove the original one and then replace the new light; if no suitable hols, please drill an 8mm hole where you to mount the new turn signals to DIY your motorcycle | 【Wide Compatibility】Universal fit for 12V DC motorcycles, motorbikes scooter Scooter Quad Cruiser Off Road Street Bike Cafe Race and other motorcycles with 8mm mounting bolt | 【Tips】Most models have LED compatible turn signal relay, but for a few special models (old models) need Load Resistor to help the signal flash

【Small but Bright】Equipped with 4pcs high power SMD LEDs per light, mini size but much brighter than halogen bulbs, makes it more noticeable when driving to increase safety, also enhances the look of your motorcycle to more modern, stylish, and functional | 【Excellent Quality】Made of matt black painting aluminum alloy shell and high-quality glass lens, not easy to corrosion or scratch, fully sealed on the edge, with good water resistance, ideal for outdoor use | 【Easy Installation】If your original blinker has 8mm mounting bolts, just remove the original one and then replace the new light; if no suitable hols, please drill an 8mm hole where you to mount the new turn signals to DIY your motorcycle | 【Wide Compatibility】Universal fit for 12V DC motorcycles, motorbikes scooter Scooter Quad Cruiser Off Road Street Bike Cafe Race and other motorcycles with 8mm mounting bolt | 【Tips】Most models have LED compatible turn signal relay, but for a few special models (old models) need Load Resistor to help the signal flash

HEAVY DUTY WIRE: High-quality materials, durable in use, easily extend your 12V- 24V DC power source when travelling | PREMIUM QUALITY: Good electrical conductivity, high temperature and melting resistant, outstanding bending performance | PLUG AND PLAY: Easy to connect the male plug to cigarette lighter and female plug to electrical appliances | SAFETY PROTECTION: The built-in fuse can efficiently protect against overcurrent and short circuit | PACKAGE INCLUDE: 1PC Cigarette Lighter Extension Cord

HEAVY-DUTY REAR PROTECTION: - This Bumper was designed to add protection to your precious Jeep’s lower rear end while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style. | QUALITY TIRE CARRIER : - With the Nilight Tire Carrier you'll experience smooth opening and closing operation because of the twin tapered bearing axle design. This Tire Carrier also features adjustable mounting positions, so it can accommodate Up to a 37" Tire. | PERFECT FOR OFF-ROAD USE: - Featuring a 2" standard hitch receiver, two high strength D-Ring mounts and a spare tire carrier, the Nilight Rear Bumper w/ Tire Carrier is perfect for off-road use. | BOLT-ON INSTALLATION : - This Nilight Rear Bumper installs easily. No modifications are required to complete the basic installation process, however, some mechanical experience is helpful. | BEST SERVICE: - Buy At Nilight , You Earn What You Buy! We offer 2 Years Nilight and Lifetime Best Customer Service . If you have any questions or problems, please contact us.

Specification: 20A@12VDC; 10A@24VDC; 20A@125VAC; 10A@250VAC, this reverse polarity switch is double-pole double-throw features to control two circuits and can be used under DC and AC circuits | Product Type: The power jack switch has built-in jumper bars for polarity reversing. Just simply connect to the battery and DC motor, then this switch can reverse the motor direction without changing the wiring | Material: Switch is made of plastic and metal.Terminals are made of brass, silver plated. Electrical life:>10000 cycles. Mechanical life: >50000 cycles | Widely Used: This RET/EXT switch replacement is for most RVs, trailers, cars, ATVs, UTVs, and boats. Designed for large appliances like awnings, electric Stabilizer Jack, and more. can be used in both home equipment and factory equipment, with excellent quality and simple installation | Product Included: RET/EXT Reverse Polarity Toggle Switch*2, Jumper Wires*8

Ultra Brightness & Wide Angle: Contains 18 pcs bright and durable 5050 SMD LEDs. With the wider angle design, make the illumination range wider and the lighting performance better. Includes 16 million static colors to choose, making it easy to customize your favorite colors | Choose Your Modes: Our RGB rock lights delivers 29 lighting modes (monochrome/ jump/ flashing/ breathing) and 4 different scene modes (party/casual/quiet/lunch break), allowing you to freely set the lighting mode that suits you and your preferences. You can also use the timer function to achieve the timed switch of the light. At the same time, it can synchronize with the microphone and music, making your driving more brilliant | Quality Materials & Waterproof: Using an aluminum base can effectively and quickly dissipate heat, no longer troubled by heat. Durable and sturdy PC lens is wear-resistant, scratch resistant, and not easily damaged. The combination of PC lens and aluminum base sealing makes the rock light achieve IP67 waterproof, which can also be used in harsh weather conditions | Few Minutes To Install: Come with sponge pads and hardware. Two type of hardware suitable with different areas. Firstly, place the light on the pads, then mount lights on the position. Secondly, connect the plugs one by one. Finally connect the power wires to the power supply. Control box can stick in the appropriate position with double side tape | Multiple Control Methods: The rock light can be controlled with buttons, remotes and APP. The RF and IR remote can easy to carry and control, adjust the color/brightness/modes. Avoid interference from others' remote controls by setting your rock lights into one-to-one remote control mode (Note: See guidelines on the user manual). On the basis of the remotes functions, the Bluetooth APP can syn-with with music and microphone modes, group more devices, and timing

Ultra Brightness & Wide Angle: Contains 18 pcs bright and durable 5050 SMD LEDs. With the wider angle design, make the illumination range wider and the lighting performance better. Includes 16 million static colors to choose, making it easy to customize your favorite colors | Choose Your Modes: Our RGB rock lights delivers 29 lighting modes (monochrome/ jump/ flashing/ breathing) and 4 different scene modes (party/casual/quiet/lunch break), allowing you to freely set the lighting mode that suits you and your preferences. You can also use the timer function to achieve the timed switch of the light. At the same time, it can synchronize with the microphone and music, making your driving more brilliant | Quality Materials & Waterproof: Using an aluminum base can effectively and quickly dissipate heat, no longer troubled by heat. Durable and sturdy PC lens is wear-resistant, scratch resistant, and not easily damaged. The combination of PC lens and aluminum base sealing makes the rock light achieve IP67 waterproof, which can also be used in harsh weather conditions | Few Minutes To Install: Come with sponge pads and hardware. Two type of hardware suitable with different areas. Firstly, place the light on the pads, then mount lights on the position. Secondly, connect the plugs one by one. Finally connect the power wires to the power supply. Control box can stick in the appropriate position with double side tape | Multiple Control Methods: The rock light can be controlled with buttons, remotes and APP. The RF and IR remote can easy to carry and control, adjust the color/brightness/modes. Avoid interference from others' remote controls by setting your rock lights into one-to-one remote control mode (Note: See guidelines on the user manual). On the basis of the remotes functions, the Bluetooth APP can syn-with with music and microphone modes, group more devices, and timing

Ultra Brightness & Wide Angle: Contains 18 pcs bright and durable 5050 SMD LEDs. With the wider angle design, make the illumination range wider and the lighting performance better. Includes 16 million static colors to choose, making it easy to customize your favorite colors | Choose Your Modes: Our RGB rock lights delivers 29 lighting modes (monochrome/ jump/ flashing/ breathing) and 4 different scene modes (party/casual/quiet/lunch break), allowing you to freely set the lighting mode that suits you and your preferences. You can also use the timer function to achieve the timed switch of the light. At the same time, it can synchronize with the microphone and music, making your driving more brilliant | Quality Materials & Waterproof: Using an aluminum base can effectively and quickly dissipate heat, no longer troubled by heat. Durable and sturdy PC lens is wear-resistant, scratch resistant, and not easily damaged. The combination of PC lens and aluminum base sealing makes the rock light achieve IP67 waterproof, which can also be used in harsh weather conditions | Few Minutes To Install: Come with sponge pads and hardware. Two type of hardware suitable with different areas. Firstly, place the light on the pads, then mount lights on the position. Secondly, connect the plugs one by one. Finally connect the power wires to the power supply. Control box can stick in the appropriate position with double side tape | Multiple Control Methods: The rock light can be controlled with buttons, remotes and APP. The RF and IR remote can easy to carry and control, adjust the color/brightness/modes. Avoid interference from others' remote controls by setting your rock lights into one-to-one remote control mode (Note: See guidelines on the user manual). On the basis of the remotes functions, the Bluetooth APP can syn-with with music and microphone modes, group more devices, and timing

【Top bright & durable】Employing quality led chips, each light pod outputs 10-14 watts top bright and high intensity RGB colors for exterior truck lighting. Also features of ip68 waterproof and premium aluminum constructed, ensures it a higher performance and a longer lifetime at 50,000 hours | 【Define your style with music mode】 Offers marvelous lighting modes for your options, include millions of different colors with brightness adjustment, 20 modes of flashing & strobing with speed adjustment, sync with the music rhythm, voice response, and timing function. Add on more fun on your ride | 【Bluetooth Controlled】Upgraded smaller controller box for less space and easier installation. Compatible with ios7. 0 android 4.3 above system. Just download app -quick open Bluetooth on your phone and connect devices in app-and then restart “on” button to freely control light and using all functions without errors or bugs | 【Extremely Easy Installation】Based on the mounting position, choose either flat or round/bull bar rubber pad to get lights seated on and mount to the position; then plug and play lights to the 8 way splitter controller wires and fix controller box to a position not overheated; lastly connect controller box to power. (note: connect to a switch first instead directly to battery to avoid drainage) | 【Wide applications】Operating voltage 9-32v DC, can be generally used as exterior bed light, wheel well light on truck, ATV, utv, rzr, SUV, buggy, motorbike, Raptor, ranger, jeep and boat motorcycle etc. Add on both style and safety

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling Fog Lights, LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram. 2 Year Warranty by Nilight.

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away | Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package includes: 1x 5 pin rocker switch, 1x jumper wires set, 1x wiring diagrams.

RV Electric Stabilizer Jack Switch：Heavy duty DPDT reverse polarity switch resetting automatically (returns to off) when released. This rv electric jack switch is designed to automatically and effortlessly lower and raise your RV's stabilizer jacks. Compared with manually operating the jacks, it will greatly save your time and energy, allows you to stabilize your RV in the shortest time and enjoy a wonderful RV travel with your family. | High Performance: This power stabilizer switch is made of high-temperature resistance durable materials and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience. Also, it has a sealed back to better protect the internal components from dirt, dust, and rain. Good weather resistant unit to withstand hard conditions. | Wide range of application: Controls the up/down, clockwise/counterclockwise motion of DC loads (e.g. motors, hoists, cranes, linear actuators etc.). Fit for lipper ligh speed power stabilizer jacks. Fit for the motor control switch in the rear landing leg for the RV or fifth wheel or stabilizer jack LC298707, LC198641 or LC 363284, ect. Suitable for RV, Camper, Caravan, Motorhome, Van, Trailer, etc. | Easy Installation and Operation: Just do-it-yourself! The power stabilizer switch kit includes an extended/retracting switch assembly and wiring harness, as well as the mounting screws, you don’t need to purchase the additional part for installation. The switch is labeled with "EXTEND" and "RETRACT", provides a simple rocker-style operation. You can conveniently extend and retract your stabilizer jack at the push of a button. | Package Includes: A stabilizer jack switch, 4×mounting screws, wiring diagram.

30 to 50 Amp Adapter: Allows you to connect on the 30 AMP 3 prong female plug on the electric generator, or a 30 AMP external receptacle at RV Park or Campground to a 30 AMP service on your RV, which quickly supplies power for the refrigerator, air conditioner, microwave oven, roaster and other household appliances. | Electrical Rating: 30 Amp (NEMA L5-30P) male to 30 Amp (NEMA 14-50R) female heavy duty generator adapter cord. Rated for 125V and 3750W . Length 14.6 Inch. Constructed with 3 of 10 AWG wires to ensure the high electrical conductivity. Male connector is constructed with pressure-proof twist locking design. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable.The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | Package includes: 3 prong 30AMP to 50AMP RV generator adapter cord.

30 to 30Amp Adapter: Allows you to simply convert the house power when you only have a 30A interface on your RV, quickly supply power for low power electrical appliance and keep batteries charged during storage.Female connector comes with a locking thread ring for adjustment and weatherproof. | Electrical Rating: 30 Amp (NEMA TT-30P) male to 30 Amp (NEMA L5-30R) female heavy duty power adapter. Rated for 125 and 3750W . Length 13.8 Inch. Constructed with 3 of 10 AWG wires to ensure the high electrical conductivity. | ETL Certified: Our RV locking adapter cord has been tested at an ETL laboratory and found to meet all applicable Standards for Safety published by relevant NRTLs. ETL certification follows the same safety standards as Underwriter Laboratories or UL. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable.The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | Package includes: 30AMP to 30AMP RV Locking adapter cord.

30 to 50Amp Adapter: Allows you to simply convert the house power when you only have a 50A interface on your RV, quickly supply power for low power electrical appliance and keep batteries charged during storage.Female connector comes with a locking thread ring for adjustment and weatherproof. | Electrical Rating: 30 Amp (NEMA TT-30P) male to 50 Amp (NEMA SS2-50R) female heavy duty power adapter. Rated for 125V and 3750W . Length 14.6 Inch. Constructed with 3 of 10 AWG wires to ensure the high electrical conductivity. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable.The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | Package includes: 30AMP to 50AMP RV Locking adapter cord.

15A to 30A Adapter: Allows you to Plug in your 30A RV while home or somewhere else has a 110V AC 15Amp receptacle, which quickly supplies power for the refrigerator, air conditioner, microwave oven, roaster and other household appliances. Available to keep the batteries charged and it's the best adapter for all RVs running 30 amps. | Electrical Rating: 15 Amp (NEMA 5-15P) male to 30 Amp (NEMA TT-30R) female heavy duty power adapter. Rated for 125V and 1875W . Length 13.8 Inch. Constructed with 3 of 10 AWG wires to ensure the high electrical conductivity. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable.The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | ETL Certified: Our RV power adapter cord has been tested at an ETL laboratory and found to meet all applicable Standards for Safety published by relevant NRTLs. ETL certification follows the same safety standards as Underwriter Laboratories or UL. | Package includes: 15AMP to 30AMP RV power adapter cord.

30 to 15Amp Adapter: Allows you to connect from a 30AMP external receptacle at RV Park or Campground to a 15 AMP service on your RV, which quickly supplies power for the refrigerator, air conditioner, microwave oven, roaster and other household appliances. Best adapter for all RVs running 15 amps | Electrical Rating: 30 Amp (NEMA TT-30P) male to 15 Amp (NEMA 5-15R ) female heavy duty power adapter. Rated for 125V and 3750W . Length 13.6 Inch. Constructed with 3 of 10 AWG wires to ensure the high electrical conductivity. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable.The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | ETL Certified: Our RV power adapter cord has been tested at an ETL laboratory and found to meet all applicable Standards for Safety published by relevant NRTLs. ETL certification follows the same safety standards as Underwriter Laboratories or UL. | Package includes: 30 AMP to 15 AMP RV power adapter cord.

Excellent Towing Power: Shackle Hitch Receiver Set was made of high-strength drop forged steel, with a rated working load of 11,000 LBs and a breakpoint of 45,000 LBs, over double the weight of standard truck | Heavy Duty and Solid: Made of Heavy Duty Drop Forged Steel, with powder coated and electro-galvanized providing durable and strong protection against the hardest of conditions | Wide-Application: The Shackle Hitch Receiver fits all standard 2" tow receivers, and the dual hitch cross drilled pin holes can be flexible to connect the D-Ring horizontally or vertically, you can flip it sideways for towing (and other purposes), provide extensive recovery anchor point options | D-Ring With Isolator &Washer: D-Ring are powder coated for corrosion resistance, and comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage | Package Includes: 2" Shackle Hitch Receiver, 5/8" Trailer Hitch Pin, 3/4" D-ring Shackle with Shackle Isolator & 2PCs Washers kits, protect the bumper from scratches and rattling

Excellent Towing Power: Shackle Hitch Receiver Set was made of high-strength drop forged steel, with a rated working load of 11,000 LBs and a breakpoint of 45,000 LBs, over double the weight of standard truck | Heavy Duty and Solid: Made of Heavy Duty Drop Forged Steel, with powder coated and electro-galvanized providing durable and strong protection against the hardest of conditions | Wide-Application: The Shackle Hitch Receiver fits all standard 2" tow receivers, and the dual hitch pin holes can be flexible to connect the D-Ring horizontally or vertically provide extensive recovery anchor point options | D-Ring With Isolator &Washer: D-Ring are powder coated for corrosion resistance, and comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage | Package Includes: 2" Shackle Hitch Receiver, 5/8" Trailer Hitch Pin, 3/4" D-ring Shackle with Shackle Isolator & 2PCs Washers kits, protect the bumper from scratches and rattling.2 Years Warranty Honored by Nilight

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away | Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package includes: 1x 5 pin rocker switch, 1x jumper wires set, 1x wiring diagram.

Super Bright Amber Light: Double row High-quality 3030 SMD LED chips emit bright 3985K yellow light to dispel darkness and can be more penetrating in rainy, snowy and foggy weather, give safe view in most of bad weathers, make driving safer | Side Shooter Design: Designed with side lights at two ends to work with the spot at the front. Perfectly combines spot and flood light beam, shoots out a 150° wider and further light coverage to clear darkness and potential hazard, increasing your driving safety. Works great as fog lights, side lights, driving lights, auxiliary lights etc | Excellent Performance: Made of corrosion-resistant 6063 Aluminum profile with thermal grease can improve the heat dissipation ability, effectively extend the lifespan to over 50,000 hours | Wide Applications: With adjustable mounting bracket, easy to install on your 12-24V Off Road vehicle, truck, tractor, off road, jeep, pick up, SUV, ATV, UTV, golf cart. Perfect for night fishing lovers' fishing boat, pontoon boats, yachts, sailboats, house boats, rowboats, paddle boats | Package include: 2PCS 60W Amber Side Shooter LED Pods and Mounting Brackets

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling underglow lights, LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram.

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away | Wide applications: Available for controlling LED light bar, cube lights,LED work lights,spot lights,fog lamps, driving lights, headlights, taillights, off road lights, etc | The package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X wiring diagrams.2 Year Warranty by Nilight.

Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety | Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare | Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse | Considerate Design for You: | Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack.

Incredible brightness: we adopt double-row LED design, which makes the lumen output is 200% brighter than the normal single-row LED | Off-road Adventure design: it is made of durable rustproof flexible aluminum substrate and filled with watertight silicone, which meets the international IP67 standard | Easy to install: no need to drill once applied, the tough-as nails 50lb-rated Automotive adhesive will not fall off, then use our 4-pin tow connector for quick connection. Plug and play | 5-Function: supports five functions: running light, Brake light, left turn signal right turn signal and reverse light | Widely applicable: this flexible strip is 60 inches long and is suitable for most pickups, trailers, truck, towing vehicle, cars, SUV, RV, Van, etc. | Fit type: Universal Fit

Impressive Brightness: The 3PCS light strip includes 270 PCS 5050-SMD LED chips, outputs a 3900LLM 6000K super bright white light to light up your entire truck bed. | Quick Installation: Peel and stick, the self-adhesive tape with tough-as nail adhesive enhancer for strong sticking. You can also add on the included mounting hardware for extra security. | Ease and Safe Electrical Hookup: Come with splitter cable, 5A inline blade fuse, on/off switch, extension cable, mounting hardware for all your wiring needs. Always ensure the circuit safety for your on-road driving. | Flexible & Durable Design: The light strip is in IP67 sealed housing, well protect strip against raindrop, dirt and sand, super durable and flexible with up to 30, 000 hrs lifespan | Wide Application: Can be widely used for RV Awning Light, truck bed light, step bar led light, side door light etc.

Specification: 4 Pin Rocker Switch, Rated at 12V DC/20 Amp, 24V DC/10Amp. Switch function: ON-OFF-ON,amber backlight. | SPDT Switch: The turn signal switch has 3 positions, you can control the turn signal light to left and right by pressing the switch to the corresponding positions. The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn. The middle words “TURN SIGNAL” stands for nothing and it’s an off position. | Sturdy and durable: This switch is made of high-quality plastic and well-conductive pins; The laser-etched pattern is not easy to fade away and it’s built-in two premium LEDs, emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Easy Installation: This 4 Pin rocker switch fits Nilight rocker switch panels and switch holders, it’s the same size with other 5 Pin and 7 Pin rocker switches. Suitable for installing on any 12/24V DC cars, trucks, RVs, Trailers, Campers etc to control the signal lights. | Package includes: 1x 4 pin rocker switch, 1x jumper wires set, 1x wiring diagrams.

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away | Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc | Package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams.

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams.

Specification: 4 Pin Rocker Switch, Rated at 12V DC/20 Amp, 24V DC/10Amp. Switch function: ON-OFF-ON,green backlight. | SPDT Switch: The turn signal switch has 3 positions, you can control the turn signal light to left and right by pressing the switch to the corresponding positions. The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn. The middle words “TURN SIGNAL” stands for nothing and it’s an off position. | Sturdy and durable: This switch is made of high-quality plastic and well-conductive pins; The laser-etched pattern is not easy to fade away and it’s built-in two premium LEDs, emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Easy Installation: This 4 Pin rocker switch fits Nilight rocker switch panels and switch holders, it’s the same size with other 5 Pin and 7 Pin rocker switches. Suitable for installing on any 12/24V DC cars, trucks, RVs, Trailers, Campers etc to control the signal lights. | Package includes: 1x 4 pin rocker switch, 1x jumper wires set, 1x wiring diagrams.

SPDT Switch: The turn signal switch has 3 positions, you can control the turn signal light to left and right by pressing the switch to the corresponding positions. The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn. The middle words “TURN SIGNAL” stands for nothing and it’s an off position. | Specification: 4 Pin Rocker Switch, Rated at 12V DC/20 Amp, 24V DC/10Amp. Switch function: ON-OFF-ON,green backlight. | Flasher Relay: 3 wire electronic LED 12V flasher relay Using international standard pins, plug and play and easy installation.This will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard. | Fitment: The turn signal switch kit suitable for installing on any 12/24V DC cars, trucks, RVs, Trailers, Campers and most motorcycle , ATV, UTV, golf cart etc to control the signal lights. | Packaging includes: 1x 4 pin rocker switch, 1x Flasher Relay, 5x blue Connectors, 1x jumper wires set, 1x wiring diagrams.