Outstanding Brightness: Include 24pcs of bright white SMD LEDs, the light has 2 brightness levels, high brightness is for reverse back up light and low brightness is for tail light. Clear brightness changes help to alert vehicles behind | Screws Installation: Each light is equipped with 4pcs self tapping screws. Firstly, find a suitable installation location and reserve a small hole for wiring. Then fix the light onto the installation surface using the included screws. Then wire it: white wire for Ground, red wire for reverse back up lights and black wire for tail light | Sealed IP67 Waterproof: Ultrasonic combined with lens and housing to form a strict sealing and waterproof design. Glue has been added around the wires on the back to ensure sealing and effectively protect the circuit board inside the light. And it will not affect the surface mount | Wide Application: Fit for 12V DC trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, Boats etc. Function as reverse back up/tail light | Package Include: 2PCS 6inch 24LED oval tail light, 8pcs self tapping screws

Awesome Brightness: Each tail light has 23PCS high-quality LED chips to output two levels of ultra bright red light and one level of white light. Low brightness red light for running light, high brightness red light for brake turn signal lights, and white light for reverse back up light. Improving visibility and ensuring you a safer night | Quick installation: First, successively install the rubber grommet, oval taillight with 3 wires. Then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. Last connect the 3 wires to the corresponding wires on vehicles | Upgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet. These help the light and grommet fit perfectly and firmly on mounting bracket, and the 3 wires attaches tightly onto the light. Shake proof, there will be no worries of loosing light or wires | Ready For The Weather: The oval taillight is highly silicone sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. The mounting bracket is a durable metal coated with high-quality black powder. It is not easy to lose paint and rust | Extensive Application: Universal fit for DC 12V system, function as stop brake turn light, reverse back up and tail light for all kinds of trucks, trailers, tractors, Boat, luggage rack, special vehicle, etc. Just make sure the hole size before you purchase

Awesome Brightness: Each tail light has 10PCS high-quality 3030 SMD LEDs to output super bright red/amber/white light. The upgraded aluminum substrate dissipates heat faster, helps stabilize the circuit, and effectively extends the lifespan of the lights. | Easy Installation: Comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”. If there are no reserved holes, you can use our size cardboard to drill holes | Upgraded Unique Design: Light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shakeproof, there will be no worries of loosing light or wire | Ready For The Weather: The light adopts a fully sealed design, achieving IP67 waterproof rating, waterproof and dustproof, and can be used in any weather. Extend the lifespan of the lights | Universal Application: Work on 12V DC system, function as stop/turn/reverse light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase.

Specification: 20A@12VDC; 10A@24VDC; 20A@125VAC; 10A@250VAC, this reverse polarity switch can be used under DC and AC circuits | Switch Type: DPDT on off on Momentary. Reset automatically ( returns to off position ) when released | Usage: The DC motor will reverse the motor direction with the switch when hooked red to + VDC and Black to - VDC, and Blue to the Motor. It is configured for polarity reversing. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction | Mounting Hole Size: 29 x 21mm/1.14" x 0.83" (LxW); Product Size: 31 x 25 x 35mm/1.21" x 1" x 1.4" (LxWxH) | Product Includes: 1PC 6Pin Polarity Reverse Rocker Switch, Jumper Wires

Specification: 20A@12VDC; 10A@24VDC; 20A@125VAC; 10A@250VAC, this reverse polarity switch can be used under DC and AC circuits | Switch Type: DPDT on off on latching switch with 2 circuits. Can control up to 2 loads | IP67 Waterproof Rate: The switch is wrapped with a silicone sleeve, prevents the water gets into the switch contacts. Enhance it’s lifespan | Mounting Hole Size: 28 x 22mm/1.1" x 0.86" (LxW); Product Size: 39 x 29mm/1.54" x 1" x 1.14" (LxWxH) | Product Includes: 1PC 6Pin on off on Rocker Switch

7 Pin to 4/5 Pin Trailer Adapter:This 7 Pin Round to 4/5 Pin Trailer Adapter design to connect and transmit electrical signals between the tractor and the towed vehicle. It combines 4 way plug and 5 way plug, 2 in 1 design. Converts the 7-way trailer connector on the vehicle to a 4-way or 5-way connector to match the trailer, so you can use this for anything from your wiring harnesses on your towing vehicles or boat trailers. | Reliable Connection: Sturdy, heavy duty, solid and ready to go. Come with dust cover protect terminal from dust and water. Constructed with dust-free and high-impact glass-filled nylon available for used at any outdoor conditions. | Multiple Use: Combines 4 way plug with 5 way plug, and can be used by most trailers, allowing for versatile towing options. Design eliminates the need for cutting or splicing, hassle free setup, easy to install and remove. 7 pin to 4/5 pin trailer adapter features two handles on either side of the plug for a better grip when plugging in or unplugging trailer wiring. | Application: The 7 round to 4/5 pin trailer adapter easily synchronizing the trailer's signal and tail lights without rewiring. Suitable for towing rv, carts, trailers, pickups, trucks, ships, motorcycles, bicycle frame, and other cars which come with American sockets. | Package Includes: 1x 7-Way Round to 4-Way 5 Way Flat Trailer Adapter, 1x User Manual, 2 Years Warranty by Nilight.

Standard & Strong Fixation: Standard plug internal design with strong fixing, this trailer hitch wiring adapter plugs into any standard 7-way RV blade, connecting the taillights/turn signals/trailer brakes and brake lights. Note: Designed to match 6-Pin trailer with Center Pin - Brake. | Easy Installation & disassembly: Simple plug-and-play, install or removal our trailer adapter with no tools. Lock the adapter into your 7-WAY BLADE socket, then plug in your 6-WAY ROUND trailer. | Durable Construction: Constructed with dust-free and high-impact glass-filled nylon housing with excellent water resistance, high temperature resistance, wear resistance and corrosion resistance, available for used at any outdoor conditions. Brass and Tin-Plated terminal ensure great conductivity. | An Adaptable Adapter - Suitable for both types of 6-way round trailer plugs, the housing can be easily opened and the wires re-positioned to match your needs. | Package: 1x 7 pin to 6 pin Trailer Wiring Plug Adapter, 1 x User Manual, 2 Year Warranty by Nilight.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 orange LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Waterproof Switches & Aluminum Panel: The item is made of waterproof switches and aluminum panel, which is sturdier and more durable than plastic panel. The item has a unique technology in the waterproof structure. The ultra-thin silicone film prevents water from entering the inside of the switch panel, ensuring the inner cavity is dry, avoiding short circuits, and making the boat rocker switches safer during use. | 5 Pin SPST Design: 5 pin on-off rocker switch with SPST design (single pole single Throw).Switch comes with a pre-wired wiring harness, simple installation. | Premium LED & DIY Sticker: Our rocker switches have 2 purple LEDs, they can illuminate and help you to find the switches in the dark easily, and you still can assign your switches as your needs with the DIY sticker, they will give you a good experience. | Wide Application: Standard 5 Pin switch, rated at DC 12V/20Amp and DC 24V/10Amp, perfect for controlling Led Light Bars, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc. Widely used on car, motorcycle, SUV, ATV, UTV, boat, marine, ship, yacht etc. | Package Includes: A pre-wired rocker switch panel, 4 Screws, 1 set of DIY stickers, a wiring diagram.

Sturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving | Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface | Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle | Easy installation: pre-drilled hole, allows more lights to be added on vehicle without drilling, Allen hex key included for quick installation | Package include: 4 Pcs LED light bar mounting bracket | Fit type: Universal Fit

High Brightness: Total of 8 Lighting Pods housing a total of 24 Ultra-Bright SMD 2835 LEDs. It is bright enough to allow you to work after dark without having to hold a flashlight or plug in a portable work light | Practical Design: Each pod equipped a plug, plug between each unit allows flexibility for custom install. You can adjust the pod length you need freely | Durable & Weatherproof: IP67 Waterproof Rate, design to withstand harsh weather conditions. (Rain, Snow, etc.) | Easy to Install: The reliable tape can be quickly installed and can be fixed with screws to be more secure; In addition, each strand with a switch, so you can freely control your LED lighting pods, has 21 feet of wire per strand (4 pods per strand), 2 feet of wire between each pod | Application: It can be used in a variety of interior and exterior applications including Under Car, Underglow Footwells, Pickup Truck Beds, Rock Lights, Running boards, tonneau cover, etc. Compatible with most pickup such as ford, dodge ram, Chevrolet, toyota, trucks, RVs, SUVs, UTV, ATV, motorcycle, jeeps, boats, etc.

Top LED Quality: 9 upgraded 3030 SMD LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare | Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety | Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse | Considerate Design for You: Comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting | Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 2 pcs trailer light bar and hardware pack

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams..

Easy to install and use: 7 pin on-off rocker switch with DPDT design (double pole double Throw), simple installation, can control 2 circuits. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc.

Connector type: SPST, 2 terminal pin on/off. Power: 15A 250VAC/20A 125VAC | Material: Plastic and metal. Solid connection switch with waterproof rubber cap, more convenient to operate. Delicate appearance with strong construction. Look chic and high-end on your equipment | Mechanical life: More than 50.000 cycles. Electrical life: More than 10, 000 cycles | Easy to install: Mounting hole diameter: O12 millimeter. Each of the terminals has a machine screw for quick connections, but also easy to be soldered | Package include: 5Pcs toggle switch, 5Pcs waterproof boot cap

Connector type: SPST, 2 terminal pin on/off. Rating: 12V-20A/2 Pole | Safety cover: Red "aircraft" safety cover prevents accidental start | Easy to use and install: Open the red cover, toggle the switch to "on". Close the red cover to off the switch directly. Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered. | Widely used: Suitable for almost any motorized vehicle such as cars, trucks, boats, ATVs, olives, airplanes, race cars, golf carts or any off road vehicle. | Package includes: 5 PCs toggle switch, 5Pcs Red Cover

Connector type: SPST, 2 terminal pin on/off. Rating: 12V-20A/2 Pole | Safety cover: Red "aircraft" safety cover prevents accidental start | Easy to use and install: Open the red cover, toggle the switch to "on". Close the red cover to off the switch directly. Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered. | Widely used:

3 gang rocker switch aluminum panel with DIY sign stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12 volt and 24 volt vehicle yacht ship caravan truck etc. | Safe and durable built with fuses easy replace and can protect the panel from over-heating over-current over charging and short circuit | Panel size: The aluminum panel dimension length x width x high (3.8''x2.6''x3.4''); Cutout dimensions (2.9''x1.5''x3.5'') | Quality assurance made of strengthened aluminum panel and well-conductive pins ensure long lasting durability highly optimized for general use and will give you a pleasant experience | Package include 1x 3 gang switch panel 1x screw sets 1 set of DIY stickers

Anti-slip Surface:the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint | Universal：It can be used to install almost all LED Light Pods.Easy to install.No any damage to the car surface paint | Stable & Durable:Five Screws are enough to tight the light with the car cover tightly | Made of 304 Stainless Steel, the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion

【Excellent Towing Power】- Shackle Hitch Receiver Set was made of high-strength drop forged steel, with a rated working load of 11,000 LBs and a breakpoint of 45,000 LBs, over double the weight of standard truck | 【Heavy Duty and Solid】- Made of Heavy Duty Drop Forged Steel, with powder coated and electro-galvanized providing durable and strong protection against the hardest of conditions | 【Wide-Application】- The Shackle Hitch Receiver fits all standard 2" tow receivers, and the dual hitch pin holes can be flexible to connect the D-Ring horizontally or vertically provide extensive recovery anchor point options | 【D-Ring With Isolator &Washer】- D-Ring are powder coated for corrosion resistance, and comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage | 【Package Includes】- 2" Shackle Hitch Receiver, Anti-Theft 5/8" Trailer Hitch Lock Pin, 3/4" Anti-Theft D-ring Shackle with Shackle Isolator & 2PCs Washers kits, protect the bumper from scratches and rattlin.2 Years Warranty Honored by Nilight

【Excellent Towing Power】- Shackle Hitch Receiver Set was made of high-strength drop forged steel, with a rated working load of 11,000 LBs and a breakpoint of 45,000 LBs, over double the weight of standard truck | 【Heavy Duty and Solid】- Made of Heavy Duty Drop Forged Steel, with powder coated and electro-galvanized providing durable and strong protection against the hardest of conditions | 【Wide-Application】- The Shackle Hitch Receiver fits all standard 2" tow receivers, and the dual hitch pin holes can be flexible to connect the D-Ring horizontally or vertically provide extensive recovery anchor point options | 【D-Ring With Isolator &Washer】- D-Ring are powder coated for corrosion resistance, and comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage | 【Package Includes】- 2" Shackle Hitch Receiver, Anti-Theft 5/8" Trailer Hitch Lock Pin, 3/4" Anti-Theft D-ring Shackle with Shackle Isolator & 2PCs Washers kits, protect the bumper from scratches and rattlin

【Excellent Towing Power】- Shackle Hitch Receiver Set was made of high-strength drop forged steel, with a rated working load of 11,000 LBs and a breakpoint of 45,000 LBs, over double the weight of standard truck | 【Heavy Duty and Solid】- Made of Heavy Duty Drop Forged Steel, with powder coated and electro-galvanized providing durable and strong protection against the hardest of conditions | 【Wide-Application】- The Shackle Hitch Receiver fits all standard 2" tow receivers, and the dual hitch pin holes can be flexible to connect the D-Ring horizontally or vertically provide extensive recovery anchor point options | 【D-Ring With Isolator &Washer】- D-Ring are powder coated for corrosion resistance, and comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage | 【Package Includes】- 2" Shackle Hitch Receiver, Anti-Theft 5/8" Trailer Hitch Lock Pin, 3/4" Anti-Theft D-ring Shackle with Shackle Isolator & 2PCs Washers kits, protect the bumper from scratches and rattlin.2 Years Warranty Honored by Nilight

【Excellent Towing Power】- Shackle Hitch Receiver Set was made of high-strength drop forged steel, with a rated working load of 11,000 LBs and a breakpoint of 45,000 LBs, over double the weight of standard truck | 【Heavy Duty and Solid】- Made of Heavy Duty Drop Forged Steel, with powder coated and electro-galvanized providing durable and strong protection against the hardest of conditions | 【Wide-Application】- The Shackle Hitch Receiver fits all standard 2" tow receivers, and the dual hitch pin holes can be flexible to connect the D-Ring horizontally or vertically provide extensive recovery anchor point options | 【D-Ring With Isolator &Washer】- D-Ring are powder coated for corrosion resistance, and comes with black isolator and washer, reduce rattling noise and protect your bumper finish from damage | 【Package Includes】- 2" Shackle Hitch Receiver, Anti-Theft 5/8" Trailer Hitch Lock Pin, 3/4" Anti-Theft D-ring Shackle with Shackle Isolator & 2PCs Washers kits, protect the bumper from scratches and rattlin.2 Years Warranty Honored by Nilight

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling Aux Lights, LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram.

Heavy Duty: ABS plastic housing and premium copper terminal, durable made for safety use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage. | Purpose: eliminate any power from the battery when vehicle or boat is not in use, disconnects the battery safely. Avoid battery drain off. | Operation: On-Off, 2 positions, Continuous Rating : 100Amps 32VDC Max. Intermittent Rating : 150Amps Cranking Rating : 500 Amps 5 sec. | Compatible: used for 12 - 32VDC systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Widely used for cars, marine boats, RVs, campers, travel trailers, trucks, ATVs, UTVs, battery banks and other devices. | Package include:1x 100A battery disconnect switch with wiring diagram. 2 Year Warranty by Nilight.

Heavy Duty: ABS plastic housing and premium copper terminal, durable made for safety use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage. | Purpose: eliminate any power from the battery when vehicle or boat is not in use, disconnects the battery safely. Avoid battery drain off. | Operation: On-Off, 2 positions, Continuous Rating : 200Amps 32VDC Max. Intermittent Rating : 300Amps Cranking Rating : 1000 Amps 5 sec. | Compatible: used for 12 - 32VDC systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Widely used for cars, marine boats, RVs, campers, travel trailers, trucks, ATVs, UTVs, battery banks and other devices. | Package include:1x 200A battery disconnect switch with a wiring diagram. 2 Year Warranty by Nilight.

Heavy Duty: ABS plastic housing and premium copper terminal, durable made for safety use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage. | Purpose: eliminate any power from the battery when vehicle or boat is not in use, disconnects the battery safely. Avoid battery drain off. | Operation: On-Off, 2 positions, Continuous Rating : 300Amps 32VDC Max. Intermittent Rating : 450 Amps, Cranking Rating : 1000 Amps 30 sec. | Compatible: used for 12 - 32VDC systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Widely used for cars, marine boats, RVs, campers, travel trailers, trucks, ATVs, UTVs, battery banks and other devices. | Package include:1x 300A battery disconnect switch with a wiring diagram. 2 Year Warranty by Nilight.

Heavy Duty: ABS plastic housing and premium metal terminal, durable made for safety use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage. | Purpose: eliminate any power from the battery when vehicle or boat is not in use, disconnects the battery safely. Avoid battery drain off. | Operation: On-Off, 2 positions, Continuous Rating : 50Amps 50VDC Max. Intermittent Rating : 75Amps Cranking Rating : 300 Amps 5 sec.Termination Stud Size: M4xP0.7 | Compatible: used for 12 - 48VDC systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Widely used for cars, marine boats, RVs, campers, travel trailers, trucks, ATVs, UTVs, battery banks and other devices. | Package include:1x battery switch with wiring diagram. 2 Year Warranty by Nilight.

Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits. Design for 2 batteries vehicles, can switch battery 1 / battery 2 separately or both on and off. | Purpose: eliminate any power from the battery when vehicle or boat is not in use, disconnects the battery safely.Avoid battery drain off. | Operation: 1-2-Both-Off,4 positions, 200A continuous at 12VDC, 300A intermittent at 12VDC, 1000A momentary at 12VDC. | Compatible: used for 12 - 48VDC systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Widely used for cars, marine boats, RVs, campers, travel trailers, trucks, ATVs, UTVs, battery banks and other devices. | Package include:1x battery switch, 4 bolts,3x Copper Ring Terminals,4x Heat Shrink Tubings , 1x hex wrench.

Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light. | Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark. | Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away. | Wide application: Available for controlling bilge pump, LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc. | Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram. 2 Year Warranty by Nilight.

Splits 1 car cigarette port(male plug) to 2 DC ports(female plug). Allows you to connect 2 of your devices simultaneously with this 2-way cigarette lighter socket splitter. Cable length: 25cm/10inch | Plug and work, easy to use without any driver installation, 12V and 24V are both allow, can drive the electronic equipment like Air Compressor, vacuum, driving recorder, car refrigerator, coffee maker , air pump Etc. | Two-Socket cigarette lighter, male plug with power indicator light, when power cord makes contact, the indicator light lights up, avoid multiple operations. | Made from a high-conductivity 16 AWG copper wire and a rated capacity of 15-amperes, Male plug built-in 15 Amp fuse for short-circuit protection, can protect the cigarette lighter and terminal from damage due to overloading. | Package include: 1 to 2 car cigarette lighter splitter with 15 Amp fuse(built in male plug)

Heavy duty wire: high-quality materials, durable in use, easily extend your 12V- 24V DC power source when travelling | Premium quality: good electrical conductivity, high temperature and melting resistant, outstanding bending performance | Plug and play: easy to connect the Male plug to cigarette lighter and Female plug to electrical appliances | Safety protection: the built-in fuse can efficiently protect against overcurrent and short circuit | Package include: 1Pc cigarette lighter extension cord

【Compatible with】Fits for 1999-2006 Chevrolet Silverado, Sierra 1500/1500 HD, 2007 Silverado "Classic", Sierra 1500 "Classic", 1999-2004 Silverado 2500, Sierra 2500, 2001-2006 Silverado 2500HD/3500, Sierra 2500HD/3500, 2000-2006 Tahoe, Suburban 1500/2500, GMC Yukon, Yukon XL 1500/2500 | 【Upgrade & Suitable for More】We thickened the brackets to allow them to bear heavier lights, and enlarged the holes to fit most LED lights from 2inch to 7inch (i.e. suitable for M6, M8, M10 size screws) | 【No Drill】Very easy to install. Just directly install it on both sides factory bolt holes of the engine hood, and use factory screws, no need to drill or cut | 【Excellent quality】Made of thickened solid iron alloy, durable, CNC formed and pressed, precise size, smooth edges, electrophoresis process, covered with thickened black matte powder, durable and non-fading and not easy to scratch | 【Package Include】2pcs mounting brackets

【Compatible with】The LED hood light mount brackets are compatible with 2015-2022 Chevy Colorado and 2015-2021 GMC Canyon | 【Upgrade & Suitable for More】We thickened the brackets to allow them to bear heavier lights, and enlarged the holes to fit most LED lights from 2 inch to 7 inch (i.e. suitable for M6, M8, M10 size screws) | 【No Drill】Very easy to install. Just directly install it on both sides factory bolt holes of the engine hood, and use factory screws, no need to drill or cut | 【Excellent quality】Made of thickened solid iron alloy, durable, CNC formed and pressed, precise size, smooth edges, electrophoresis process, covered with thickened black matte powder, durable and non-fading and not easy to scratch | 【Package Include】2pcs mounting brackets, 1 pack of spare hardware

【Compatible with】The LED hood light mount brackets are compatible with 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Toyota Tacoma | 【Upgrade & Suitable for More】We thickened the brackets to allow them to bear heavier lights, and enlarged the holes to fit most LED lights from 2 inch to 7 inch (i.e. suitable for M6, M8, M10 size screws) | 【No Drill】Very easy to install. Just directly install it on both sides factory bolt holes of the engine hood, and use factory screws, no need to drill or cut | 【Excellent quality】Made of thickened solid iron alloy, durable, CNC formed and pressed, precise size, smooth edges, electrophoresis process, covered with thickened black matte powder, durable and non-fading and not easy to scratch | 【Package Include】2pcs mounting brackets (drive side and passenger side), a pack of spare hardware

Main Purpose: Specially designed for ditch light mounts on 2007-2013 GMC Yukon Sierra & Chevy Suburban Tahoe Silverado, providing a convenient way to mount aftermarket lights at lower windshield for better side way visibility on your night ride | Compatibility: 07-13 Avalanche, 07-13 Silverado 1500, 07-14 Silverado 2500 HD, 07-14 Silverado 3500 HD, 07-14 Suburban 1500, 07-14 Suburban 2500, 07-14 Tahoe; 07-13 Sierra 1500, 07-14 Sierra 2500 HD, 07-14 Sierra 3500 HD, 07-14 Yukon, 07-14 Yukon XL 1500, 07-14 Yukon XL 2500, does Not fit 2007 "Classic" model pickups | Perfect Fitment: Work perfectly with small pod lights work lights within 2 inch to 5 inch and sit at exact Position without blocking the windshield wiper or affecting the the opening/closing of the hood | Sturdy-Built and Durable: Sturdy built with heavy duty metal, ensuring a stable mount without vibration or bounce while driving. Also brackets are painted with quality wrinkle finishes, can withstand heavy beat but still remain beautiful outlook, no fading or chipped paints, anti-rust | Simple Installation: Just firstly remove hood hinge mount bolts, line up ditch light bracket to the mounting holes, and then bolt on and tighten up. (Note: Remove bolts and bolt back on each hood hinge one by one instead of entirely remove both bolts at a time to prevent hood become misaligned and add on extra work)

Main Purpose: Specially designed for 2005-2015 2nd Gen Toyota Tacoma, provides a convenient way to mount aftermarket lights at windshield base for better side way visibility on your night ride | Perfect Fitment: Work perfectly with small pod lights work lights within 2” to 5” and sit at exact position, remaining sufficient clearance for hood to fully open without blocking windshield wiper | Durable Coating: Made of quality powder coating, no fading or chipped paints, anti-rust | Sturdy built with thick metal, ensures it a stable mount without vibration while driving | Simple Installation: Just firstly remove hood hinge mount bolts, line up ditch light bracket to the mounting holes, and then bolt on and tighten up | (Note: Remove and bolt back on each hood hinge bolt one by one instead of entirely remove both bolts at a time to prevent hood become misaligned and add on extra work).

Main Purpose: Specially designed for 2016-2020 3rd Gen Toyota Tacoma, providing a convenient way to mount aftermarket lights at windshield base for better side way visibility on his night ride | Perfect Fitment: Work perfectly with small pod lights work lights within 2” to 5” and sit at exact position, remaining sufficient clearance for hood to fully open without blocking windshield wiper | Durable Coating: Made of quality powder coating, no fading or chipped paints, anti rust | Stable Mounts: Sturdy built with thick metal, ensure it a stable mount without vibration while driving | Simple Installation: Just firstly remove hood hinge mount bolts, line up ditch light bracket to the mounting holes, and then bolt on and tighten up. (Note: Remove and bolt back on each hood hing bolts one by one instead of entirely remove both bolts at a time to prevent hood become misaligned and add on extra work)

Momentary Switch: Heavy duty DPDT reverse polarity switch resetting automatically (returns to off) when released. Controls the up/down, clockwise/counterclockwise motion of DC loads (e.g. motors, hoists, cranes, linear actuators etc.). | Dual Operation: This momentary electrical system switch is used for jogging or inching operations. A DPDT switch is equivalent to two SPDT switches. It routes two separate circuits. Connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which two contact can be routed. Always make sure you are using a switch and wire sufficient to handle the load you are carrying. In higher draw applications, a relay may be needed. | Wide range of application: Universal fit for all cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Marine boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans etc; Mainly used to control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump or led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc. | Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience. | Package Includes: A 7 PIN switch, jumper wires set and a wiring diagram.

50A to 30A Adapter: Allows you to charge Your EV in the garage or home with 4-prong 14-50R outlets. The NEMA 14-50P 4-prong plug is compatible with the 14-50R outlet. Note: 125V-250V Use for Dryer Power Extension and Level 2 EV Charging. Not for RV. Please check if the receptacle of your home outlet is NEMA 14-50R | Electrical Rating: 50 Amp (NEMA 14-50P) male to 30 Amp (NEMA 14-30R) female heavy duty power adapter. Rated for 125/250V and 6250W . Length 13.6 Inch. Constructed with 4 of 10 AWG wires to ensure the high electrical conductivity. | High Performance: Constructed with 100% pure copper with full 10 gauge wires ensuring high conductivity. The wires are stranded copper, it’s very flexible and the STW jacket is very durable. The jacket is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements, wear and tear. | Weather Resistance: The cord is coated with a heavy-duty flame retardant, heat resilient PVC sheath that serves as protection from the outdoor elements. Protect the wire from wind, rain, snow, soil, and rocks for long-lasting durability. Weather resistant thermoplastic jacket that performs under extreme weather conditions. | Package includes: 50AMP to 30AMP 4 prong EV charger adapter cord; 2 Year Warranty by Nilight.